Search  for anything...
SUNLU

SUNLU Glow in The Dark PLA Filament, Neatly Wound Luminous PLA 3D Printer Filament 1.75mm Dimensional Accuracy +/- 0.02mm, Fit Most FDM 3D Printers, 1kg Spool (2.2lbs), (Red PLA, Glow Red)

    • Based on 6,094 reviews
Condition: New
Checking for product changes
$23.99 Why this price?

Buy Now, Pay Later

As low as $5 / mo
  • – 4-month term
  • – No impact on credit
  • – Instant approval decision
  • – Secure and straightforward checkout

Ready to go? Add this product to your cart and select a plan during checkout. Payment plans are offered through our trusted finance partners Klarna, PayTomorrow, Affirm, Afterpay, Apple Pay, and PayPal. No-credit-needed leasing options through Acima may also be available at checkout.

Learn more about financing & leasing here.

Selected Option

Free shipping on this product

30-day refund/replacement

To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

Availability: In Stock.
Fulfilled by Amazon
Arrives Friday, Feb 7
Order within 3 hours and 1 minute
Available payment plans shown during checkout

Color: Glow in the Dark - Red to Glow Red


Features

  • 1Glow in the Dark PLASUNLU glow in the dark PLA filament contains phosphorescent materials, which can glow in the dark after absorbing light energy. If it is exposed to UV lights, the luminous effect will be better.
  • 21.75mm Filament DiameterDimensional Accuracy +/- 0.02mm. SUNLU filament has wide compatibility due to the small diameter error, it's suitable for almost all 1.75mm FDM 3D printers.
  • 3SUNLU Spool DiameterSpool Diameter: 8.00", Spool Width: 2.50", Spool Hub Hole Diameter: 2.20". The size of the SUNLU filament spool is suitable for hanging on a lot of FDM 3D printers.
  • 4Recommend SettingsWe recommend printing at a nozzle temperature of 200-210C, bed temperature of 50-65C, printing speed of 50-100mm/s.
  • 5Neatly Wound 3D Filament SpoolSUNLU's self-developed neat winding device ensures that the filament is easy to use, with a 100% neat rate that reduces the risk of tangles and jams, and provides a smoother and more efficient 3D printing experience.
  • 6SUNLU Main 3D ProductsSUNLU offers a wide range of high-quality 3D printing products, including 3D printer filament, filament dryer, FDM 3D printer, 3D pen, 3D pen filament, 3D printer resin, LCD 3D printer, resin curing box, and other accessories, providing you with everything you need for a successful 3D printing experience.

Brand: SUNLU


Material: Glow in the Dark PLA


Color: Glow in the Dark - Red to Glow Red


Item Weight: 1 Kilograms


Item Diameter: 1.75 Millimeters


Manufacturer: ‎SUNLUGW


Brand: ‎SUNLU


Item Weight: ‎2.2 pounds


Package Dimensions: ‎8.07 x 8.03 x 2.48 inches


Item model number: ‎Glow in the Dark PLA Filament 1.75mm


Color: ‎Glow in the Dark - Red to Glow Red


Material Type: ‎Glow in the Dark PLA


Number of Items: ‎1


Size: ‎1KG


Manufacturer Part Number: ‎SLDE-PLANOC-NTRD-1KG-GMSLUS


Date First Available: August 15, 2023


Frequently asked questions

If you place your order now, the estimated arrival date for this product is: Friday, Feb 7

Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

  • Klarna Financing
  • Affirm Pay in 4
  • Affirm Financing
  • Afterpay Financing
  • PayTomorrow Financing
  • Financing through Apple Pay
Leasing options through Acima may also be available during checkout.

Learn more about financing & leasing here.

