Search  for anything...

NovelLife Mini Hobby Table Saw Handmade Woodworking Bench Saw DIY Model Crafts Cutting Tool with Adjustable Power Supply 63mm HSS Circular Saw Blade (R2)

  • Based on 322 reviews
Condition: New
Checking for product changes
$89.99 Why this price?
Save $9.01 was $99.00

Buy Now, Pay Later


As low as $15.00 / mo
  • – 6-month term
  • – No impact on credit
  • – Instant approval decision
  • – Secure and straightforward checkout

Ready to go? Add this product to your cart and select a plan during checkout. Payment plans are offered through our trusted finance partners Klarna, PayTomorrow, Affirm, Afterpay, Apple Pay, and PayPal. No-credit-needed leasing options through Acima may also be available at checkout.

Learn more about financing & leasing here.

Free shipping on this product

30-day refund/replacement

To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.

To initiate a return, please visit our Returns Center.

View our full returns policy here.


Availability: In Stock.
Fulfilled by Amazon

Arrives Friday, Apr 25
Order within 16 hours and 47 seconds
Available payment plans shown during checkout

Features

  • Unibody Steel Frame: Solid steel unibody frame with 5mm thick alumimum alloy platform durable no deformation ensure the flatness and clean cutting performance,protective plate over the saw blade safe to use
  • 775 Motor Driving: 775 type ball bearing motor provide ultra strong cutting power but low noise, four rubber damping pad, anti-slip and shock-absorbing when working
  • Blade Height Adjustment and Various Material Cutting Capacity: Euquipped with blade height adjustment structure with 0-14mm range and equipped with 2.5" HSS circular saw blade,2.5" resin blade, 2.4" diamond saw blade and 2.5" alloy saw blade for PCB board,plastic, PVC, wood,balsa,acrylic material cutting to meet your DIY crafts demands
  • Precision Cutting: Equipped with 24V 4A adjustable power supply and miter gauge on the desktop with laser scaled plate, pecisely cutting will be easier
  • Compact Size: 7.1X5.5X3.1inch(L*W*H) compact size enable you to place it at anywhere and save your worktable space

Description

Note: this is a 7.1X5.5X3.1inch(LWH) super mini size table saw for small items cutting, please read the size This miniature table saw is designed for thin wood,balsa,bamboo, plastic, acryic plate material cutting to do DIY model hobbies. Solid thich steel frame equipped with 775 type dual ball bearing high torque motor providing strong cutting power but low noise. The cutting table has the miter gauge and laser scaled plate meeting your accure cutting needs. It is equipped with blade height adjustment structure supporting 0-14mm adjustment range and 2.5 HSS circular saw blade, 2.4" diamond saw blade,2.5" resin blade and 2.5" alloy steel saw blade for PCB board,plastic, PVC, wood,balsa,acrylic material cutting perfect for wooden airplane, boat,dollhouse projects. Compact size will save your worktable space Specifications: Power:96W Working Voltage: DC 24V 4A Motor:775 type Load-free Speed:5000RPM Blade Height Adjustment Range:0-14mm Bore:16mm/0.63inch Saw Size:18X14X8cm/7.1X5.5X3.1inch(LWH) Net Weight:1.9kg Package Included: 1X R2 Mini Table Saw 1X 2.5" HSS Circular Saw Blade 1X 2.4" Diamond Saw Blade 1X 2.5" Alloy Steel Saw Blade 1X 2.5" Resin Blade 1X DC 24V 4A Adjustable Voltage US Power Supply Note: 1. the saw blade over the desktop height is 14mm and support blade height adjustment with 0-14mm range. 2. there are three type blade for certain material cutting, please install the right blade when using otherwise will affect the cutting performance. If you received product has any problem please feel free to contact us and we will answer you in 10 hours to help you solve it

