Search  for anything...
Polymaker

Polymaker PA6-GF Nylon Filament 1.75mm Grey, 2kg Glass Fiber Nylon Filament 1.75, Cardboard Spool - PolyMide PA6-GF Warp Free Nylon 3D Printer Filament

    • Based on 475 reviews
Condition: New
Checking for product changes
$99.99 Why this price?

Buy Now, Pay Later

As low as $16.67 / mo
  • – 6-month term
  • – No impact on credit
  • – Instant approval decision
  • – Secure and straightforward checkout

Ready to go? Add this product to your cart and select a plan during checkout. Payment plans are offered through our trusted finance partners Klarna, PayTomorrow, Affirm, Afterpay, Apple Pay, and PayPal. No-credit-needed leasing options through Acima may also be available at checkout.

Learn more about financing & leasing here.

Selected Option

Free shipping on this product

Eligible for Return, Refund or Replacement within 30 days of receipt

To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

Availability: 12 left in stock
Fulfilled by Amazon
Arrives Sunday, Nov 24
Order within 12 hours and 21 minutes
Available payment plans shown during checkout

Color: 1.75mm 2kg Pa6-gf, Grey


Features

  • Stiff & Strong & Heat Resistant Nylon Filament - Polymaker PolyMide PA6-GF nylon filament 1.75mm is glass fiber reinforced Nylon 6 filament exhibits excellent thermal and mechanical properties without sacrificing the layer adhesion
  • Wide Application - PolyMide PA6-GF is very strong, durable and features an excellent heat resistance. It can be used in applications requiring torsional, tensile, and impact strength such as bicycle pedals, brackets, jigs, drone frame, prosthetics or handles
  • Tangle Free & Resealable Bag - Our glass fiber filled nylon filament 1.75 is carefully winded to avoid any tangling issues, dried and vacuum sealed in a resealable ziplock bag with desiccant. Please make sure to NEVER let go the tip of the filament as it may create nodes. Holes on the side of the spool can be used to prevent this issue
  • Printing Setting - Nozzle: 280-300 C; Bed Temperature: 25-50 C (Do NOT exceed 50 C); Speed: 30mm/s 60mm/s; Annealing: 80C 6h (To ensure a good heat resistance of your printed part it is recommended to anneal your print model); Bed Surface: almost any surface with a thin coat of PVA glue or Magigoo PA
  • NoteIt is important to have an abrasion resistant nozzle since there is 25% glass fiber inside this Nylon filament. PolyMide PA6-GF is a very stiff filament so it is required to have a good set up to ensure a good feeding (avoiding excessive bending in the filament guide system). It's ultra critical to have your filament enclosed in a dessicant box while printing, and keep your nozzles clean between every 8 prints or so

Brand: Polymaker


Material: Nylon


Color: 1.75mm 2kg Pa6-gf, Grey


Item Weight: 2000 Grams


Manufacturer: Polymaker


Manufacturer: ‎Polymaker


Brand: ‎Polymaker


Item Weight: ‎4.41 pounds


Product Dimensions: ‎10.55 x 10.55 x 3.35 inches


Item model number: ‎PG02003


Color: ‎1.75mm 2kg Pa6-gf, Grey


Material Type: ‎Nylon


Manufacturer Part Number: ‎PG02003


Date First Available: June 15, 2022


Frequently asked questions

If you place your order now, the estimated arrival date for this product is: Sunday, Nov 24

Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

  • Klarna Financing
  • Affirm Pay in 4
  • Affirm Financing
  • Afterpay Financing
  • PayTomorrow Financing
  • Financing through Apple Pay
Leasing options through Acima may also be available during checkout.

Learn more about financing & leasing here.

