Search  for anything...

HORTIPOTS Aeroponic Cloner Machine 24 Site for Cuttings Rooting Using 2 inch Neoprene Inserts or 2 inch Clone Collars

  • Based on 395 reviews
Condition: New
Checking for product changes
$104.95 Why this price?
Holiday Deal · 13% off was $119.98

Buy Now, Pay Later


As low as $17.49 / mo
  • – 6-month term
  • – No impact on credit
  • – Instant approval decision
  • – Secure and straightforward checkout

Ready to go? Add this product to your cart and select a plan during checkout. Payment plans are offered through our trusted finance partners Klarna, PayTomorrow, Affirm, Afterpay, Apple Pay, and PayPal. No-credit-needed leasing options through Acima may also be available at checkout.

Learn more about financing & leasing here.

Free shipping on this product

Eligible for Return, Refund or Replacement within 30 days of receipt

To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.

To initiate a return, please visit our Returns Center.

View our full returns policy here.


Availability: In Stock.
Fulfilled by Amazon

Arrives Friday, Dec 27
Order within 11 hours and 25 minutes
Available payment plans shown during checkout

Features

  • INDUSTRY MADE CLONING MACHINE using popular 2 INCH CLONE COLLARS: not hand-made DIY thing. All engineering reliable parts, SOLD THOUSANDS WORLDWIDE SINCE 2016 WITHOUT MAJOR QUALITY ISSUE!!!
  • AEROPONIC PROPAGATOR CLONING SYSTEM using popular 2 INCH NEOPRENE COLLARS: Root your cuttings in 4-10 days and consistent 100% success rate one clone after clone. Relax and wait HortiPots Cloning Machine gives you the easiest cloning experience ever. With easy to follow assembly guide and clone tips to make cloning a simple operation
  • FREE PROPAGATION DOME INCLUDED: Our plant cloning system comes with all parts needed including special-made foldable clear humidity dome (FREE) preventing leaf transpiration and initial transplant shock in the first few hours of cloning, especially in dry growing environment
  • WORKS GREAT WITHOUT AIR PUMP: Multiple cords outlets and air venting/ circulating design on top lid needs no air pumping to get extra oxygen in and hot air out of growing chamber while patent pending spray manifold requires smaller water pump and generate less heat in water
  • NO CLOGGING & NO WATER LEAKING : Our cloning machine pump is not only UL-listed for safety use, but also a quality water pump with pre-filter housing to keep cloner sprayers free from debris and preventing clogging when cloning aeroponically

Description

HortiPots Cloning Machines series 24 site/ 48 site/ 96 site series.Please purchase 2 inch Cloning Collars (48~48.3 mm diameter) from HortiPots when you want to replace used Cloning Collars. Other sizes of Clone Collars are NOT totally right for our Aeroponic Cloning System. Made from durable BPA-free 100% new ABS and PP material. Comes with all parts needed including foldable clear humidity dome to plug and play, just add a light on top. This unit do NOT include clone solutions and rooting gels. WARRANTY: The chosen water pumps for our cloning machines are UL-safety-approved and produced by a professional pump supplier, who also produce for U.S. major brand-names of Aquarium pumps. However, water pumps alike products in the field might have around 0.1 % defective rate for different reasons. If it happened to you that water pump dies for any reason within 1 year of receipt date, please write us giving your address, phone number, and name at Amazon emailing system, so that we can send you a new pump to replace it immediately without your returning it back.At the same time, we always have a few water pumps and aeroponic manifolds of all models stocked at FBA warehouse so that growers can get the parts when needed any time. Thank you so much.Our Water Pumps and patent-pending Manifolds MD9-35 are sold thousands to U.S. market and AUS since 2016 without major quality issues. HortiPots' Manifolds (spray heads) are tested 100% at the factory. If they work NOT right for your cuttings, please return the whole unit and get a refund, thank you!

