Search  for anything...
SUNLU

SUNLU Shiny Silk PLA Filament 1.75mm, Neatly Wound Glossy PLA 3D Printer Filament 1.75mm ±0.02mm, Fit Most FDM 3D Printers, Good Vacuum Packaging, 1kg Spool (2.2lbs), Silky Glossy PLA Black

    • Based on 6,136 reviews
Condition: New
Checking for product changes
$26.99 Why this price?

Buy Now, Pay Later

As low as $6 / mo
  • – 4-month term
  • – No impact on credit
  • – Instant approval decision
  • – Secure and straightforward checkout

Ready to go? Add this product to your cart and select a plan during checkout. Payment plans are offered through our trusted finance partners Klarna, PayTomorrow, Affirm, Afterpay, Apple Pay, and PayPal. No-credit-needed leasing options through Acima may also be available at checkout.

Learn more about financing & leasing here.

Selected Option

Free shipping on this product

30-day refund/replacement

To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

Availability: In Stock.
Fulfilled by Amazon
Arrives Saturday, Nov 23
Order within 6 hours and 31 minutes
Available payment plans shown during checkout

Color: 1000g Pla Silk Black


Features

  • 1 Super Neat Filament SpoolSUNLU 3D printer filament product line is equipped with an excellent self-developed neat winding device, 100% neat rate, no clogs, making filament easier to use.
  • 2SUNLU Shiny Silk PLASUNLU 3D printing silk PLA filament 1.75mm has good layer adhesion, very easy to use, friendly to beginners, no clog, no bubble, no tangle.
  • 3Shiny Silky Surface PLASilk filament has a very shiny smooth surface, the reflective effect is good, and the color is bright, which is very suitable for 3D printing art.
  • 41.75mm Filament DiameterDimensional Accuracy +/- 0.02mm. SUNLU filament has wide compatibility due to the small diameter error, making it suitable for almost all 1.75mm FDM 3D printers.
  • 5Recommend SettingsWe recommend printing the Silk PLA filament at nozzle temperature of 200-230C, bed temperature of 60-80C, and printing speed of 30-60mm/s.
  • 6SUNLU Main ProductsFDM 3D Printer, 3D Printer Accessories, 3D Printer Filament, Filament Dryer, 3D Pen, 3D Printer Resin, LCD 3D Printer, Resin Curing Box.

Brand: SUNLU


Material: 3D Printer Filament, Shiny Silk PLA Filament 1.75mm


Color: 1000g Pla Silk Black


Item Diameter: 1.75 Micron


UPC:


UPC: 789964090936


Manufacturer: SUNLUGW


Brand Name: SUNLU


Item Diameter: 1.75 Micron


Color: 1000g Pla Silk Black


Material Type: 3D Printer Filament, Shiny Silk PLA Filament 1.75mm


Frequently asked questions

If you place your order now, the estimated arrival date for this product is: Saturday, Nov 23

Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

  • Klarna Financing
  • Affirm Pay in 4
  • Affirm Financing
  • Afterpay Financing
  • PayTomorrow Financing
  • Financing through Apple Pay
Leasing options through Acima may also be available during checkout.

Learn more about financing & leasing here.

