2920W 48V Complete Solar Wind Kit with Battery and Inverter: 1000W Wind Turbine Generator + 16PCS 120W Solar Panels + 2PCS 2560WH 51.2V Lithium Battery + MPPT Controller + 3KW Inverter +Accessory

Features

• This 2920W 48V hybrid Solar Wind Backup Power Kit help you to generate power for remote areas in all seasons and save energy. a good choice for both residential & commercial use. 1000w wind turbine can provide power throughout the night, combined with solar panels can augment the charging capabilities of your battery.
• This Solar Wind Energy kit comes with 16pcs 120w monocrystalline solar panels, withstand high wind and snow loads, Corrosion-resistant aluminum frame,Diodes are pre-installed in junction box and a pair of 90cm cables with connectors are installed on the panels for easy connection
• The 1000W 48V wind turbine generator has 5 blades, higher efficiency.Starting wind speed can be as low as 2.5m/s, more powerful.Easy to assemble,Low noise,Hermetically sealed to ensure dust and rain can not intrude into the interior of wind turbine.
• 40A 48 Volt Maximum Power Point Tracking(MPPT) photovoltaic (PV) battery charge controller. through the use of MPPT technology, can increase charge current up to 30% or more compared to conventional controllers.3000W Pure Sine Wave Power Inverter protection : Overload, over temp, high voltage, low voltage, short circuit, internally fused, low and high voltage alarm, cooling fan, and isolated ground neutral.
• Great for all off-grid installations on motorhome, house,home roof,garage,garden,cabin,shed,boats ect.also can be used for any stand-alone off-grid solar power system with batteries, such as a household solar system or solar lighting

Description

NOTES: We will ship with standard specification based on different countries as : USA: 110V / EU: 220V / AU: 240V The Giosolar 2920W Solar Wind kit includes: - 16x 120W Monocrystalline solar panels with 90mm of special solar cable and waterproof connectors - 1x 1000W 48V Wind Turbine Generator with 5 blades - 1x 48V 40A MPPT Solar Charge Controller - 1x Wind Charge Controller - 1x 3000W Peak 6000W Pure Sine Wave Power Inverter - 1x 5M solar cable with connectors ( Red about 2.5M, Black about 2.5M) - 16 Set of Z mounting brackets - 1x Branch Connectors - 2x 51.2.v 2560wh Life PO4 Lithium Iron Phosphate Battery - 2x Battery cable Pair[2x (Red 2.5M + Black 2.5M)] 120W Mono Solar Panel Specifications: - Maximum Power: 120W - Optimum Operating Voltage(Vmp): 18V - Open Circuit Voltage(Voc): 21.2V - Optimum Operating Current (Imp):6.67A - Short-Circuit Current (Isc): 7.23A - Dimensions: 101567030mm/19.9626.381.18inch - Weight: 15.5 lbs(7KG) - 90mm of special cable with male & female connectors attached 1000W 48V Wind Turbine Specification: -Rated power：1000W -Rated DC voltage：DC 48V -Rated current：41A/21A -Rated speed：650r/m -Max power：1200W -Number of blade: 5 pcs -Starting wind speed：3m/s/2.5 m/s -Cut-in wind speed：3.5m/s /3 m/s -Cut-out wind speed：15m/s -Security wind speed：40m/s -Rated wind speed：12m/s -Engine：Three-phase permanent magnel generator -Rotor diameter: 2200mm -Blade material: FRP (fiber glass- reinforced plastics) -Output line anti-winding device: Over all three-phase commutator -Over-speed wind protection: Tip stall protection + tumed protection + electomagnetic brake -Equipment surface protection: Aluminum oxide + plastic coating -Working temperature：-45°C-70°C -N.W：31KG -Packing material: Wooden case and foam material

Manufacturer: Giosolar

Item model number: GSN-W1048S+16AP+M40-48+4Y+3048+2BT50A-48