Search  for anything...
WEN

WEN Benchtop Belt and Disc Sander with 4 x 36 in. Belt, 6 in. Disc and Cast Iron Base (6502T)

    • Based on 6,389 reviews
Condition: New
Checking for product changes
$99.00 Why this price?
Save $35.99 was $134.99

Buy Now, Pay Later

As low as $16.50 / mo
  • – 6-month term
  • – No impact on credit
  • – Instant approval decision
  • – Secure and straightforward checkout

Ready to go? Add this product to your cart and select a plan during checkout. Payment plans are offered through our trusted finance partners Klarna, PayTomorrow, Affirm, Afterpay, Apple Pay, and PayPal. No-credit-needed leasing options through Acima may also be available at checkout.

Learn more about financing & leasing here.

Selected Option

Free shipping on this product

30-day refund/replacement

To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

Availability: In Stock.
Fulfilled by Amazon
Arrives Friday, Nov 8
Order within 21 hours and 56 minutes
Available payment plans shown during checkout

Style: 6-inch Disc w/ Cast Iron Base


Features

  • Two-in-one sanding machine includes both a 4-by-36 inch belt and a 6-by-6 inch disc
  • Belt tilts anywhere from 0 to 90 degrees
  • Sturdy cast iron base prevents any heavy vibrations
  • 4.3 Amp motor provides up to 3600 RPM
  • Tension release lever provides for simple changes between sandpaper grits

Description

Remember when you needed a versatile and reliable sander? The WEN Belt Disc Sander easily sands, smooths and removes all of the jagged edges and splinters on your wood and lumber. With a 4.3 amp 1/2 HP motor, users should anticipate enough power to prevent this machine from bogging down under a large load. Changing the spacious 4-inch-by-36-inch belt is a breeze, so you’ll have the power to switch and replace sand paper grits as needed without wasting any time. The belt also tilts anywhere from 0 to 90 degrees to accommodate the needs of your particular workpiece while the heavy cast-iron base prevents vibrations. With all of this in addition to the 6-inch side disc, you’ll have the capacity to sand whatever your heart desires. The sanding disc is accompanied by a sturdy cast-aluminum work table. Included with the belt disc sander is a miter gauge for steady sanding on angled edges, a stop bar for safety and control, and a 2.25 inch dust port to connect a dust extractor. And because this is a WEN Product, your purchase comes backed by a two-year warranty, a nationwide network of skilled experienced technicians, and a helpful customer service line all to make sure that you remember WEN.

Brand: WEN


Product Dimensions: 22"L x 11"W x 12.5"H


Grit Type: Coarse


Voltage: 120 Volts


AC Adapter Current: 4.3 Amps


Brand: ‎WEN


Product Dimensions: ‎22"L x 11"W x 12.5"H


Grit Type: ‎Coarse


Voltage: ‎120 Volts


AC Adapter Current: ‎4.3 Amps


Maximum Rotational Speed: ‎3600 RPM


UPC: ‎044459650249 797874145875


Global Trade Identification Number: ‎49


Manufacturer: ‎WEN


Part Number: ‎6502T


Item Weight: ‎37.9 pounds


Country of Origin: ‎China


Item model number: ‎6502T


Is Discontinued By Manufacturer: ‎No


Size: ‎6-inch Disc w/ Cast Iron Base


Style: ‎6-inch Disc w/ Cast Iron Base


Pattern: ‎Disc Sander


Item Package Quantity: ‎1


Measurement System: ‎Metric


Included Components: ‎Disc Sander


Batteries Included?: ‎No


Batteries Required?: ‎No


Date First Available: August 18, 2018


Frequently asked questions

If you place your order now, the estimated arrival date for this product is: Friday, Nov 8

Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

  • Klarna Financing
  • Affirm Pay in 4
  • Affirm Financing
  • Afterpay Financing
  • PayTomorrow Financing
  • Financing through Apple Pay
Leasing options through Acima may also be available during checkout.

Learn more about financing & leasing here.