Similar Products

Top Amazon Reviews

    • REALLY GOOD PLA
Color: 1000g Pla Silk Black
'A Good and Superb PLA!' Frankly Id heard many fine things and some favorable comment on SUNLU Filaments! So having bought a roll an done a project I can Honestly Report that most of the favorable things reported are in truth correct as it is a 'Very Fine' Plastic and SUNLU definitely has its act together!!!. PROS: Makes a Neat an Classy looking Part! Easy to Run, Easy to Set Up! Its the Real Deal You Get A Full Roll of !st Class Filament! Almost the Only Silk PLA Plus+ on the Market!!!!! A Real Bargain as the Price is Fantastic for what you get!. Fast Amazon Shipping cannot be Beat!!!!! CONS: None actually cept If Id known this was a PLA+ Id have ordered it sooner!!!!! In General: Now In My Useage The SUNLU worked and printed quite well. Setup was simple, I use Sticky Blue painters tape. Set Nozzle at 259 and Bed 109 and let warmup for 10-15 mins. I set 1st Layer at Nozzle 257 Bed 100, Speed at 35 or 40! Then after 1st layer is down and hard I set the rest of the run at about say: Nozzle 250- or 255 Bed 60 0r 75 and let Speed run at 45... True "I Know" at those settings Ill get some stringing but 'I dont have any problems with layers not bonding and It don't take 'All Day' to get the part finished either. Yes I know there are all kinds of 'Micro-settings, But I know that most machines have there own 'Pet Settings for wanting to run right. Now most folks want to run 'Cold and Fast' But I tried that and got a LOT of junk parts!. For me I found that "Slow but Hot" seems to get 'Better Parts'..... Me I adjust my speed with a New Plastic until Stringing starts to appear then I back off fast!. I also run my tests a 'Bit Differently' as many will run a ducky or a benchly and its a good way. For Myself I have a small but 'difficult part', See it dont take much Plastic but if the plastic is good enough to make a 'Difficult Part' then the easy stuff will run Home Free as the SUNLU did!!!!!!!!!! Now One Major Complaint w Sunlu is it doesnt extrude well or the teeth dont grip the Plastic right!. Yes at one time 'I Had' that issue but here is how I worked around it!. A HOT TIP: Now sooner or later when the teeth wear down you will have to replace that drive extruder gear!. On most new machines its the round Brass One w the two small allen nuts sticking out the top side! Most guys re install the gear wrong, I know I did?????? Yes I did as most of us will do what the YouTube guys did as they 'Set It' Plumb in the middle!. Hey if you are satisfied and it works for you go for it!!!!!!!!!! But there's a Better Way, In stead of in the Middle I just slid the Gear down a notch and let the plastic run off the teeth on the Top Side of the Gear as it grips better and runs smoother too. Oh yes it will surely wear like they all do in time, But if you did it right there is no great need to replace the gear not by any means sic!!!... Just loosen the allens then "CAREFULLY" slide the gear back upwards until the Teeth on the bottom which are still good are NOW gripping the plastic as I think its pretty neat to reuse and get good service from the same part twice!!!!!. TO: Close; SUNLU Silk PLA is super good stuff that is easy to set up, It runs fine and makes a good part!. And to Finish Its the only PLA+ that runs a silk fibre so it has Very Considerable strength and I definitely Intend to try some Printer Gears with this and the smooth finish makes a classy looking part too!. Kudos to the Seller! Kudos to Amazon! Nuff Said... IndianaED ... show more
Reviewed in the United States on November 24, 2022 by Clarence E. Royce
    • Glowing review!
Color: Pla Glow in the Dark - Green to Glow Green
Review Image by Avatar Farms Avatar Farms
This PLA is awesome. The prints come out smooth. The quality is great. The glow? WOW! This thing glows (with blacklight charging) like a champion firefly on a hot summer night. I held it under a blacklight for about 10 seconds and was able to capture the image shown in this review. The blacklight and every other light was off. You can actually see my arm illuminated by this bad boy. I was going to give it 4 stars because it does tend to seep a little on the hot extruder and leaves a little bit of stringing, but I am just having too much fun printing awesome glowing Halloween stuff to not give it the glowing review it deserves. ... show more
Reviewed in the United States on October 2, 2024 by Avatar Farms Avatar Farms
    • It's really bright
Color: Pla Glow in the Dark - Green to Glow Green
Review Image by Krzysztof Czarnecki Krzysztof Czarnecki
It glows really bright and long compared ro other glow in the dark filaments I have used before. The slightly grainy texture hides layer lines a bit. But it feels a bit rubbery and expands a bit after leaving the nozzle (like some so-called silk filaments which I don't like because of these properties), so it's not very good for fine details. And it does get much more stringing than ordinary PLA, especially if left unsealed in moderate (>45%) humidity for a week. But if you need to print a life-size Halloween mask or a box you can find easily in the dark ess then this is the right filament for you. And buy a new nozzle, and keep the old one just for using with filaments like this one, because it's abrasive. Or get a ruby or stainless steel nozzle if you don't mind playing with temperature, PID and retraction settings again. I can already see my nozzle developing a bigger hole and I have printed like 300g of this filament. ... show more
Reviewed in the United States on September 9, 2024 by Krzysztof Czarnecki Krzysztof Czarnecki
    • "Real Wood Fiber Wood PLA" - Easy to print, smooth texture for being 20% wood
Color: Real Wood Fiber Pla
I use the same settings for MH Build PLA and many other kinds of colored PLA with success, so I didn't have to fiddle with calibration. I like the light pine color, and it resembles the pictures well, but I wish there was more of a wood texture. ISANMATE and AMOLEN PLA have more texture and can be cheaper on the right days, but they're more stringy and require more time to get printing properly. If you're looking for deals: keep an eye out. This can drop down to $15/kg, but ISANMATE has dropped to $12/kg. ... show more
Reviewed in the United States on July 23, 2024 by M M
    • Great Filament!
Color: 1kg Pla Silk Light Gold
Great results with this stuff. Never had a bad experience with Sunlu filament. Prints great and no clogs
Reviewed in the United States on October 8, 2024 by Ryan B.

Can't find a product?

Find it on Amazon first, then paste the link below.