Search  for anything...
Ortur

ORTUR Laser Engraver, Laser Master 2 S2 LF, 5500mW Laser Engraving Cutting Machine, 0.17 * 0.25mm Fixed-Focus Laser Cutter

    • Based on 771 reviews
Condition: New
Checking for product changes
$299.99 Why this price?

Buy Now, Pay Later

As low as $50.00 / mo
  • – 6-month term
  • – No impact on credit
  • – Instant approval decision
  • – Secure and straightforward checkout

Ready to go? Add this product to your cart and select a plan during checkout. Payment plans are offered through our trusted finance partners Klarna, PayTomorrow, Affirm, Afterpay, Apple Pay, and PayPal. No-credit-needed leasing options through Acima may also be available at checkout.

Learn more about financing & leasing here.

Selected Option

Free shipping on this product
This item's return window has been extended for the holiday season: Returnable until Jan 31, 2025

To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

Availability: In Stock.
Fulfilled by Amazon
Arrives Sunday, Nov 17
Order within 21 hours and 18 minutes
Available payment plans shown during checkout

Size: OLM2-S2-LF


Features

  • 5500mW Laser Engraver with Ultra-Fine Compression: Ortur Laser Engraver has 32-bit professional motherboard, which is smarter, faster, more accurate and easier to use. Engraving area is 390*410mm. Ultra-fine laser focal area is reduced to 0.17*0.25mm, The engraving machine speed can be as high as 5000 mm/min. The laser cutter can cleanly cut 6mm pine board in one pass. The laser cutter comes with an air assist nozzle, use with our air pump could support a higher speed and cut better.
  • Safety protection: Laser Engraver newly upgraded Safety protection. 1. There is a G-sensor on the motherboard, When the engraving machine is displaced, it will automatically stop the laser; 2. If your computer system halted or USB cable disconnected, led to that the laser engraver stops moving, the laser beam will stop, to prevent fire. 3. The engraving machine is turned on, but there is no movement for a long time, the laser will be turned off automatically.
  • New eye protection design: The laser engraving machine with newest panoramic filter glass protective cover plays a very good role in protecting your eyes, filtering 97% of the ultraviolet light to perfectly protect your eyes to reduce the cost of your goggles and the inconvenience of wearing goggles.
  • Extensive Compatibility & Uses: Ortur laser engraver and cutter can engraving cylinders by add to rotaty rollers. Unleash your creativity on over one hundred materials including paper, bamboo, wood, leather PCB board, aluminum oxide, metal, glass, etc.compatible with various mature engraving software, such as LaserGRBL, LightBurn. The ORTUR laser cutter supports Win 7 / Win 8 / XP / Win 10 / Win 11, and also support MacOS and Linux system.

Package Dimensions: 24.9 x 9.5 x 5.8 inches


Item model number: OLM2S2-LU2-4-LF-US


Item Weight: 8.88 pounds


Manufacturer: Ortur


Country of Origin: China


Date First Available: September 26, 2021


Frequently asked questions

If you place your order now, the estimated arrival date for this product is: Sunday, Nov 17

Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

  • Klarna Financing
  • Affirm Pay in 4
  • Affirm Financing
  • Afterpay Financing
  • PayTomorrow Financing
  • Financing through Apple Pay
Leasing options through Acima may also be available during checkout.

Learn more about financing & leasing here.

