Search  for anything...
PrimoChill

PrimoChill Hardline/Rigid Watercooling Tubing Finishing Bit (RFB) - Ream/Deburr/Trim - 12mm ID x 16mm OD

    • Based on 705 reviews
Condition: New
Checking for product changes
$39.95 Why this price?
Save $10.04 was $49.99

Buy Now, Pay Later

As low as $9 / mo
  • – 4-month term
  • – No impact on credit
  • – Instant approval decision
  • – Secure and straightforward checkout

Ready to go? Add this product to your cart and select a plan during checkout. Payment plans are offered through our trusted finance partners Klarna, PayTomorrow, Affirm, Afterpay, Apple Pay, and PayPal. No-credit-needed leasing options through Acima may also be available at checkout.

Learn more about financing & leasing here.

Selected Option

Free shipping on this product

30-day refund/replacement

To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

Availability: In Stock.
Fulfilled by Amazon
Arrives Nov 30 – Dec 4
Order within 20 hours and 26 minutes
Available payment plans shown during checkout

Size: 12mm ID x 16mm OD


Features

  • Take your watercooling game to the next level with the PrimoChill RFB Rigid Tubing Finishing Bit, the must-have accessory for achieving professional-looking results.
  • Achieve flawless results with the PrimoChill RFB Rigid Finishing Bit, perfect for reaming, deburring, and trimming your hardline watercooling tubing with ease.
  • Experience professional-level precision as you effortlessly create clean, smooth cuts to ensure a perfect fit for your custom watercooling loop.
  • Designed to be compatible with a wide range of rigid tubing sizes, the PrimoChill RFB Rigid Tubing Finishing Bit offers added versatility for your watercooling setup.
  • You can elevate the aesthetics of your PC build with this essential tool, ensuring that every detail of your custom watercooling loop meets your high standards of perfection.

Size: 12mm ID x 16mm OD


Material: PETG, PMMA (Due to extremely quick dulling of the bit, Copper tubing is not recommended.)


Brand: PrimoChill


Shank Diameter: 12 Millimeters


Item Weight: 0.01 Kilograms


Cut Type: ‎Round-Over Cut


Cutting Diameter: ‎0.63 Inches


Item model number: ‎RT16M-TOOL


Item Weight: ‎0.352 ounces


Item Dimensions LxWxH: ‎0.01 x 0.01 inches


Manufacturer: ‎PrimoChill


Is Discontinued By Manufacturer: ‎No


Date First Available: ‎January 21, 2019


Frequently asked questions

If you place your order now, the estimated arrival date for this product is: Nov 30 – Dec 4

Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

  • Klarna Financing
  • Affirm Pay in 4
  • Affirm Financing
  • Afterpay Financing
  • PayTomorrow Financing
  • Financing through Apple Pay
Leasing options through Acima may also be available during checkout.

Learn more about financing & leasing here.