Brand: NovelLife


Color: R2


Blade Material: High Speed Steel


Surface Recommendation: Wood, Plastic, Acrylic


Power Source: Corded Electric


Brand: ‎NovelLife


Color: ‎R2


Blade Material: ‎High Speed Steel


Surface Recommendation: ‎Wood, Plastic, Acrylic


Power Source: ‎Corded Electric


Special Feature: ‎Adjustable Power Supply, Depth Adjustment


Included Components: ‎R2 Mini Table Saw, 2.5" HSS Saw Blade,2.5" Resin Blade, 2.4" Diamond Saw Blade, 2.5" Alloy Steel Saw Blade, Adjustable US Power Supply


Product Dimensions: ‎7.1"L x 5.5"W x 3.1"H


Voltage: ‎24 Volts


Warranty Type: ‎Limited


Item Weight: ‎1.9 Kilograms


Speed: ‎5000 RPM


Blade Length: ‎2.4 Inches


Number of Teeth: ‎56


Current Rating: ‎4 Amps


Wattage: ‎96 watts


Blade Shape: ‎Round


UPC: ‎795890017657


Manufacturer: ‎NovelLife


Item Weight: ‎4.18 pounds


Material: ‎Alloy Steel


Special Features: ‎Adjustable Power Supply, Depth Adjustment


Batteries Included?: ‎No


Batteries Required?: ‎No


Date First Available: June 6, 2018


Frequently asked questions

If you place your order now, the estimated arrival date for this product is: Friday, Apr 25

Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

  • Klarna Financing
  • Affirm Pay in 4
  • Affirm Financing
  • Afterpay Financing
  • PayTomorrow Financing
  • Financing through Apple Pay
Leasing options through Acima may also be available during checkout.

Learn more about financing & leasing here.

Top Amazon Reviews


  • 4 stars as a table saw, 5 as a budget table saw. Great buy for the price!
This is a nice little hobby saw. I love the size. I can store it easily, even in my tiny workshop. When it comes time to put it into service, setup is quick and simple, especially if the correct blade is already installed. All three pictured blades were included. I immediately installed the 60t blade and gave it a try. Installation was easy, though the process does have room for improvement. To get to the blade arbor, one must remove the entire table from the base (it's four screws in the corners). There's a drive belt that needs to be dealt with when the table is reattached to the base. All the necessary wrenches were included. There are two key features I wish this saw had: 1) blade height adjustment, and 2) arbor tilt. The blade height is fixed at a fairly tall height for such a small blade. It's square to the table, near as I can tell. I guess it would be nice if there was a miter slot on both sides of the blade instead of only on the left, but that's less critical to full table saw function. Removable/replaceable throat plates would be nice, too. Back to blade height, the 80mm blade is exposed just enough to cut through 3/4" boards. Not only did it cut the pine successfully, it was a very, very smooth cut. I was able to cut strips a bit thinner than 2mm, which I then cut into strips that were 4mm wide. Nice, consistent cuts. The amount of exposed blade makes ripping thinner material a little less fun; the out feed starts to flap around crazily once the blade starts grabbing at it. I had to hold it down on the table with my free hand. Adjustable blade height would mitigate that problem. The rip fence is quick and easy to install and adjust. The measurements marked on the table were about 1mm off from accurate, but they matched each other. As long as I was careful lining up both sides of the fence on the scale, I got square cuts. Of course, it's always a good idea to check it with a square to be sure. The miter gauge was an easy assembly and seems to be pretty accurate. It slides freely through the lone miter slot, and it passes maybe 10mm from the blade, so even fairly short stuff can be crosscut without too much difficulty or excessive danger. It's not very loud as power saws go. I don't think I would try to use it if someone was trying to sleep or something, but it's fairly quiet. Most of the sawdust stays in the dust box under the table. No way built in to hook up vacuum, but it's pretty easy to shake the sawdust out into the garbage. Hardly any accumulated outside the dust box. A quick pass with a dustbuster and it was all cleaned up. For the money, this one is tough to beat. It's missing a couple features, but it sure does what it says on the box. A hobby saw that does everything this one does, as well as offering the adjustable blade height, tilt arbor, and so forth is about 4 times the cost (more than a lot of full-size, full-featured table saws). Overall, I'm pretty happy with this purchase. Bottom line: this is a great value for the money. It's well built. I expect it to last a long time.I would recommend this saw to any casual hobbyist, and maybe even the more dedicated ones. I would not recommend this saw to anyone who needs a tilt arbor and/or blade height adjustment. One more thing to consider is tat this saw has an unusual arbor size at 16mm, so there aren't that many blades out there to choose from. In fact, I haven't been able to find any aside from those that were included with the saw. ... show more
Reviewed in the United States on March 20, 2019 by Dr. Cranknstein

