Ready to go? Add this product to your cart and select a plan during checkout. Payment plans are offered through our trusted finance partners Klarna, PayTomorrow, Affirm, Afterpay, Apple Pay, and PayPal. No-credit-needed leasing options through Acima may also be available at checkout.
Learn more about financing & leasing here.
This item is eligible for return within 30 days of receipt
To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
Size: 7-Feet
Color: Charcoal
Features
Description
Wear and damage to your boat’s keel can break down its protective gel-coat finish, allowing water to reach and destroy the fiberglass laminates. Protect your investment with the Megaware KeelGuard, a powerful abrasion-resistant keel protector, that prolongs the life of your boat like nothing else. ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ THE ORIGINAL DO-IT-YOURSELF KEEL PROTECTOR PROTECT YOUR INVESTMENT Protect Against Abrasive Sand, Rocks, Concrete Ramps and Oyster BedsEliminate Costly RepairsEnjoy the Highest Quality and Superior EngineeringIncrease the Value of Your BoatMade in the USA ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ MEGAWARE KEELGUARD PATENTED ENGINEERING EXPERTS IN PROTECTING YOUR WATERCRAFT Every aspect of the patented Megaware KeelGuard has been developed with boat designers and 3M engineers. Many factors contribute to its success, such as: A precise, abrasive-resistant blend of polymers and urethanes to achieve optimal durability and pliability. Pressure-sensitive 3M adhesive creates strength, while permanently bonding and sealing the Megaware KeelGuard contoured edges to the hull surface. Angled grooves produce hydrodynamic channels, creating air pockets and providing a slicker surface.Machine-tapered ends aid in the reduction of drag or snagging. The perfect combination of these factors makes the Megaware KeelGuard the easiest keel protector to install, providing unparalleled quality and dependability. ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ EASY DO-IT-YOURSELF APPLICATION IN 4 BASIC STEPS 1) ETCH Etch the surface where the KeelGuard is to be installed with the 3M Scotch-Brite pad provided. Any fiberglass mold release agents and wax must be removed. This step is extremely important and must be done thoroughly so the the full bonding qualities of the 3M adhesive can be realized. 2) CLEAN Thoroughly clean the area with isopropyl alcohol using paper towels or a clean rag. Repeat until there is no sign of residue. 3) PRIME Apply a thin coat of the 3M primer provided in the kit. The Primer interacts with the adhesive to create an instant bond that eliminates the need for any additional curing time. 4) APPLY The 3M adhesive has a red protective liner that has been scored down the center to aid in centering of the guard. Pull back the liner and use the patented burnishing tool provided in the kit to apply pressure. You are now finished and ready to enjoy boating. The KeelGuard is a very simple product to install; however, the Application Instructions contained in the package must be STRICTLY followed in order to not compromise the full bonding capabilities of the 3M adhesive. Read more Choose From 11 Good Looking Colors to Match Any Boat. All Colors are UV- Stabilized for True Color that Lasts. Available in 9 Standard Length Kits From 4-12ft. For Extra Protection, Choose a Longer KeelGuard. IMPORTANT! In order to achieve the full bonding capabilities of the 3M adhesive, the Application Instructions contained in the KeelGuard kit must be followed STRICTLY and THOROUGHLY. Any shortcuts or missed steps will compromise and jeopardize the 3M adhesive and will result in product failure. It is important to have a good solid surface before you begin the installation process. The adhesive bond is only as good as the surface to which it is applied to. Severe damage to your boats keel, repairs that have not been done professionally, or any paint or gelcoat that is not properly bonded to the boat's original surface can cause separation of the KeelGuard, taking any loose or improperly prepared paint or gelcoat with it. 3M recommends the adhesive should NOT be applied when the temperature of the boat hull is below 65°F or above 100°F. If possible, bring your boat into a warm shop/garage and give it sufficient time to rise to an acceptable temperature. It is also important that the KeelGuard and the boat hull are at the same temperature during the application process. Do not install the KeelGuard on a hot day. The 3M adhesive will not adhere to the surface of the boat. The KeelGuard should be mounted at least 4-6 in. ABOVE the waterline on the bow, and extend 2-3 feet beyond the lowest point of the keel. Please refer to the chart above for the recommended length of your KeelGuard. A KeelGuard is NOT RECOMMENDED in the following applications: If your trailer is designed with the boat resting on center rollers or a support beam along the keel. This will compromise the adhesive bond resulting in product failure. If you can lower the rollers or raise the side bunks so the boat is not resting on rollers or support beams, then the KeelGuard adhesive bond will not be compromised.On aluminum boats designed with a raised reinforced center rib that protrudes, has large rivets on the center keel, or any hull design where a full surface bond is unachievable. On hulls with a non-standard V-shape, or with aggressive complex angles or curves. This is found on canoes, kayaks, pontoons, catamarans, some boats and modern PWC (personal watercraft) such as Jet Skis.On vessels made from LSE (low surface energy) plastics, such as polypropylene and polyethylene. This is found on Kayaks, canoes and some personal watercraft (PWC) or Jet Skis. The 3M adhesive will not adhere to this kind of material.On boats that use a floating or drive on dock where the entire weight of the boat rests on the keel or where the rear of the guard could snag on the dock during launching. ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ PROTECT YOUR INVESTMENT WITH PREMIER PRODUCTS FROM MEGAWARE A Commitment to Excellence in Product Development and Quality Standards Megaware KeelGuard developed the industry’s first patented, do-it-yourself keel protector in 1992. As a family owned and operated business, Megaware continues to lead the industry in engineering, design and quality with their premier line of products - Keel Guard, Pontoon Guard, Skeg Guard, Skeg Pro, Scuff Buster, FlexStep Pro and BatteryGuard. Through commitment to excellence in product development, quality standards, technology and customer support, Megaware KeelGuard has grown rapidly and is recognized as a worldwide supplier for the smallest fishing boats to the largest coast guard fleets. As new technologies emerge, Megaware will incorporate these advancements to further enhance its line of cutting edge, easy-to-use products. Don’t trust your investment to anything less.
Item Package Dimensions L x W x H: 12.99 x 9.02 x 4.02 inches
Package Weight: 1.97 Kilograms
Item Dimensions LxWxH: 84 x 5 x 0.25 inches
Item Weight: 4 Pounds
Brand Name: MEGAWARE KEELGUARD
Color: Charcoal
Material: Polymer
Number of Items: 1
Manufacturer: Megaware Keelguard
Part Number: 20707
Size: 7-Feet
Date First Available: June 23, 2006