Similar Products

Top Amazon Reviews

    • Must-Have Tool for Custom Water-Cooled Builds
Size: 10mm ID x 14mm OD
If you're working on a water-cooled PC build and you're not using the PrimoChill Hardline/Rigid Watercooling Tubing Finishing Bit, you're missing out big time. This tool is an absolute game-changer for anyone dealing with hardline tubing. Chamfering the tubes, which is crucial for a perfect fit and finish, literally takes just 2 seconds with this bit. It's incredibly efficient and takes away so much of the hassle typically associated with preparing tubing for a water-cooling system. The ease and speed at which it works are just phenomenal. It turns what used to be a tedious part of the build process into something quick and enjoyable. The quality of the finish it provides is equally impressive. It leaves the edges of the tubes smooth and perfectly angled for insertion into fittings, reducing the risk of leaks and ensuring a clean, professional look for your setup. I can't emphasize enough how much of a beast this tool is. It's well-built, durable, and perfectly designed for its purpose. Using it has made my water-cooling setup process much more straightforward and enjoyable. In conclusion, the PrimoChill Hardline/Rigid Watercooling Tubing Finishing Bit is an essential tool for any DIY PC builder venturing into custom water-cooling. It saves time, effort, and ensures a high-quality finish to your tubing work. Don't do a water-cooled build without it – it's that good and absolutely worth the investment. ... show more
Reviewed in the United States on November 10, 2023 by Jason
    • Really Nice Quality And Works Perfectly...
Size: 10mm ID x 14mm OD
Used this to finish ends on 14mm pmmg tubing. This bit is excellent quality and works perfectly to trim and debur ends of the tubing. Expensive, but an excellent quality tool to have.
Reviewed in the United States on July 23, 2024 by Gary
    • Can be useful if used correctly
Size: 10mm ID x 12mm OD
This tool can be useful with a couple of things to keep in mind. First is the spin of the drill, going the wrong direction can lead to very poor performance. Running drill in reverse is the way it is supposed to be run. The second issue is the bearing. It has to be smaller than the ID of your tubing, that is not a flaw but rather a design choice. when you cut tubing, there is a bur on the inside and that would make a perfectly 10mm bearing nearly imposible to get into the tubing to do the job. I actually got 10mm bearing to replace the 9mm bearing so it fits perfectly but then very difficult for the tool to fit into the tube. ... show more
Reviewed in the United States on May 20, 2024 by q
    • Where have you been my whole life?!
Size: 10mm ID x 14mm OD
Review Image by negativelocity negativelocity
Don't understand the negative reviews. I mean, I guess I do, but the comments that I mangles the tubes or the bearing doesn't fit right, IMHO, are user error. I don't believe the bearing needs or is supposed to fill the internal diameter of the tube. It's there in case it becomes out of alignment so it doesn't shatter your tube. Otherwise, as long as you hold straight pressure, evenly, it's self centering. I would recommend turning your drill down to a slower speed (if possible), it doesn't require high rpm to be effective. Slow and steady makes quick work of acrylic, save a lot of time smoothing the outter and inner tubing. It also requires a lot less to get a smooth end. Don't over think it, don't over do it; it's not a hammer. Done right it will save you time and leave a perfect finish to you tube cuts. Definitely recommended. ... show more
Reviewed in the United States on June 13, 2024 by negativelocity negativelocity
    • UPDATE! Wrong size shipped (10/14mm bit does not work with 10/14mm tubing!)
Size: 10mm ID x 14mm OD
UPDATE: After being frustrated with the size being so far off, I took a chance and ordered another of these - this one worked very well with the same 10/14mm pipe that the last one didn't fit! I've updated my review to 4 stars to reflect this. Overall, this tool saves time and works well, though it is definitely not a must-have. Do note after reading reviews, it appears I was not the only one who received a bit of the wrong size - so if you do buy, make sure to carefully check to make sure you got the right bit, the label being correct on the package is NOT enough. Original Review: Verified with digital calipers, the 10/14mm bit will not fit actual 10/14mm tubing. I tried with EKWB HD 10/14mm tubing and the OD of the tubing would not fit inside the bit channels. Very disappointing. The inner bearing of the bit is exactly 9mm, while the maximum outer diameter of tubing it would fit is about 13.25mm, but the center point is 6mm (e.g. 12mm OD tubing). Otherwise, the bit is sharp and easy to use. I would love to get one sized properly for 10/14mm tubing. Double checked the box - says 10/14mm - but the bit is not stamped with a size. Either the product is boxed wrong, or it does not fit. ... show more
Reviewed in the United States on October 13, 2020 by Scott
    • This tool is needed!
Size: 10mm ID x 14mm OD
Review Image by Robert Stevens Robert Stevens
The tool is a must-have! Made it easy to shorten and smooth up the ends. You can be more precise when cutting the Tubing with this cutting tool. Now heating and bending the tubing I could use a little help:)
Reviewed in the United States on July 15, 2024 by Robert Stevens Robert Stevens
    • Works really well
Size: 12mm ID x 16mm OD
A bit pricey for a drill bit, but this works extremely well. I bought it as an impulse when purchasing some fittings and it happened to pop up and thought I'd give it a try. Gives a nice smooth finish. I used with EKWB PETG tubing.
Reviewed in the United States on June 20, 2024 by J
    • I would not be sane if I didn't use this!
Size: 10mm ID x 14mm OD
It was my first time building a custom watercooling loop for my PC. I did not even like using distro-plates because in my opinion, they are not the classiest. So, that makes the build harder because there will be more bends to make (not much parallels when compared to using distro-plate). With that being said, this product is very effective. With the amount of tubes I had to bend, there were a lot of times where I would leave decent amount of extra tube so I can simply cut more if needed. I would test the length of my tube every so often, meaning I used to product over and over to make sure my O-rings do not get cut. I can imagine if I used a normal deburr tool, I would have had such a hard time. Using this tool would cut the amount of time to deburr to 5-10 seconds (not even when you get used to it). So, that gave me a very nice advantage of actually testing if my tubes were good to go or not, rather than wasting a lot of time deburring because I wanted to save a little more cash. Trust me, this is a tool that's worth the investment!! My only tip when using it is not to push against the tube too hard while using it. At least in my experience, it lead my tubes to become uneven. Going at it with just the right amount of force would result in a very clean/smooth ends of the tubes. Do not sweat if you used it for the first time and it feels weird, just trust the process and you will get used to it in no time! ... show more
Reviewed in the United States on August 20, 2023 by SirBlank

Can't find a product?

Find it on Amazon first, then paste the link below.