  • Cool little machine
Color: R2
The first thing I did when I got this was cut a bunch of weird stuff. I have to say for what this is, I like it. I read the reviews that mention that it bogs down. Any saw will bog down if you twist what you're cutting. If you hold your piece steady, cut straight, and go slow, it cuts just fine. I cut 1/2" plywood pieces just fine. I cut thick oak bark, cutting first on one side, then flipping it and following the line to cut the other side. I cut grooves and angles and little rounded (ish) ends. The cuts are smooth without jagged edges. I like that you can cut from either side of the blade. I like that you can hold a piece and just kind of manipulate it into the saw blade. There's no instructions, and there's at least one part that I don't know what to do with. There's also a hose thing that I think is supposed to attached to the hole in the back where the sawdust comes out, but there's no way it fits. The hole in the back is worrying. It's supposed to let the sawdust escape, but the blade is RIGHT THERE, and if you're grabbing or holding the machine (because it's so small and it moves), your finger can slip right in there. You have to be VERY MINDFUL when using this. Also it's so small, it feels like a toy. The urge to just reach over and grab that errant scrap or piece that's caught or whatever is SO strong. This is a real spinning saw blade that will slice fingers immediately if they get near. You have to always keep in mind to use a push bar to move your scraps. There's an easy flip button to turn it off if you need to use your hands for anything. All in all I'm glad I bought this, and I think I will get a lot of use out of it. It's so much easier for small projects than hand sawing, or trying to use the big saw for little pieces. I do wish it came with a case. Right now I'm keeping it and all its blades, tools, and parts in the box it came in, and that's okay but not what I would prefer. ... show more
Reviewed in the United States on October 25, 2024 by Chris Davis

  • Fantastic little saw!
I really love this little saw, and would give it 5 stars if a couple of ergonomic issues would be fixed. But those aside, I get really nice cuts on this saw, and have used it for precision cutting of PCBs and polycarbonate and other plastics. I really love how well it cuts polycarb and easily cuts 1/2" thick material if I feed it at the right speed, which doesn't take long to figure out. I think the speed of the blade is perfect for a diamond abrasive wheel cutting PCB, but I'd prefer a slower rate when cutting plastics or aluminum (which is also does a splendid job of cutting with the carbide blade). Every now and then the speed of this is high enough to cause an overall vibration in the system that degrades a cut, so a bit of care needs to be taken. For me, this has never been real bad, it's just been sort of a nuisance. The markers on the edge for setting the guide to cut material width are surprisingly accurately placed! I seriously can't believe how close to the dimension I can consistently hit with this saw. I check after cutting with a dial caliper, and I'm happy after every cut. The square included is a bit cheap, but it functions well on the table. For the price, it's a great little saw for working small parts. ... show more
Reviewed in the United States on February 10, 2020 by R. S. Winsor

  • Great little saw for hobbiests
Color: R2
This is a great little saw for cutting wood, soft metal and plastic. The vacuum system works to keep the dust down. The table is flat and true and the guide bar works well for repeat cuts.
Reviewed in the United States on January 23, 2025 by Nice person in CT

  • Not worth the price!
My hubby bought this mini table saw for my dollhouse miniature hobby. As a lifelong woodworker, he was excited for me to use it. First off, he thought that the blade guard was actually in the wrong place. He then proceeded to show me how to use a table saw properly - and he picked a thin piece of wood to create a little push stick. First pass went fine. Second pass the motor seemed to bog down. Third pass the motor shorted out. SERIOUSLY??? 3 passes into my new saw and it's toast!! What a piece of junk!! ... show more
Reviewed in the United States on September 18, 2024 by Jackie Nelson

Can't find a product?

Find it on Amazon first, then paste the link below.