Similar Products

Top Amazon Reviews

    • Worth it
Size: OLM2 S2-LU2-2
Oh this thing is awesome and I don't regret getting the little LU2-2 head for it. Compared to my 5.5W the engraving is insanely good and it cuts quite well at 3mm, even cleaner with extra air. I swap my heads a bunch. With 5W I'm cutting 5mm electrical panel plywood cleanly without burning using air assist. Without it, the plywood is too toasty. Consider that when building, but in my tests a beefy fish tank pump or a DC motor airbrush compressor work great. You *will* need smoke evacuation and an enclosure at some point and short of big industrial filtration systems there simply is no way to filter such particles - without it you won't be able to safely or comfortably cut or engrave much of anything, it's not really optional. I installed a window vent system and ran duct to a blower on an enclosure I used the laser to cut. Consider fire suppression, like a simple kitchen flare up it's an easy thing to manage if you are ready for it. Don't do dumb things and do have something nearby for emergencies. I've got a fire blanket, retardant, extinguishers, and simple covers in arms reach so when I light something up the worst thing that might happen is damage to the laser. Air assist also helps mitigate that. What you get is a great laser head, adequate safety glasses for indirect glare, a well designed frame, and a stable ESP32 based controller with good stepper control and a frame that doesn't need a bunch of fiddling to get it set up. I think I could have done this in my sleep, FAR easier than a 3d printer is to set up and using GRBL is so much nicer than trying to emulate support in Marlin and hack your printer to do this, they just aren't appropriate. Lightburn is great software and offers trials, but LaserGRBL has come a long way too and you can get started using that, don't sweat the expense until you get the hang of using it a little. The cable management is handled by a split ring conduit that does act a bit like a reticulated chain but a proper axially constrained drag chain would be best in most cases. The cables are protected and managed and mostly won't drag on the work though. The accuracy is astounding for just being microswitch homed, synchro driven, and I did nothing special to tram it. I can repeatably hit the exact same spot with the laser every time. Protection features for leaving it on without movement and such worked great out of the box, I haven't modified the firmware or settings at all on the machine since I haven't needed to. The price of this machine was a little lower than the parts individually even, I was building my own but when I saw this deal I grabbed it and I totally don't regret it. You're gonna see people running these with no shield on, no enclosure, going all John Wayne with it. Please don't do that without taking the necessary precautions. If you have no pets, bystanders, ignitable material in proximity, and are 100% wearing safety equipment at all times then you're probably good but that's not simple and what if your glasses slip or? I've already had one accident, thankfully not serious, now it's in an enclosure with shielding and I mounted 2 cameras for remote monitoring of the bed and the head, they're cheap USB cameras nothing special but you can manually track them at the workstation or configure Lightburn to do the distortion correction for your lens and stuff and map the coordinates to the bed area like xTool does. If done right, it's very accurate for setting up jobs without moving the work piece or even getting up from the chair. It's a basic machine, but it's got a work area bigger than almost any small-medium sized laser and a ton of versatility thanks to being an open frame system. In some ways you can do a lot more with this than the fancier systems without wasting all that money on hype. My DC compressor runs circles around the $200 pumps and it cost $20 lol, it was just louder until I stuck it in a box with urethane foam baffles. It's all up to you as the machine operator and builder how far you want to take your upgrades based on your unique workflow. If you enjoy hacking on your machines or want to learn how to, you might be glad you didn't buy something more "easy" and less flexible. If you're new, read read read read read and consume every tutorial, the quality of the work you produce with any tool is directly proportional to your own mastery of the tools and techniques. Good luck. ... show more
Reviewed in the United States on February 23, 2024 by James D.
    • Great laser engraver for first timer
Size: OLM2 S2-LU2-2
Review Image by rhuang rhuang
Review Image by rhuang rhuang
The media could not be loaded. This is our first laser engraver so consider we knew nothing about this kind of products before this. We bought this to work on hobby craft projects for home and kids. The product needs assembly, this is only part that I think the Orthur should improve by making more detailed description on the assembly instructions. It took us 20 minutes to put together- but the actual work is not that much, mostly to figure out details not clearly documented. If I am to do it again I can get one assembled under 5 minutes. We used the opensource software recommened, and were able to get our first test artwork engraved in 3 minutes. My 14 year-old son without any previous graphic software experience was able to get every thing to work in under half an hour. You may want to use this in a well circulated area as the engraving does generate some burning smell (which is logical). ... show more
Reviewed in the United States on January 30, 2024 by rhuang rhuang
    • DO NOT ORDER
Size: OLM2-S2-LF
I never write reviews and I often ignore the ones that say "DO NOT ORDER". I'm writing this one because several of my children went together to buy this unit for another sibling. We ended up moving and only got it set up after the move (big mistake). It didn't work. Wouldn't burn in all quadrants and then would stop and burn holes in the wood. Contacted support, only to receive an e-mail stating that the company was in flux and nobody knew who was handling support. Somebody did eventually write me and try to help. Turns out the unit was bad when it arrived (admitted by the company). They shipped me replacement parts, free of charge. They arrived and DID NOT FIX THE PROBLEM. In the meantime, they had closed my ticket, even though the issue wasn't resolved. I reached out again only to receive an e-mail stating that the support site on the Ortur website was no longer valid and they weren't sure who was handling support, but try "these two e-mail addresses". I wrote. Received no response. Wrote again and was told to go to Amazon and contact the seller who sold me the unit on Amazon because ortur.net couldn't help. Funny... the seller on Amazon was Ortur.net. When I try to get support, it sends me to the folks that are saying to go Amazon. Bottom line, my kids are out several hundred of their hard earned money because by the time they finished running me around and waiting on replacement parts, I couldn't send it back. IF you order this unit, check it and send back to amazon immediately if it doesn't work. Ortur currently has NO support and will only give you the run around. I've been working to resolve this issue since last November and it is now mid january with no resolution in sight. UPDATE: Ortur has now responded on here (Amazon) to contact them as they would like to help. This response is AFTER I’ve been writing them since last October (coming up on 5 months). They’ve told me three times after talking back and forth for two weeks to write to a different address after saying repeatedly they would help. I email the other address and receive NO response. The last email I received - again telling me to contact the email address that never receives a response - told me to “have a nice life”. I’m choosing to believe this is a language issue and not as rude as it sounds but they have still done nothing. ... show more
Reviewed in the United States on January 17, 2024 by myTotalHealthMentality

Can't find a product?

Find it on Amazon first, then paste the link below.