Search  for anything...

Official Creality Ender 5 Plus 3D Printer with Auto Bed Leveling Sensor Kit, Dual Z-Axis Touch Screen and Glass Bed Large Printing Size 350x350x400mm

  • Based on 710 reviews
Condition: Used - Very Good
Checking for product changes

Notify me when this product is back in stock

$500.16 Why this price?

Buy Now, Pay Later


As low as / mo
  • – Up to 36-month term with PayTomorrow
  • – No impact on credit
  • – Instant approval decision
  • – Secure and straightforward checkout

Ready to go? Add this product to your cart and select a plan during checkout. Payment plans are offered through our trusted finance partners Klarna, PayTomorrow, Affirm, Afterpay, Apple Pay, and PayPal. No-credit-needed leasing options through Acima may also be available at checkout.

Learn more about financing & leasing here.

Free shipping on this product

This item is eligible for return within 30 days of receipt

To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.

To initiate a return, please visit our Returns Center.

View our full returns policy here.


Availability: Unavailable
Fulfilled by Amazon
Available payment plans shown during checkout

Features

  • Auto Bed Leveling Sensor Kit: You may receive the BL Touch auto-leveling kit or CR Touch auto-leveling kit randomly. It can precisely measure the tilt of hot bed surface and offers Z axis leveling compensation. Saving your time and reducing waste.
  • Equipped with Two Lead Screws on Z Axis: The hot bed was held stably on Z axis frames, no worry about bed wobbling and dropping, fewer points of failure and fewer headaches.
  • Dual Y Axis Motors: Y axis dual shaft motor and down-shift Z axis, moving more smoothly, ensure high precision printing.
  • Easy to Assemble and Operate: Ender 5 Plus uses touch color screen for easy and quick operation. It comes with several partially assembled kits, very easy to assemble and allow you to learn about the basic construction of 3D printer.
  • Extra Glass Plate: Add a tempered glass plate on the heated bed, which makes models are easier to be removed. It also makes the hot bed more flat and provide all-around protection.

Specs & Other Info

SpecificationDetails
BrandComgrow
MaterialAluminum
ColorBlack
Dimensions (D x W x H)28.74" x 12.2" x 29.13"
Weight48.63 lb
Launch DateOctober 16, 2019
ManufacturerCreality 3D

Frequently asked questions

The Dual Z-Axis in the Creality Ender 5 Plus provides a more stable output which results in improved precision and detailed prints. It also helps in reducing any potential for printing errors due to uneven leveling. This makes it easier to achieve higher quality prints every time.

The Auto Bed Leveling Sensor Kit in the Creality Ender 5 Plus greatly simplifies the bed leveling process, saving you time on manual calibration. The sensor automatically detects and adjusts the distance between the print head and the print bed to ensure optimal print quality. It is crucial for achieving consistent, high-quality prints.

The Creality Ender 5 Plus offers a large printing size of 350 x 350 x 400mm. This provides ample space to create larger more complex models without any need to split them into smaller parts before printing.

The Touch Screen makes the Creality Ender 5 Plus highly user-friendly. It allows users to navigate through settings and print commands easily. The Glass Bed on the other hand, provides a smooth surface for better adhesion of the prints. It is also easy to remove finished prints from glass surface. Furthermore, it distributes heat evenly across the print area, resulting in better print quality.

Top Amazon Reviews

🚀 Abunda's Overview

This is our summary and key points to consider based on customer reviews.


The Ender 5 Plus 3D printer has been reviewed as not perfectly plug-and-play ready and requires some level of experience with 3D printing. Users have praised its larger print area, the quality of prints and the potential for growth in learning and experiencing 3D printing. However, it also comes with several issues such as filament breaks, unclear instructions, noisy operation and some necessary adjustments and fixes.

Pros

  • 🔹High-quality Prints
  • 🔹Enhances learning experience in 3D printing
  • 🔹Larger print area
  • 🔹Potential for creating bigger projects

Cons

  • 🔻Frequent filament breaks
  • 🔻Confusing and incomplete instructions
  • 🔻Loud operation
  • 🔻Need for continuous adjustments and maintenance

Should I Buy It?

Given the points above, the Ender 5 Plus 3D printer would be most suitable for those who already have some experience in 3D printing and are looking for an upgrade. However, it wouldn't be ideal for someone just starting their journey with 3D printing due to the need for continuous maintenance and the complexities of operation. If you're willing to put the time and effort into troubleshooting and learning, this could be a valuable tool for you.


