Search  for anything...
BIGTREETECH

BIGTREETECH BL Touch V3.1 Auto Bed Leveling Sensor Kit for Ender 3 V2/Ender 3/Ender 3 Pro/Ender 3 Max/Ender 5/Pro Compatible with SKR MINI E3 V3.0/Octopus/Manta M4p/5p/8p V4.2.7 3D Printer motherboard

    • Based on 425 reviews
Condition: New
Checking for product changes
$38.99 Why this price?
Save $590.01 was $629.00

Buy Now, Pay Later

As low as $9 / mo
  • – 4-month term
  • – No impact on credit
  • – Instant approval decision
  • – Secure and straightforward checkout

Ready to go? Add this product to your cart and select a plan during checkout. Payment plans are offered through our trusted finance partners Klarna, PayTomorrow, Affirm, Afterpay, Apple Pay, and PayPal. No-credit-needed leasing options through Acima may also be available at checkout.

Learn more about financing & leasing here.

Selected Option

Free shipping on this product

This item is eligible for return within 30 days of receipt

To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

Availability: In Stock.
Fulfilled by Amazon
Arrives Wednesday, Nov 27
Order within 16 hours and 8 minutes
Available payment plans shown during checkout

Style: BLTouch V3.1 Leveling Sensor


Features

  • High Precision The accuracy difference of the table is very small, about 0.005mm.The 3D printer automatically detects the surface of the bed, and automatically adjusts the perfect distance.
  • Wide Application It's suitable for 32-bit V4.2.2 Creality/Ender 3 /Ender 3 V2/Ender 3 MAX/Ender 3 Pro/Ender 3S/Ender 5/Ender 5 Pro/CR-10.
  • Smart Functions Featured with self test, the push pin is operated three times to test when the power is on. The LED light blinks if a problem found on a self-test or on an operation.
  • Warm Notice BLTouch must be installed perpendicular to the ground. If BLTouch push-pin can't be perpendicular to the ground, BLTouch will send wrong signals.

Package Dimensions ‏ : ‎ 4.29 x 3.9 x 0.87 inches; 0.63 Ounces


Item model number ‏ : ‎ DKG000113


Date First Available ‏ : ‎ April 22, 2021


Manufacturer ‏ : ‎ ANTCLABS


Best Sellers Rank: #20,183 in Industrial & Scientific (See Top 100 in Industrial & Scientific) #180 in 3D Printer Accessories


#180 in 3D Printer Accessories:


Customer Reviews: 4.4 4.4 out of 5 stars 425 ratings


Frequently asked questions

If you place your order now, the estimated arrival date for this product is: Wednesday, Nov 27

Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

  • Klarna Financing
  • Affirm Pay in 4
  • Affirm Financing
  • Afterpay Financing
  • PayTomorrow Financing
  • Financing through Apple Pay
Leasing options through Acima may also be available during checkout.

Learn more about financing & leasing here.