Indoor/Outdoor Usage: Indoor


Brand: HORTIPOTS


Color: Black


Unit Count: 1.0 Count


Product Care Instructions: Wipe with Dry Cloth


Expected Plant Height: 48.3 Millimeters


Moisture Needs: Moderate Watering


UPC:


Indoor/Outdoor Usage: ‎Indoor


Brand: ‎HORTIPOTS


Color: ‎Black


Unit Count: ‎1.0 Count


Product Care Instructions: ‎Wipe with Dry Cloth


Expected Plant Height: ‎48.3 Millimeters


Moisture Needs: ‎Moderate Watering


UPC: ‎791306358062


Item Weight: ‎4.58 pounds


Product Dimensions: ‎16 x 12 x 6 inches


Country of Origin: ‎China


Item model number: ‎KFP670


Is Discontinued By Manufacturer: ‎No


Date First Available: November 22, 2018


Frequently asked questions

If you place your order now, the estimated arrival date for this product is: Friday, Dec 27

Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

  • Klarna Financing
  • Affirm Pay in 4
  • Affirm Financing
  • Afterpay Financing
  • PayTomorrow Financing
  • Financing through Apple Pay
Leasing options through Acima may also be available during checkout.

Learn more about financing & leasing here.

Top Amazon Reviews


  • Easier way to clone
Works perfect and easy to put together. Lost the first batch because the ph was too high, but got it down to 6 and got roots in less than a week. Way better than using soil. If you do as you should you will get 100% of your pants rooted. I live in Florida, so they got so hot one time they actually wilted. I thought they were done, but the next morning they were all upright again. Good product for the price. ... show more
Reviewed in the United States on July 27, 2023 by Robert L. Padgett Robert L. Padgett

  • Good quality
Just opened and set it up, have not used it yet but overall first impressions are good. It came with a hard clear plastic humidity dome and not the cheaper vinyl one which I'm happy with. They also included an extra filter for the pump and spray nozzles. Since I won't be actually using it for another week or so I can't say anything about the pump itself but I will edit the review once I actually fill it and use it. What I can say is everything fits really well and is tight. Nothing seems like it will be a problem with proper care. From previous experience with a different brand I would recommend replacing the collars at least every 4 cycles of use. Bacteria will be imbedded in there and is impossible to get out which will cause molds to grow. I also recommend adding a air stone to help keep the water oxygenated. A timer for the water pump at 15 minutes on and 15 off will help keep the water temperature in the correct range as long as the ambient temperature is good. As long as the pump works as it should then I would highly recommend this cloner to anyone needing a small good quality home cloning system. Again, once I actually use it I will update this and let you know. ... show more
Reviewed in the United States on May 13, 2024 by Hard earned ink