Similar Products

Top Amazon Reviews

    • Good value and competitors look similar
Style: 6-inch Disc w/ Cast Iron Base
Even the brand names have similar designs. So if they are all manufactured in a similar factory (if not the same), then get this one. I had a Harbor Freight similar sander, but it was NOT built as good and was an older design. It was made of sheet metal for the frame (that's bad). Worked great for an occasional use home garage unit, but not for woodworking. But not for more than 15 minutes of use at a time (I found out later). So I bought this WEN to replace it after only 3 months of my new woodworking hobby. I have now used this unit for 2-years - several days in a week and several hours each time. Likes: Better fence (than most), can be aligned to run larger width boards across without hitting the disc sander or the fence mount (you can if set the gap too high). It's been reliable, after a year, I did notice some bearing noise - so a little lubrication maintenance and thorough cleaning are needed from time to time (as all should). Easy belt changes (no screws to remove or covers). There is one pivot bold to loosen to get the belt off when in the flatbed. That was not the case with the crappy Harbor Freight sander, 6 screws, and more...shrouds to remove each time. Do you know how many belts it takes to sand wood from 80-320 grit??? (makes a huge difference)! Dislikes: all brands are like this: the fence is too high up on the bed, could get 2 more inches (in many cases). I ended up salvaging my harbor freight fence to gain 1 inch on the length of wood I could sand, but then the fence frame is in the way for wider pieces. I'm likely will have a custom fence made with the extension length to give me the full length of the flatbed (but WEN's fence is better than most I've seen). The disc sander deck can get out of alignment easily (only one mount/angle adjustment screw) and the cheap miter gauge and is not accurate with the loose track slop (like most brands-all too cheap). I could use a better dust collector inlet for use as a flatbed sander - but that would likely impede the vertical sanding configuration. The inlet probably works great for vertical sanding...but not as well for woodworking sanding in the flat configuration. But the other thing I like about the WEN is the reality that all the other major brands have the exact same model (design) - even the big national high-end woodworker brands (just different color plastic parts, but virtually the same plastic parts-so obvious). Maybe they have a nicer miter gauge or a thicker metal fence or thumb screws for adjustments, but the differences are little. So I would not pay 2x the cost. Overall, I'm happy with it since I'm not seeing much better designs even from the national high-end brands. I would rather replace this unit 2x than spend the $ on the same design as the others brands. I might still overtax this unit at times, but it has held up so far. One day I will update to a 6" x 48" sander, but for now, this 4" is working out fairly well. Now can I just get a 12" sanding surface out of this one at times? I would recommend this model for this sander design and never recommend the Harbor Freight version - this one is worth the few $ more (but not that much more). ... show more
Reviewed in the United States on November 16, 2021 by N. K.
    • Great value, Great product
Style: 6-inch Disc w/ Cast Iron Base
I did my research on different brands before choosing this Wen product, and I couldn't be happier. For what is considered a economical brand, this product is very well built, sturdy and feels like it will hold up for a long time. It's not overly loud when in use either. The miter fence is a little on the cheaper side but definitely use able. I love how easy it is to change the paper. Highly recommended for a cost effective option. It's a nice addition to my small shop! ... show more
Reviewed in the United States on September 3, 2024 by Johnnycakes
    • Works ok, good price
Style: 6-inch Disc w/ Cast Iron Base
The sander works ok for its size. If you need to use it on lots of hardwoods, it bogs down easy. For the cheap cost it’s a great starter sander. If you are looking for one that you are going to use a lot, save up for a good one.
Reviewed in the United States on August 30, 2024 by Kelly Fiori
    • Wen 4 x 36 bench sander with 6” disc
Style: 6-inch Disc w/ Cast Iron Base
This little sander that looks like a toy and sells for $100. Is one excellent tool. I have been sanding some small cubes (2 1/2 x 2 1/2 x 2 1/2) on it for three days now (8-9 hr days, constantly running the Wen, constantly) changed belts several times, very easy. The tracking is unbelievably constant, no variation whatsoever. Once it’s set the belt just centers itself. However, adjustments are easy and simple. This is an unbelievably great machine for small parts sanding, and the price is ridiculously low. The 6” disc can be handy, it has a removable table with a T guide. All in all a well engineered/designed tool, you can’t go wrong purchasing this Wen sander. Highly recommended, five Stars or more! ... show more
