Search  for anything...
ANYCUBIC

Anycubic Kobra Max 3D Printer, Large 3D Printer with Auto Leveling Pre-Installed, Stronger Construction and Higher Precision, Filament Run-Out Detection Easy to Use, Big Size 17.7" x 15.7" x 15.7"

    • Based on 645 reviews
Condition: Used - Like New
Checking for product changes
$573.76 Why this price?

Buy Now, Pay Later

As low as / mo
  • – Up to 36-month term with PayTomorrow
  • – No impact on credit
  • – Instant approval decision
  • – Secure and straightforward checkout

Ready to go? Add this product to your cart and select a plan during checkout. Payment plans are offered through our trusted finance partners Klarna, PayTomorrow, Affirm, Afterpay, Apple Pay, and PayPal. No-credit-needed leasing options through Acima may also be available at checkout.

Learn more about financing & leasing here.

Selected Option

Free shipping on this product

This item is eligible for return within 30 days of receipt

To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

Availability: Only 1 left in stock, order soon!
Fulfilled by Amazon
Arrives Wednesday, Oct 23
Order within 15 hours and 43 minutes
Available payment plans shown during checkout

Size: ANYCUBIC KOBRA MAX


Features

  • Large Build Size ANYCUBIC KOBRA MAX 3D Printer comes with a large build volume of 17.7 x 15.7 x 15.7 in. / 450 x 400 x 400mm, which is enough for daily and household using, providing you larger printing space and more choices of creation.
  • Self-developed Anycubic LeviQ Leveling Function Anycubic upgrade auto leveling function with a 25-point smart and precise calibration. It can compensate the heated bed unevenness automatically. Leveling and printing can be completed with one button, simple operation and brings you greater printing experience.
  • Needless to waitThe maximum printing speed is 180mm/s (Average speed is 80mm/s, 167% faster than industry standard). Faster speed enables you to enjoy more joy of 3d printing.
  • Stronger Construction & Higher Precision ANYCUBIC KOBRA MAX 3D Printer is equipped with double thread Z-axis moving construction. It can minimize the shaking, does not lose steps and more model details can be restored. The modular design allows the printer to be assembled only in 10 minutes.
  • Filament Runout Detection Equipped with a filament runout sensor, it can monitor the supply of filament intelligently. If your printer runs out of filament, it will stop automatically without losing your printing progress.
  • Smarter Printing ExperienceThe 4.3-inch full-colored and sensitive LCD Touchscreen with comprehensive functions and settings offers a better printing experience.
  • 100% Satisfaction Service ANYCUBIC is one of the best 3d printer brands, which provide the best 3d printers for every customer. We also provide the lifetime technical support and 24 hours professional customer service.

Brand: ANYCUBIC


Material: Pla


Color: Anycubic Kobra Max


Product Dimensions: 15"D x 20"W x 20"H


Item Weight: 42.6 Pounds


Product Dimensions: 28.35 x 28.15 x 26.18 inches


Item Weight: 42.6 pounds


Item model number: Anycubic Kobra Max


Date First Available: January 14, 2022


Manufacturer: ANYCUBIC


Frequently asked questions

If you place your order now, the estimated arrival date for this product is: Wednesday, Oct 23

Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

  • Klarna Financing
  • Affirm Pay in 4
  • Affirm Financing
  • Afterpay Financing
  • PayTomorrow Financing
  • Apple Pay Later
Leasing options through Acima may also be available during checkout.

Learn more about financing & leasing here.

Similar Products

Top Amazon Reviews

🚀 Abunda's Overview

This is our summary and key points to consider based on customer reviews.

The Anycubic 3D Printer delivers high-quality, detailed prints along with some very impressive features such as auto-leveling bed, removable print bed, and a touchscreen. Setup and assembly can be challenging, however, it is praised as an excellent printer for those focusing on detail rather than speed or beginner-friendliness. Despite some users experiencing technical issues, the customer response is generally positive as the printer performs exceptionally well right out of the box.

Pros

  • 👍 Provides highly detailed and precise prints
  • 👍 Includes auto leveling bed, a touchscreen, and easy to remove print bed
  • 👍 Overall impressive performance right out of the box

Cons

  • 👎 Installation and assembly can be complicated, particularly for beginners
  • 👎 The printer runs slower than average
  • 👎 Some users experienced consistent technical issues

Should I Buy It?

If you value high-quality, detailed prints and are ready to handle a challenging setup process, this could be a great choice. With its advanced features and overall functionality, it's ideal for those with some 3D printing experience. However, for beginners or those seeking faster speeds, you might want to consider other options.

