Search  for anything...
ANYCUBIC

ANYCUBIC Wash and Cure 3, Upgraded Volume 2 in 1 Wash and Cure Station, with Gooseneck Lights, for Mars Anycubic Photon Mono 4K 2 LCD SLA DLP 3D Printer, Washing Size of 165 x 100 x180 mm

    • Based on 2,979 reviews
Condition: New
Checking for product changes
$129.99 Why this price?
Save $28.98 was $158.97

Buy Now, Pay Later

As low as $21.67 / mo
  • – 6-month term
  • – No impact on credit
  • – Instant approval decision
  • – Secure and straightforward checkout

Ready to go? Add this product to your cart and select a plan during checkout. Payment plans are offered through our trusted finance partners Klarna, PayTomorrow, Affirm, Afterpay, Apple Pay, and PayPal. No-credit-needed leasing options through Acima may also be available at checkout.

Learn more about financing & leasing here.

Selected Option

Free shipping on this product

30-day refund/replacement

To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

Availability: 20 left in stock
Fulfilled by Amazon
Arrives Friday, Jan 24
Order within 17 hours and 54 minutes
Available payment plans shown during checkout

Size: S-Wash & Cure 3.0


Features

  • Larger Size for Upgraded CapacityCompared to Anycubic Wash & Cure 2, Wash and Cure 3 has an impressive 42% increase in cleaning basket capacity, this makes it perfectly tailored for LCD (light-curing) 3D printers with a size of 7.3 inches or less. The volume of the cleaning bucket has also increased to 4L, meeting the cleaning needs of larger and more 3d models
  • Gooseneck light designThe "Innovative Flexicure Gooseneck Light Design" of ANYCUBIC increases the energy value by 30,000uW/cm2 within a 1-3 cm irradiation range, significantly strengthening the curing effect on subtle areas such as the top of models and the hem of garments
  • Dual-layer Design, IPA SavingThe double-layered PP material cleaning basket is designed to support cleaning with defferent platforms. It features two adjustable heights at 100mm and 165mm, providing flexibility to accommodate printing platforms ranging from 5.9 inches to 7.3 inches. This design also maximizes the efficiency of IPA usage
  • Enhanced Curing PowerBy utilizing a new bead arrangement and lens light source, Wash & Cure 3.0 offers a 20%* improvement in curing uniformity over the previous generation 2.0. This results in a more thorough and comprehensive curing of the entire model
  • Quiet and SimpleCleaning and curing dual modes, easily selected with one click; Gooseneck light curing mode can be easily toggled on and off with one click. Adjustable from 1 to 30 minutes at will. After the closed structure design and software optimization, machine can effectively reduce the cleaning, curing noise interference, to create a quieter and more comfortable working environment

Brand: ANYCUBIC


Material: PC+metal


Color: multi-color


Product Dimensions: 30"D x 20"W x 20"H


Item Weight: 0.28 Grams


Product Dimensions: 8.86 x 8.66 x 14.88 inches


Item Weight: 0.01 ounces


Item model number: Wash and Cure 3


Date First Available: January 4, 2020


Manufacturer: ANYCUBIC


Frequently asked questions

If you place your order now, the estimated arrival date for this product is: Friday, Jan 24

Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

  • Klarna Financing
  • Affirm Pay in 4
  • Affirm Financing
  • Afterpay Financing
  • PayTomorrow Financing
  • Financing through Apple Pay
Leasing options through Acima may also be available during checkout.

Learn more about financing & leasing here.

Similar Products

Top Amazon Reviews

    • Good Product.
Size: S-Wash & Cure 3.0
Over all, this is a very good product. However, to cut to the chase, I prefer using an ultrasonic cleaner and a homemade UV curing chamber. Here are a few of the pros, cons, and reasons to back up my preferences. Pros: Simplicity (Two machines in one) Pretty good at washing parts (reason for "Pretty good" explained later) Amazing at curing parts (the UV LEDs are super powerful) Attention to safety (the lid is UV blocking and there is a safety switch that shuts down the machine if the lid is removed) Simple user interface Works with a pretty small amount of cleaning fluid (there is an included bracket that lowers the bed to the surface of the liquid) Cons: Price (see below for further detail) Can't use both the cleaning and curing features simultaneously In all, this is a very useful piece of equipment. However, let's go into further detail on a couple of the points made above. Let's start with my comment that it does a "Pretty good" job at cleaning. Though the cleaning system does a surprisingly decent job at removing excess resin from the surface of the prints, it lacks the penetrating capability of an ultrasonic cleaner. With an ultrasonic cleaner, the part gets cleaned inside and out. This is important because resin printers can't really print infill. This means that either you print with 100% infill (i.e. solid) or no infill (i.e. hollow). Because the ultrasonic cleaner uses, well, ultrasonic waves to clean, these waves can penetrate the walls of the print and clean the inside as well. And finally, let's talk price. Though this machine is pretty good at what it does, I don't think it is worth the $150 price tag (as is the price at the time of the writing of this review). I say this because of the all the other methods of doing the things this machine does (sometimes even better) but at a cheaper price. For example, I can get an ultrasonic cleaner (big enough to put the entire build plate into) for around $80 and a string of UV LEDs for $10. So, with a little DIY (to build the curing chamber) I can have equivalent capability for $60 less. In conclusion, this is an all around good machine. I believe that you can make something better, but, since this is the only all-in-one cure/wash station I can find, I would recommend it to anybody that doesn't want to mess with the DIY side. ... show more
Reviewed in the United States on November 15, 2020 by Noah J
    • The wash and cure station by Anycubic is a MUST!
Size: S-Wash & Cure 3.0
Review Image by michael cangelosi michael cangelosi
Review Image by michael cangelosi michael cangelosi
Review Image by michael cangelosi michael cangelosi
So recently I took the plunge on my first resin printer experience. I had a small background in FDM printers but was looking for higher definition with my prints. After some research I kept hearing about Anycubic being a big contender in the SLA space. I ended up purchasing the Mono X and the wash and cure station as well. The package showed up and upon opening it I first noticed how well the machines were packed. Everything came in perfect condition. The instructions were clear, bright, and very easy to understand. Both wash and cure station and the printer were both set up within a matter of minutes. I followed the instruction and I ready for my first test print. The print went flawlessly. It was a really great first experience in SLA. The test came out in a few hours and I immediately took advantage of the wash station. This was quickly and obviously money well spent. The print came out clean in just a few minutes and after a few more min of curing I was done. I couldn’t believe how simple it really was. The following day I decided to put the printer to the rest. I printed a full build plate of a highly detailed model and was blown away but how well the mono 4k screen captured the details. As a full time artist this new tool will change everything and will be instrumental in bringing my digital sculptures to life! I plan on doing a full and immersive review of both machines on my YouTube Channel which can be found at BogleArts on YT. I’m attaching pics of my printer set up, the prints I’ve made so far, and some tools I found to help make printing a little easier. The customer service with Anycubic also deserves to be mentioned. Between the customer service and the Mono X community online this is a particularly great printer choice for anyone looking to get into SLA printer to ready to step it up from a small printer to A medium sized machine with a 4k Mono Screen. I plan on updating this review every few months to keep others informed on my printing journey. Stay tuned. ... show more
Reviewed in the United States on March 21, 2021 by michael cangelosi michael cangelosi

Can't find a product?

Find it on Amazon first, then paste the link below.