Search  for anything...
Sovol

Sovol Filament Dryer 2024, SH01 Filament Dehydrator 3D Printer Spool Holder with Upgraded Fan, Dry Box for Keeping Filament Dry, Compatible with 1.75mm, 2.85mm Filament & PLA PETG TPU ABS

    • Based on 2,199 reviews
Condition: New
Checking for product changes
$52.99 Why this price?
Save $16.99 was $69.98

Buy Now, Pay Later

As low as $8.83 / mo
  • – 6-month term
  • – No impact on credit
  • – Instant approval decision
  • – Secure and straightforward checkout

Ready to go? Add this product to your cart and select a plan during checkout. Payment plans are offered through our trusted finance partners Klarna, PayTomorrow, Affirm, Afterpay, Apple Pay, and PayPal. No-credit-needed leasing options through Acima may also be available at checkout.

Learn more about financing & leasing here.

Selected Option

Free shipping on this product

30-day refund/replacement

To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

Availability: In Stock.
Fulfilled by Amazon
Arrives Thursday, Nov 7
Order within 10 hours and 19 minutes
Available payment plans shown during checkout

Color: White


Size: 2 KG


Features

  • Remove Excess Moisture3D printer filaments are hygroscopic, moisture would cause printing failure. Sovol SH01, a great addition to 3d printer, can remove excess moisture, keep your filament dry and bring you better prints. The surface of prints will be smoother, the layer adhesion increased. No more brittle PLA, PETG, ABS filament.
  • Real-time Monitoring of Temp and Humidity insideDisplays the humidity and temperature in the dry box in real time. Setting temperature 40 , 45 , 50 C and setting time from 6 hours to 12 hours. If you use SH01 in a room with room temperature under 16C, the temperature in the dryer box would not come up to 50C. But do not worry, this would not decrease drying effect.
  • Excellent Power-off Drying ModeSilicone & PTFE seal makes it possible to store filaments for a long time without power and protects your filaments from moisture and dirt. You can put 4 bags of desiccants (not included in the package) inside the dryer box to improve drying efficience & quality.
  • Large Capacity Sovol dryer box can store 2 filament rolls with a width of less than 70 mm or 1 filament roll with a width of less than 150 mm. Please open the PTFE seals on the top of the box during heating for Moisture evaporation.
  • Heating More Evenly The unique design of the built-in fan in the box is based on the principle of modynamics of air, makes the filament heated more evenly. SH01 makes drying more efficient. Any questions about the product please feel free to let us know. Our technical support team will provide service as soon as we can.

Brand: Sovol


Material: Polyethylene Terephthalate Glycol, Polytetrafluoroethylene, Polylactic Acid, Thermoplastic Polyurethane See more


Color: White


Item Weight: 1.66 Kilograms


Item Diameter: 2.85 Millimeters


Manufacturer: ‎Sovol


Brand: ‎Sovol


Item Weight: ‎3.65 pounds


Product Dimensions: ‎9.69 x 6.89 x 9.53 inches


Item model number: ‎SV-SH01-1


Color: ‎White


Material Type: ‎Polyethylene Terephthalate Glycol, Polytetrafluoroethylene, Polylactic Acid, Thermoplastic Polyurethane


Number of Items: ‎1


Size: ‎2 KG


Manufacturer Part Number: ‎‎SV-SH01-1


Date First Available: May 31, 2021


Frequently asked questions

If you place your order now, the estimated arrival date for this product is: Thursday, Nov 7

Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

  • Klarna Financing
  • Affirm Pay in 4
  • Affirm Financing
  • Afterpay Financing
  • PayTomorrow Financing
  • Financing through Apple Pay
Leasing options through Acima may also be available during checkout.

Learn more about financing & leasing here.