    • Good unit, but no manual options for leveling.
It prints quite well, and was up and running in under 10 minutes. There are no bed leveling screws, but so long as you make sure the gantry is leveled AND squared, this isn't a problem. ABL is done via pressing the nozzle itself against the bed to detect strain across a 25 point grid. Heating is plenty fast, and the unit comes with a PEI-on-glass bed. For an extra 35 dollars, you can get the flex plate (which i suggest). Cons: does not handle z-hop commands well. This results in pills all over the side of the print, and it WILL cause an aligned z seam to swell up and ruin your print. E-steps are usually off on the extruder alone. Typically, it is 6mm short. The filament runout sensor is on a flimsy mount, and not only flexes during retracions, but will squeak with fast retraction settings. Some oil solves the squeak for a moment, but it would benefit the sensor if it had a teflon coating, this would help. You have to heat the unit to 220c minimum in order to auto feed or remove filament, and that cannot be changed. Why? No manual leveling options. If the nozzle is dragging on one side, you may likely need to force the gantry to max Z height in order to level out the Z screws. Pros: decent cooling, great temperature control, and easy setup in pronterface. Stepper drivers are digitally programmed, and you can check settings with m500 Offers PLA and ABS preheating options. Rapidly heats up to print temp and doesnt vary much at all, even with full cooling. Rock solid. Capable of printing at 120mm/s with accuracy of +/- 0.45mm in x and y using stock parts. Super quiet. Unless you're speed printing, it's silent. Notes: Advised jerk is 8-15mm/s. 10 is what mine is set for in all respects. Max moving acceleration should be 5000 or less Max acceleration on any other setting shouldnt exceed 3700, as it has no appreciable benefit above this, but the suggested acceleration is 800 to 2000 for most prints. 225c at 15mm/s is perfect for the first bridging layer. Tends to do a small deceleration across exact center in the bed. I dont know why, but it does this for anything printed within 25mm of the center. It isnt a problem, but can produce noticeable effects on the print along outer walls when going at 80mm/s or higher. Do not insert the SD card into the touch screen. This port is for bios upgrades only. Overall, totally worth the price, and a blast to operate. You wont be disappointed. ... show more
Reviewed in the United States on March 26, 2023 by EDWARD MCGUIRE
    • Nice large format 3D printer for the money
Very happy with my purchase. I got tired of doing extra work (CAD, assembly) breaking down large parts just so I can print them, so I needed a large format printer. After looking quite a bit for one that's worth the price, this was the best bang for the buck. It doesn't have all the smarts and the automated adjustments that my Prusa MK3S with multimaterial selector module has, but it didn't cost me 3 times the cost either. Prusa would be a better fit for beginners, but this one isn't going to give a beginner too much trouble either. There are things that need to be learned either way. I like that it still does its bed autoleveling before the print job, has a nice touchscreen and decent menus and it actually did a decent job right out of the box in my case even with PETG. I'll have to do some tweaks and calibrations I see people have great success with, but I didn't have the time yet. ... show more
Reviewed in the United States on September 11, 2023 by Leo M
    • IMMEDIATE FAILURES WITH NO CUSTOMER SUPPORT
I have now purchased three of these printers. THE GOOD- because, there would be some if the machines worked long enough to enjoy it. -Autoleveling is amazing, and works very well. good setup, have had no issues with leveling. -HUGE print area. there are no other printers in this size class, for the price. - Print quality was pretty good, while they worked. -runout sensor works as intended, which you need for prints this big -volcano hotend. good for speedy printing, which you need for a machine this size. THE BAD- all good things come to an end I suppose? - first machine randomly stopped working partway through prints. no error codes, just stopped printing. cools off (which is NOT what happens when the runout sensor is tripped) and no way to restart it. -the second machine heated bed is no longer working. - NO CUSTOMER SUPPORT RESPONSE. - NOT ELIGIBLE FOR REPLACEMENT THROUGH AMAZON - AMAZON CUSTOMER SERVICE NO HELP. they offered to help me contact the seller. I already tried that amazon, I don't want a REFUND I want a WORKING MACHINE. They changed their return/replace policy on this machine the day I bought it, so now it is return only. The third one I bought is still in the box. I'll update this review if the seller responds or if the third one works for more than a few days. ... show more
Reviewed in the United States on November 4, 2022 by Amazon Customer
    • First 3D printer I’ve owned
Review Image by Nathaniel Johnson Nathaniel Johnson
The media could not be loaded. The instructions for assembly are not detailed enough, and leave one searching YouTube for how-to videos. Product had a malfunction and a piece broke immediately after turning on, so contacted manufacturer tech support. They were very responsive, having a new part shipped the next day, it took 15 days to come from China, so normal shipping speeds for international delivery. My only other issue was the provided SD card lost its formatting after two prints. I had to reformat it and lost all of the text files and print files I had stored on it (hoping the text files that came on it weren’t important, I never looked at them!). Anycubic reached out after delivery to ensure my printer was working, and to offer a 2kg roll of filament for my wait. Again, amazing customer service! I would also like to add that I have tried out several filaments from other manufacturers, but Anycubic’s filament has produced my best results. I would recommend their printer and filament to anyone looking to get into 3D printing. This is my first 3D printer, but very easy to get up and running. ... show more
Reviewed in the United States on January 26, 2024 by Nathaniel Johnson Nathaniel Johnson

Can't find a product?

Find it on Amazon first, then paste the link below.