Similar Products

Top Amazon Reviews

    • REALLY GOOD PLA
Color: 1kg Silk Black
'A Good and Superb PLA!' Frankly Id heard many fine things and some favorable comment on SUNLU Filaments! So having bought a roll an done a project I can Honestly Report that most of the favorable things reported are in truth correct as it is a 'Very Fine' Plastic and SUNLU definitely has its act together!!!. PROS: Makes a Neat an Classy looking Part! Easy to Run, Easy to Set Up! Its the Real Deal You Get A Full Roll of !st Class Filament! Almost the Only Silk PLA Plus+ on the Market!!!!! A Real Bargain as the Price is Fantastic for what you get!. Fast Amazon Shipping cannot be Beat!!!!! CONS: None actually cept If Id known this was a PLA+ Id have ordered it sooner!!!!! In General: Now In My Useage The SUNLU worked and printed quite well. Setup was simple, I use Sticky Blue painters tape. Set Nozzle at 259 and Bed 109 and let warmup for 10-15 mins. I set 1st Layer at Nozzle 257 Bed 100, Speed at 35 or 40! Then after 1st layer is down and hard I set the rest of the run at about say: Nozzle 250- or 255 Bed 60 0r 75 and let Speed run at 45... True "I Know" at those settings Ill get some stringing but 'I dont have any problems with layers not bonding and It don't take 'All Day' to get the part finished either. Yes I know there are all kinds of 'Micro-settings, But I know that most machines have there own 'Pet Settings for wanting to run right. Now most folks want to run 'Cold and Fast' But I tried that and got a LOT of junk parts!. For me I found that "Slow but Hot" seems to get 'Better Parts'..... Me I adjust my speed with a New Plastic until Stringing starts to appear then I back off fast!. I also run my tests a 'Bit Differently' as many will run a ducky or a benchly and its a good way. For Myself I have a small but 'difficult part', See it dont take much Plastic but if the plastic is good enough to make a 'Difficult Part' then the easy stuff will run Home Free as the SUNLU did!!!!!!!!!! Now One Major Complaint w Sunlu is it doesnt extrude well or the teeth dont grip the Plastic right!. Yes at one time 'I Had' that issue but here is how I worked around it!. A HOT TIP: Now sooner or later when the teeth wear down you will have to replace that drive extruder gear!. On most new machines its the round Brass One w the two small allen nuts sticking out the top side! Most guys re install the gear wrong, I know I did?????? Yes I did as most of us will do what the YouTube guys did as they 'Set It' Plumb in the middle!. Hey if you are satisfied and it works for you go for it!!!!!!!!!! But there's a Better Way, In stead of in the Middle I just slid the Gear down a notch and let the plastic run off the teeth on the Top Side of the Gear as it grips better and runs smoother too. Oh yes it will surely wear like they all do in time, But if you did it right there is no great need to replace the gear not by any means sic!!!... Just loosen the allens then "CAREFULLY" slide the gear back upwards until the Teeth on the bottom which are still good are NOW gripping the plastic as I think its pretty neat to reuse and get good service from the same part twice!!!!!. TO: Close; SUNLU Silk PLA is super good stuff that is easy to set up, It runs fine and makes a good part!. And to Finish Its the only PLA+ that runs a silk fibre so it has Very Considerable strength and I definitely Intend to try some Printer Gears with this and the smooth finish makes a classy looking part too!. Kudos to the Seller! Kudos to Amazon! Nuff Said... IndianaED ... show more
Reviewed in the United States on November 24, 2022 by Clarence E. Royce
    • I'm so happy I gave this filament a chance.
Color: Bundle 4kg Silk Silver+light Gold+black+...
Review Image by Tim Tim
Review Image by Tim Tim
Review Image by Tim Tim
Review Image by Tim Tim
Review Image by Tim Tim
Review Image by Tim Tim
Review Image by Tim Tim
Review Image by Tim Tim
This was the first Silk PLA I've used, and I love it. I was bracing myself for failed prints and nozzle clogs and poor print quality, but I've had zero failed prints and nothing but great results so far. The spools are smaller than the Bambu Lab ones, but they fit in my AMS great and spin without any problems. I like that the spools take up less space than the other brands I use, so I can fit more of them in a storage box. I appreciate that the spools came in reusable plastic bags and included filament clips in the box and little cardboard squares to feed the filament through to prevent snags in the AMS. The gold and silver both came out with a great glossy metallic finish, and I look forward to trying the black and white that came in my bundle. I will definitely be buying more of this stuff. SUNLU has a PDF on their website with detailed recommended settings for all their filaments on specific printers. As of January 2025, it's under Support -> Materials -> Filament Material Downloads -> Technical Data Sheet (TDS). I found my printer (Bambu Lab P1S) in their PDF and used the following settings to make a custom filament profile in my slicer: Nozzle temperature range: 225-235C Flow Ratio: 0.98 Print temperature (nozzle): 230C Bed Temperature (Textured PEI Plate): 55C Max volumetric speed: 12 Retraction Length: 0.8mm Retraction Speed: 30mm/s I also used Bambu Lab's Wiki recommended settings for printing Silk PLA: Speed - Outer wall: 30mm/s Acceleration - Normal printing: 5000 Acceleration - Outer Wall: 3000 I disabled ironing, as I've heard that makes the gloss worse on Silk. ... show more
Reviewed in the United States on January 18, 2025 by Tim Tim
    • Works perfectly on P1S with "PLA - standard" settings
Color: 1kg Silk Light Gold
I haven't bothered to "optimize" setting on the Bambu Labs P1S for this filament because Bambu Studio's "PLA-Standard" option works perfectly with not flow or adhesion issue, including in multi-filament prints. My wife loves a couple of vase-mode and standard-mode printed vases with this material. From a few feet away, these vases reflect light like one would expect a gold-ish metal vase to do. The material is very shiny and reflective, but when I used the filament on just the ~1/4" rim of some small nut bowls, the gold "look" wasn't as pronounced - not like real gold would look. Nonetheless. she loves everything I've printed for her with this filament. Admittedly, the P1S is an amazing printer and nearly all my prints come out not looking like they were 3D printed. ... show more
Reviewed in the United States on September 8, 2024 by LarryC
    • Color is off
Color: Glow in the Dark - Red to Glow Red
I like the filament, it printed nice with no issues. The only real issue i had is the color is more of a firery orange then red, and the more uv light it gets, it tends to glow orange and not red.
Reviewed in the United States on November 22, 2024 by Mitchell
    • Glowing review!
Color: Pla Glow in the Dark - Green to Glow Green
Review Image by Avatar Farms Avatar Farms
This PLA is awesome. The prints come out smooth. The quality is great. The glow? WOW! This thing glows (with blacklight charging) like a champion firefly on a hot summer night. I held it under a blacklight for about 10 seconds and was able to capture the image shown in this review. The blacklight and every other light was off. You can actually see my arm illuminated by this bad boy. I was going to give it 4 stars because it does tend to seep a little on the hot extruder and leaves a little bit of stringing, but I am just having too much fun printing awesome glowing Halloween stuff to not give it the glowing review it deserves. ... show more
Reviewed in the United States on October 2, 2024 by Avatar Farms Avatar Farms

Can't find a product?

Find it on Amazon first, then paste the link below.