Similar Products

Top Amazon Reviews

    • This is a serious filament
Review Image by Tonia Tonia
I read some of the reviews in here and was a bit taken aback, but they don't agree with the youtube reviews that are incredibly detailed and rave about this filament....so I gave it a try. The parts I used this for are intake sleeves on an RV8. That's a 220mph two seat airplane, with 3d printed sleeves right at the front. I wasn't at all sure 3d printed material could take it. The first material I attempted was NylonX. After a month long fight with 4 spools used, countless calls and emails with tech support they finally decided their material just could not produce a part this large without significant warp. This is a 20hour print with a .8mm nozzle putting a lot of material down and nylonx warped all over the place. The parts are 9 inches long, 6 wide and 2.5high...hollow in the middle. Perfect recipe for warp. We heated the bed to 115C, heated the enclosure to 60C, garolite, with and without magigoo PA, 30mm brim, raft...it just warped like crazy no matter what we did. Tech support finally gave up it's just too much nylon for too long according to them. I was frustrated to say the least considering how much I spent trying to make that crap work. There is a reason they only sell it on their website and not in here where it can be reviewed. It is strong...but don't print anything of size. So, I went looking for something other than Nylon and stumbled upon Priline carbon fiber polycarbonate with great reviews in here...and poof, two perfect parts easy peasy. One of my favorite youtube channels had a raving review of this CoPA filament and it's complete indifference to warp. It also has a better heat tolerance than the Priline and since I was ready for a redesign of the parts after test flights...I ordered a spool of CoPa to try...but after the NylonX fiasco, I was not hopeful...and had another roll of Priline sitting here waiting. The issue with the Priline is I am right at it's softening temperature....just too close for comfort, not that it ever gave any trouble at all. Just wanted something with a bit more margin. Not only did I print this NYLON without heating the enclosure at all, I had the bed at 45 degrees, used magigoo PA on garolite and NO BRIM. It printed perfectly. Twice. I am blown away. Today, those two parts flew for the first time with zero issues at all. Heat doesn't affect them in the least. Its difficult to believe this material and NylonX are both nylons considering what a massive pain NylonX is and what a breeze CoPA is. No tech support needed. No crazy prep, huge heat or anything odd. It prints like PLA...I take that back, my PLA is printed on a hotter bed than this stuff. It's incredible. Its not as stiff as NylonX....but I suspect Polymaker's Pa6-CF likely is...and it's cheaper. I don't really need that stiffness in my application, but I am tempted to order some PA6-CF just to try it....if it prints anything like CoPA....with carbon fiber....get outa here. :-) As for the reviews in here claiming this material is brittle, has no layer adhesion etc.....its just did 220MPH at the front edge of an airplane with a propeller spinning half an inch away. Brittle? No. Not even close. Now, it was brittle when I attempted to print it too cold. I have a hardened .8mm nozzle (nylonX requirement) so I typically need to be at the top of the temp range since hardened steel doesn't transfer heat as well as brass and I am pushing 4 times the filament that a .4mm nozzle moves. At 260C, my typical half bridge support test snapped easily and the skirt didn't stick together....that gave me pause. Printed again at 270...voila. Strong, great adhesion, minimal stringing, supports popped right off when printed with a z-distance of double the layer height. I also printed a part in Polymaker's PC-Max as that gets raves as well. It had some warp. Not nearly what NylonX had but some. Compared to CoPa...I don't see any reason to use the PC-Max other than cost...for this application I'll stick with the extra 60C Vicat softening temperature of CoPA....with ZERO WARP!! If the cost doesn't scare you off, and you need strong nylon parts that can take heat but also print without warp....you just found your filament. All metal hotend please....you have to heat this stuff up or print really slow. I have an E3D V6 on a CR-10 V2 and it couldn't have gone better. ... show more
Reviewed in the United States on June 4, 2020 by Tonia Tonia
    • In one word: BEAUTIFUL! Worth every penny!!!
Color: 1.75mm 0.5kg Pa12-cf, Black
This filament is very pricey; I figure it's around 5X+ the price of most filaments! But, as the old saying goes, "you get what you pay for!", which definitely applies in this case. In the past 4 years, I've printed THOUSANDS of items, most personally-designed, and I've used over a HUNDRED spools of filament such as PC, PLA, TPU, ABS, Nylon, Carbon fiber PC and PETG, etc. Lots of brands, lots of types. I'm a 74 year old retired Engineer, and LOVE to design and print 3D stuff. And, I'm NOT talking about 'trinkets, models and masks' either!!! I'm talking real tools and hardware,....real-world, "it's gotta be TOUGH" stuff! I've recently had to design and built the TOUGHEST thing I've ever printed, a one-to-two blades adapter for my edger. After at least a 10 versions, I finally came up with an 'elegant' design, but the plain Nylon I was using wasn't cutting it. Just too much warpage and dimensional instability. So, after reading the review by Tonia, I decided to give this filament a try. OK, I'll cut to the chase....If you need something TOUGH, something that does not warp, something that prints BEAUTIFULLY, and looks BEAUTIFUL, look no further. Hands down the best filament I've ever, ever used. And, I'm talking about ALL filaments I've used! VERY Pricey. BUT, "You get what you pay for"! And, for all you Polymaker folks who were part of developing this filament: GOOD JOB, VERY WELL DONE!!!! Starting first layer temp at 260 C. Bed at 50. Then up to 280 C for layers 2+, same bed temp. NO FAN, EVER!!! Enclosed. PRUSA MK3S+, Textured Utilistik bed. Elmer's Purple on bed. Perfect prints. If your print has to be absolutely perfect and strong, this is the filament! Worth every penny. ... show more
Reviewed in the United States on May 19, 2024 by Spock
    • Excellent results, no warping, easy to print
Color: 1.75mm 0.5kg Pa12-cf, Black
I've been searching for a good temperature resistant filament that I can print without warping. This PA12-CF is the first complete success. I'm using the Bambu X1C printer. When I try to print medium-large parts with ASA, they warp a bit, even when I let the chamber preheat as much as possible. But with this filament, there is zero warping. The prints look very good with a slightly rough satin finish. I follow Polymaker's instructions and used the engineering plate with Nano Polymer Adhesive. Without adhesive, I did have a print come loose, but with the adhesive, the print stayed put perfectly and was easy to remove. I started with a bit of fan (20-30%) but got better results (less dull finish, better layer adhesion) with zero fan. Also, the print was dimensionally perfect. With the ASA parts, I had to scale them up by 0.6%, but these came out the correct size without any adjustment. ... show more
Reviewed in the United States on January 10, 2024 by N. Crutcher

Can't find a product?

Find it on Amazon first, then paste the link below.