  • Nice Usable Cloner for the Money!
I think the black plastic material the unit is made of is a bit flimsy but then again there are no real stresses on it and it does what it is designed to do. The clear acrylic cover may leak some fluid down the side of the upper stage of the cloner but it is caught by the ledge at the lower reservoir stage and returned to the reservoir. So this may be why some have claimed that it leaks. It doesn't leak any fluid to the table it is sitting on however. The 2" plugs are not quite that diameter so they fit loosely in the ports -- if they were a bit bigger the fit would be more snug and less nutrient solution would splash up into the upper domed plant area and the cuttings would be held more firmly in the plugs. I think that "as is" the cloner is a bit deficient if that is all you plan to buy... you need to be able to test the nutrient solution pH (important) and adjust it up or down (in my case always downward... the nutrient solution gets more alkaline over time). You also probably don't want your pump running all the time -- it wasn't really designed for that kind of duty-cycle IMHO. In large professional aeroponic operations they run the spray of nutrient for only a few seconds for each minute. I added an interval timer to the setup to set the nutrient spray to 20 seconds every 5 minutes. I don't think you really want the pump to run 24/7. Plus... if the pump runs out of solution since the nutrient solution is used to cool the pump it will fail -- so you have to watch this. Not likely that much water will evaporate even in a month use I didn't note any difference in nutrient level. Here is the timer I ordered: https://www.amazon.com/gp/product/B096CNZZXW/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1 pH keeps creeping upward... goes from 6.0 to 7.4 in just 3 days! Getting too alkaline -- so I must continually make adjustments every few days adding about 10cc of distilled vinegar to bring the pH down to 6.0 again. Best to keep the pH about 6.0 for rooting cuttings and it rises to 7.4 rather quickly. Thinking of getting some citric-acid to make a better pH down solution. I believe pH meters are troublesome (need cleaning/recalibration, etc.). So I opted for a litmus-style indicator paper. Using one that is easy to read and within the ranges I am interested here: https://www.amazon.com/gp/product/B08MQ4RKS8/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1 Got this Total Dissolved Solids (TDS) meter and tested it with distilled water, spring water, tap water, etc. and I believe it is accurate. Getting 1 PPM TDS for distilled water consistently and testing other waters are consistent as well. This unit has temperature compensation built-in and also can tell you the temperature of your nutrient solution (Using Clonex). https://www.amazon.com/gp/product/B07YFQPCDY/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1 Also added some LED grow lights that have an interval timer built-in for 4h on 4h off.... 6h... 8h... 12h. Choice of blue-red wavelenghts or white or both. It is important to not have too much light while trying to form roots because the plan will get all the energy it needs from photosynthesis and it won't focus on growing roots. https://www.amazon.com/gp/product/B07S3MT5GX/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&psc=1 Also added a small aquarium air pump and put an air-stone in the bottom of the reservoir to improve root zone oxygenation from local Walmart. I am running this 24/7.... may put it on some kind of interval as well. If the pump pulls in ammonia from the air it will make your nutrient solution alkali -- you don't want that. I am thinking maybe running the air into an ammonia blocking (absorbing) compound... maybe the pH won't keep rising so fast? UPDATE: I made some mistakes and all 24 geranium cuttings died off. Some mold at the top side of the plant. I know I didn't completely wash off the Dawn dish soap I used as a wetting agent nor all of the Clorox and Peroxide I used as a sterilizing agent for the cuttings. Also, I let the pH rise and stay high for long periods of time (before I had pH measuring papers). Also my geranium cuttings were red -- going dormant? They had spent a few cold nights outside. That may have been a set back -- all the red leaves died off and green leaves began to develop. I had added some blue-red-white lighting but think I should have a light source with some UV content to kill off any mold that may want to start. Also, ran the light too long and the plants started generating new leaves whiteout roots (things I have learned). I found this light and it has some 395nm UV content and fits the top of the cloner. I will just sit it on top. https://www.amazon.com/gp/product/B093BLNT14/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 ... show more
Reviewed in the United States on January 16, 2022 by Jay D. Anderson

  • Perfect clones the first time we used it
It took less than 3 weeks to produce an excellent root system on our clones. The roots were over 1/2 inch long and there were many of them on each clone stem. Although this machine holds many more, we started with only four clones to test the machine and everyone of the clones produced great roots. The cuttings never wilted during the entire cloning process. We are cloning kratom trees and tried other methods with only partial success. This machine improved our success rate and it made the process automatic. We use it indoors and let the pump run continuously. Because it is indoors, we purchased a full spectrum light for under $30 and put it on a timer (purchased separately for a few dollars) so all we had to do was check the water level once a day. ... show more
Reviewed in the United States on May 23, 2020 by Camelot Keven

  • 7 day roots using only H2O
People complain to much. I got the hard dome, I prefer it, fits tight. I had roots in 7 days, and they weren't even the healthiest of clones. This thing works. It only leaks if your an idiot (fill it up to much, or dont put the lid on tight). $100 for 24 clones....it pays for itself on the first run. Bad reviews almost scared me away im glad they didnt.Some say pump overheating....well its sopposed to be in water when you turn it on so how would they know its overheating? Also I keep the pump running 24/7 no cutting it on and off. Its a strong little pump. ... show more
Reviewed in the United States on February 12, 2022 by Derek Powell

  • Why is this on my shelf, unused?
This will work to root clones. Be aware that the roots will grow quite long while you are not paying attention. My first experience setting it up with the clones and the proper nutes, and walking away for 3 weeks for travel. The roots on some of the clones were 18-24 inches long! My biggest concern and perhaps why it is sitting on the shelf and not being used, is that the clones come out very fragile. They have been immersed in a continual spray of nutes and will die in a minute when planted if not covered by a glass jar until they have hardened off. Works...just be aware of the tending you must do. ... show more
Reviewed in the United States on January 31, 2023 by Stephen Hoxworth

  • The top for the misters doesn't properly fit the water pump
Water sprays everywhere, I'm having to super glue the pieces together but even then it has a loss of pressure. The suction from the top misters never stay on and pop off when the pump starts running. The pump stopped working after 2 months of fixing the issues it came with, waste of money.
Reviewed in the United States on May 20, 2023 by Drew

Can't find a product?

Find it on Amazon first, then paste the link below.