Similar Products

Top Amazon Reviews

    • Huge improvement over the SH01 filament dryer
Color: Metal Gray Size: 2 KG
Review Image by Phil C Phil C
Review Image by Phil C Phil C
Review Image by Phil C Phil C
The media could not be loaded. Good : Temperature up to 70°C Timer up to 98 hours Modern control panel Integral power supply (not a separate box) Bad : Noisy at first, but not after temperature has stabilized Costs more So I have the original SH01 filament dryer also so I can directly compare the old and the new together. Power : SH01 48W with separate multi-voltage power supply 12V 4A 2.1mm barrel jack SH02 150W built-in power supply. The heater and fan are both more powerful so this makes sense having larger power consumption. SH02 has one built into the unit so there is only the power cable (figure of 8) required Noise : SH01 fan did start to rattle and become noisy after a while. It would be a cheap fan in there unfortunately. SH02's fan with the cover off is very noisy. However the lid when closed (as it should be) reduces this a lot. Whilst it is still increasing to target temperature it still is noisy. But after target reached and just maintaining temperature is relatively quiet. I could probably sleep through this. And would be quieter than a 3D printer itself. But time will tell whether the fan is of higher build quality for a longer life or not Controls : SH01 only has 3 buttons which were not that intuitive. SH02's controls are somewhat flashy in comparison being touchscreen. Tapping the power button does nothing, you have to hold it down to power up & down showing an animation of display appearing (see video). Temperature : SH01 has 40/45/50°C only. SH02 has 40/45/50/55/60/65/70°C choices. You can use the presets can be chosen between PLA, TPU, PETG, ABS, ASA, PVA, PC, PA, PP which will choose recommended heat/timer settings too. Timer : SH01 can be set from 6-12 hours in 1 hour increments SH02 you can manually set the temperature between 40°C and 70°C and the timer between 2 hours and 98 hours. I guess for those moments when you really want to be sure the moisture is gone! Other SH02 features not on SH01 There are two desiccant holders at the bottom which measure 70mm x 50mm x 10mm. The ones in the photo show the color-changing silica gel I have fit nicely. Also there is a hole at the top of the lid labeled "OPEN THIS TO LET VAPOR OUT" Other observations I placed a thermometer/hygrometer on top of my filament whilst drying. There was a 1%-2% humidity difference between dryer display temp and my own sensor. Temperature differed by about 2°C less whilst at target temp. Despite the label at the bottom that reads "CAUTION: VOLTAGE 110V HOT ROTATING SHAFT" this is a multi-voltage device that will work on 110V or 220V in those countries. The angle of the filament holes are slightly different. It shouldn't make much of a different for placement for those that print directly from the filament dryer. Conclusion Yes it costs more, but also so much more capable filament dryer. Worth the price to me. ... show more
Reviewed in the United States on July 15, 2024 by Phil C Phil C
    • Really satisfied with this dryer
Color: Metal Gray Size: 2 KG
Review Image by J J
Review Image by J J
Review Image by J J
Review Image by J J
Review Image by J J
Review Image by J J
I recently purchased this filament dryer. The package arrived well-packaged. The dryer comes with operating instructions, though it is quite intuitive and easy to operate without needing to refer to them much. It features preset drying times and temperatures for the common filaments used in 3D printing. One of the standout features of this dryer is its quiet operation. It works efficiently and effectively, keeping noise to a minimum. Additionally, it allows for longer drying durations compared to other models. While many dryers have a maximum drying time of 14-16 hours, this model lets you set the drying time for up to 98 hours. Overall, I am very satisfied with this filament dryer and would highly recommend it to anyone in need of a reliable filament drying solution. ... show more
Reviewed in the United States on July 18, 2024 by J J
    • Exactly as described
Color: White Size: 2 KG
Review Image by Ntjp Ntjp
Review Image by Ntjp Ntjp
Review Image by Ntjp Ntjp
Review Image by Ntjp Ntjp
Review Image by Ntjp Ntjp
Bought the SH01 Filament Dehydrator for testing. When testing I looked at the function of the dehydrator compared to the advertisement listed on Amazon. Based on this I would give it a 5 star. It is exactly as described and functions well. I was able to get 15% humidity at 50c when leaving the latches unsecured. The directions are easy to understand and even advise to leave the lid propped open to allow moisture to escape. Positives – 1) Includes fan to circulate air inside the case. 2) Can be used as a storage box when closing off holes using attached plugs. 3) Easy to program. 4) Good quality build. 5) Easy to understand directions. 6) Large dryer, can dry two rolls at one time saving cost of two dryers. I gave it a 4 star based on the following factors. 1) Temperature is 40, 45, or 50. However, this may be a good feature for many. It was not a factor for me as I run my other dehydrators at 50c. 2) Timer can be set from 6 to 12 hours. Would like to see at least 24 hours. 3) The holes for feeding filament are on top. Would be good to have holes in the front also. It will not work as well if you mount the dryer above your printer as it will lead to filament binding in the holes. This will be an easy fix by drilling two holes in the front and inserting Pneumatic Fittings. However, this will take away from using as a storage box and may void warranty. 4) The bottom gets hot while using. Found some feet on Thingiverse you can print to raise it which will help with this issue. Sovol 3D - DUAL Filmanet Dry Box Stand Off 5) Takes a while for the temperature to raise to set value. This may be due to it being larger and holding 2 rolls of filament. Overall – This is a quality dryer and will make an excellent standalone dryer for filament. When placed beside the printer it will also work to keep filament dry when running long prints. Would highly recommend to use with a dual head printer. ... show more
Reviewed in the United States on August 17, 2022 by Ntjp Ntjp
    • Good filament if you adjust your print settings
Color: Bronze Purple Green Size: 1 KG
I had no issues printing this filament after adjusting my settings. It printed nicely, is very shiny, has little stringing, and has a very interesting color change. Ultimately it's well worth the price and is a quality product. I am however noticing multiple negative reviews on this product referencing the filament snapping in the extruder. What is really happening (and what happened to me) is that people are not lowering retraction distance or speed. This results in a clogged hot end and the extruder eats through the filament while trying to push it through the clog. I'm pretty sure this is an issue with most silk filaments. If you lower retraction, you should have no issues. I use .5mm at 20mm/s but I have an all-metal hotend and direct drive. If you have a Bowden extruder it should be different. I also am not certain how high speed you can go but I printed at 60mm/s as recommended. ... show more
Reviewed in the United States on December 12, 2023 by Cindy A.

Can't find a product?

Find it on Amazon first, then paste the link below.