Similar Products

Top Amazon Reviews

    • great product, instructions for 32 bit (silent board) are inacurate!
Style: BLTOUCH v3.1 + 2 Types Extension Cable
Review Image by zeeman zeeman
Review Image by zeeman zeeman
Review Image by zeeman zeeman
Review Image by zeeman zeeman
BLtouch is a great product but instructions for 32 bit board need to be updated. I emailed the seller my discoveries who in turn will notify the ANTCSLABS. I have spend many hours trying to figure out this setup, I ended up figuring out that instructions are quite misleading and they would drive you off the wall. first of all, Creality BLtouch kit works fine, as far as hardware installation, but configuration of BLtouch on 4.2.7 motherboard is grossly inaccurate. Here is what I discovered by trial and error and watching bunch of youtube videos, many of them did not quite cover the topic correctly. First of all, you will need an micro SD card to save the settings on 4.2.7 motherboard, there is not much room left on EEPROM once all of the features are enabled and you will need to save them to micro SD card or when you power off your printer all will be lost. You will need to re-calibrate the Z settings again. If you forget to punch in Z offsets if the printer was powered off you will be printing a few millimeters up in air. Don't ask me how I know. /// How to configure BLtouch after the device is physically installed and wired up/// ================================================================== Unplug the USB cable if connected to the computer, this prevents the 3D printers receiving the power to its motherboard. Verify BLTOUCH operation and correct installation ================================================================== Verify that BLtouch is working correctly by moving the nozzle assembly at least 150 mm above the bed. We will issue auto home command and we need some vertical space so that can turn off the printer power if BLtouch is not stopping downward movement when its probe is touched. Via the printer menu select Prepare -> auto home – printer will start the auto home process and the nozzle will start moving down and BLtouch will extend (lower) its probe. As the nozzle assembly is moving down gently touch the BLtouch probe, the nozzle should stop, then resume downward movement. Touch the probe again for the second time and the nozzle will stop moving permanently. That means that BLtouch is wired correctly and it will stop when the probe touches the bed. Please note: Be ready to turn off the printer power if when touching the BLtouch probe the nozzle is still moving down! In that case you need to check the Bltouch for correct wiring to the motherboard. How to calibrate the Z offset ================================================================== Via the printer control knob do the following steps: Select Control Then restore failsafe And store settings. This erases any settings that were previously configured so we start with a blank slate. This is a very important step! If some old Z offsets are still in EEPROM and you start to configure printer you could potentially have the nozzle hit the bed because of old Z offsets were not erased. So, restore the settings to failsafe! note: make sure you have the micro SD card inserted. Auto home the printer ================================================================== select prepare Select Auto home and wait for process to complete Printer will auto home where it thinks the Z axis is. Please note; now there is a few millimeters difference because BLtouch is a few millimeters above the nozzle. This is by design to prevent BLtouch needle to hit the printed object. That is why we have to measure that difference and write it down to be used later. To determine Z offset ================================================================== select Prepare, Then move axis Then move Z Select 1mm and start moving the nozzle down towards the bed When you get close to the bed change to 0.1 mm increments Inset a sheet of A4 paper on print bed (paper is 0.2 mm thick) keep lowering the nozzle via “move Z” slowly with one hand and keep moving the sheet of paper back and forth until there is slight resistance with other hand. You should be able to move the paper back and forth but with slight resistance. Now, stop and write down the value. The value in this image is my value, your value will be different! This will be a negative value somewhere between 2.5 and 4 mm as BLtouch probe is typically that much higher in relationship to the nozzle, and this value varies from one printer to another. This is the value that we will need to input into Z offset in later steps. To prevent accidentally scratching of the bed with the nozzle select prepare Then auto home Configure probe Z offset ================================================================== select control Then bed leveling Then probe Z offset And put the value that you have written down for Z offset that you measured in previous steps. The value will be in negative (minus) so for example, -003.2 mm) The value should be typically between 2.5 and 4 mm with original creality Bltouch bracket. Finally, select store settings to save your Z offset! Exit the menu to the top and then verify that settings are correct for Z offset! Your value should be there! Bed leveling ================================================================== Select control Then Bed leveling Then select level bed The process will probe 9 points Once that is done auto leveling is completed. Modify Cura settings for BLtouch In Cura –select settings -> printer -> manage printers Click on machine settings And add under Start G code: G29 ; (Auto Level / BLtouch mesh) M500 ; save the mesh EEPROM Click close and close again. Do a test print from cura! adjust the Z offset if needed good luck! ... show more
Reviewed in the United States on October 28, 2020 by zeeman zeeman
    • 2nd one was a charm
Style: BLTOUCH v3.1 + 2 Types Extension Cable
This was the second unit i got as the first had to be returned. It was exibiting odd behavior and preventing the printer from completing the homing process during a print. I thoughy i had done something wrong, but alas, i returned it and got another one and it worked flawlessly. It gives me consistent results on bed leveling and mapping my bed surface. Its a set it and forget it type product as once you install and assign and save the gcode, it easy to use. Its a really inexpensive upgrade thag saves alot of headaches of manually leveling the bed, so i definitely recomend it! By the way, the clicking at startup is so satisfying!!🤣🤣 ... show more
Reviewed in the United States on September 1, 2023 by Wazzaa25
    • Great Product - But Watch the Wiring!
Style: BLTOUCH V3.1+1.5m Extension Cable
So, I have an Elegoo Neptune 2S FDM printer. The BLTouch ABL probe is a great addon for what is a fantastic entry-level printer. There are some YouTube reviews of the Neptune that claim using the BLTouch is a waste of time and doesn't necessarily help with leveling the bed. I can attest this is not the case. How you configure the BLTouch in the printer's firmware is very important but, even more important is understanding what you get with this particular kit. I ordered the probe with 1.5 meter extension as the included cable is far too short. The extension is wired incorrectly and will cause the probe to short out if you attempt to use it as is. In order to properly configure the wiring, you'll need to extract the pins from the plug that goes to the BLTOUCH port on the printer's motherboard and switch the 5v and Signal pins. Also, the extension is colored differently than the pigtail that comes with the BLTouch; PAY VERY CLOSE ATTENTION TO WHAT LEADS GO TO THE PINS! Other than that small issue, the unit works well. I recommend increasing the number of points in the mesh to create a higher resolution bed mesh. The default is 3 for a total of 9 probe points. I bumped it up to 6, creating a 36 point mesh. The max is 15, but that seemed like overkill. At 36 points the bed leveling procedure takes about 5 minutes, which doesn't bother me when most of my prints take several hours, or days to complete. Also be aware of the z-offset. In all of the tutorials I used except one, there's no mention of what measurement the probe should be from the bed. It's 3mm, and if you can't shim the probe to get that, you'll need to figure out what the difference is and set that as your z-offset after every auto bed leveling operation. The easiest way to do this is after the auto bed level script runs, the printer will center the hot end to the bed and the screen will allow you to enter the z-offset. Grab your feeler gauge or sheet of paper and add or decrease the offset until you get the proper gap. I've noticed that if you use a feeler gauge, there should be next to no resistance when you slide it under the hot end. With paper, you should feel it drag with a little resistance, similar to how you manage it with the manual bed leveling. Happy printing! ... show more
Reviewed in the United States on January 20, 2022 by iluvmybeamer
    • Good product, bad naming
Style: BLTOUCH v3.1 + 2 Types Extension Cable
Yo. The product works great. My only issue is that the cable is not an extention cable but a replacement cable. Took me a few days to realize as it didn't look like an extention cable. But anyways, the product works great. It didn't originally, which sucks, but after removing the pin and using compressed air it works great. ... show more
Reviewed in the United States on July 31, 2023 by Loaf
    • Awesome, but needs longer extension cables
Style: BLTOUCH v3.1 + 2 Types Extension Cable
If you’re going to install one of these on a cr10s pro v1, you can’t wire this up to the daughter board on the x gantry. You need to wire it up to the main board. So you’ll need to by extra extension cables to get all the way under the base of the printer. Other than that, this works great. Way better than the capacitive/inductive sensors. ... show more
Reviewed in the United States on May 28, 2023 by Matt Pitta

Can't find a product?

Find it on Amazon first, then paste the link below.