  • Absolutely worth it!
Last year I made my first 3d printer purchase. The ender 3, which is a great printer for beginners, IF you like to tinker with stuff. Over the past year I heavily upgraded the ender 3 and I love it. It's fantastic, however, I soon realized I've out grown my ender 3. I started printing helmets, predator masks, etc and I had to cut them up in order to print them. It was a lot of work, but doable. FLASH FORWARD to the ender 5 plus!! After selling several of my prints, I finally had some cash to spend on a bigger printer. I took a look at the artillery sidewinder x1. Almost pulled the trigger on that but I saw some major flaws in it that reviewers didn't like. So I got this printer. Let me tell you coming from an ender 3.. This printer was a dream to set up. Took less than 30 minutes (because I had experience from the ender 3) and I was up and running. First prints are these mugs in silk pla 0.4mm nozzle, 60 speed, 8%infill about 26 hours each. No estep calibration, no flow calibration, no glue or anything (glass bed is amazing!) just bed leveled using the auto bed leveling and z offset. As you can see, they look amazing. Now for the bad stuff... Well not much that can't be fixed. 1: It's loud... Like.. Really loud. My ender 3 had a silent board and it's a huge difference. My printers stay in a spare bedroom so it's not that much of a problem. I may end up getting a bigtreetech skr mini e3 with touch screen at some point. But it's not necessary right now. 2: no strain relief for the heated bed cables. Easy fix is to print one out from thingiverse. Super easy but it would have been nice if creality included that. 3: plastic extruder. Really? They can't spend the 10 bucks to put an all metal one in these? For 600, I would expect that to be included. Got one and swapped it in. No biggie 4: the spool holder. I hate them I have a spool holder with bearings I use on the side. Again, not a big deal to me but still should be mentioned. 4: Bed leveling springs.. Terrible. Switch to silicone bed leveling mounts. With the glass and bl touch you'll never have to mess with it again. If you're looking for your first 3d printer, the ender 3 is great, however, think long term about what you want to print. The amount of money you'll put into an ender 3 you'd be better off getting this printer. It has the bl touch, glass bed, dual z, 350x350 print size, and a sturdy frame. I love it and creality knocked it out of the park. UPDATE: I still love this printer, however, I can't understand why you pay so much money for them to put a plastic crappy extruder. As I always do, I was swapping it out with an all metal one. Not surprisingly, the plastic one was already cracked. I maybe used this printer for about 50 hours so who knows if it came like this or broke as I was using it. ... show more
Reviewed in the United States on May 22, 2021 by blackbelt38 blackbelt38

  • Very happy with the prints....but takes a little time.
This is my first 3D printer. Purchased the 5-Plus because I needed one that could print larger than most home printers. Mechanical assembly was straight forward but documentation was not great. Some wire connections not very clear. For someone with printer experience, probably obvious. Took me a few minutes to figure out. I did a fair amount of research on YT and made a few upgrades before really even trying to print. Metal extruder and Capricorn tube. Also purchased the silent main board....but after my first few prints, I sent it back, never opened the box. Printer is in my garage, and I did not find the noise objectionable. A full set of operating instructions would be a "nice touch". There is very little info provided. First couple of print attempts, printhead slammed into the front left corner....found out the default size for the bed setup in the Creality Slicer for the Ender 5 Plus was 370x370mm, NOT 350x350, this was causing the printer to go off the grid trying to lay down the head clearing print lines. Once I reset that and resliced, all worked fine. Fortunately, no damage done on the first 3 print attempts, before realizing the cause. My first print was the "test rabbit" included on the micro SD (I think) and it came out surprisingly good for my first shot using PLA. I had several items ready to print and used TPU for those. Both came out pretty good (1 very good, the other acceptable due to playing with settings). Next up was PETG. While the first prints were successful, I did have some warping. Had a few complete failures after flipping over the unit to put it in an enclosure and then not going back through the leveling process - big mistake. With a good leveling and now in the enclosure, the next few PETG prints were better than expected. Keeping the enclosure warm (~100F) eliminated the warping. Had to modify some temps but the last two PETG prints were very nice. A little stringing but still pretty good. Still tuning my settings. Bottom line, I'm very pleased with this printer. No, I'm not experienced so maybe I'm not being "picky enough", but despite a few learning failures, I'm very happy with my results. A good set of user instructions would've saved a fair amount of fumbling and cleared up some misunderstandings of what the display was telling me. Again, an experienced printer would probably not have had this problem. ... show more
Reviewed in the United States on February 21, 2023 by BillG

Can't find a product?

Find it on Amazon first, then paste the link below.