Reviewed in the United States on September 9, 2024 by Amazon Customer
    • Very nice for the price
Style: 6-inch Disc w/ Cast Iron Base
Works well. Would love a clip to hold the Allen Wrench
Reviewed in the United States on October 19, 2024 by Eileen M.
    • Opens Up A Whole New World For Attacking Curves and Round-Overs In Wood
Style: 6-inch Disc w/ Cast Iron Base (2015 Model)
This may not be what some would consider to be the very best brand on the market, but for my purposes it is fantastic. I don't know why I haven't purchased one of these dual sanders in the past since I do a lot of home remodeling, with just about every power tool necessary (Delta Contractors table saw, Delta Contractors chop saw...both of which are over 20 years old and built like a rock and supremely accurate...Kobalt dual compound sliding 12" miter saw...Dewalt Jig Saw, Tabletop Drill Press which is also over 20 years old, along with just about every hand held power tool out there). When I first started using this it was one of those DUH moments as I contemplated the many things it could have done for me on past projects. My first bout of enthusiasm occurred when I started making zero clearance inserts for both Delta saws, which have very thin plate inserts, which are curved at both ends. I had been using a scroll saw for these zero clearance pieces and had to make some pretty accurate radius cuts with the scroll saw, to fit inside the wider throat of the metal plates. These curved end inserts were only 1/2" wide, which made it rather difficult to perfect a smooth curved cut with the scroll saw, since the very thin blade of the saw, wanted to deflect off of my cut line as I pushed the material. I wasn't entirely happy with the radiused end cuts, since I am a perfectionist who wanted them to look like they were "store bought". When I got the Wen, I proceeded to rip a couple of new 1/2" wide strips for new inserts, scribing the shape of the OEM metal plates. Then took them over to the disc sander and pressed the ends gently into the rotating disc (on the down stroke side). I was able to follow the curve of my scribed line, perfectly, ending up with a very smooth radius. So, it was love at first sight and I can't wait to think of all the other cool things which are possible with the Wen. I noticed that Menards has a different brand on the shelf, which is obviously made by the same manufacturer because they are absolutely identical except for graphics/logos/colors on the Menards unit. I bought the Wen on Amazon. I have also used the belt sander which is very user friendly if you simply watch what you are doing. I currently installing shiplap in my kitchen and I used cove molding in the corners to transition perfectly between the shiplap panels where they meet in the corners. Being an older home, with some wall shifting, in a few places the cove molding was not flush with the shiplap, so when I went to install flat ceiling trim, I decided not to do mitered corners which would have been pretty dicey to get perfect, thus I decided to use square stops for the ceiling trim to butt up to. But could not get the square stock to sit tight and flush in the corners because of the cove sitting out just a hair. So I used the belt sander to very easily sand the rear corner of the stops down at a triangular angle in order for it to clear the cove molding. Perfect solution with little effort to get everything to rest flush with the shiplap. This is something I would have had to do (dangerously) with my table saw, set at a ripping angle, with corner blocks which were too short to do effectively, even if it were not dangerous. Out of curiosity, I scribed a half circle at the end of a 2x4, to see if I could create a perfect semi-circle on the end, without using a jig saw or band saw to curve the end. Used the disc sander and it was a piece of cake. So much easier, accurate and safer than either of the aforementioned. I have read some reviews which complained about the light weight plastic fence, which I can understand, but it is really there, only to keep your fingers safe as something to sandwich between your fingers and the fence. It is an aid, not a cure for doing things that are better done with other tools. The only thing that I think is really lacking which would have elevated the disc sander use, regardless of plastic or metal, would be a way to lock the fence into place, since it slides totally free, as it is currently designed. One of the first things I do when I get any new tool, is to get out my speed square or other square and true up the working surfaces to 90 degrees in as many directions as possible. The angled plate is pretty tough to get exact, due to deflection in the plate when you tighten down angle finder on the side. So I won't be using this for any critical angle sanding. All in all, I love this new addition to my shop and based on other positive reviews, I expect it to be very durable over time. I got the cast iron model and glad I did over the lighter weight unit. ... show more
Reviewed in the United States on October 26, 2017 by Born in Kansas

Can't find a product?

Find it on Amazon first, then paste the link below.