Search  for anything...
AZZUNO

AZZUNO Aluminum 250Amp MIG Welder,6 in 1 Gas MIG/Gasless Flux Core/Stick/Lift TIG/Spot Welding/Spool Gun Compatible Welding Machine 110V/220V Large LED Display Multi Process Welder

    • Based on 752 reviews
Condition: New
Checking for product changes
$369.99 Why this price?
Save $15.99 was $385.98

Buy Now, Pay Later

As low as / mo
  • – Up to 36-month term if approved
  • – No impact on credit
  • – Instant approval decision
  • – Secure and straightforward checkout

Ready to go? Add this product to your cart and select a plan during checkout. Payment plans are offered through our trusted finance partners Klarna, PayTomorrow, Affirm, Afterpay, Apple Pay, and PayPal. No-credit-needed leasing options through Acima may also be available at checkout.

Learn more about financing & leasing here.

Selected Option

Free shipping on this product

Returnable until Jan 31, 2025

To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

Availability: Only 5 left in stock, order soon!
Fulfilled by Amazon
Arrives Tuesday, Feb 25
Order within 15 hours and 52 minutes
Available payment plans shown during checkout

Style: MIG-250A Aluminum


Features

  • 6 in 1 Welding Machine:The multifunction welding machine included Gas/Solid Wire MIG, Gasless Flux Core MIG, Stick/MMA, Spot welding, Lift TIG, spool gun comptatible (tig gun and spool gun not included,WP-17V-35,LBT150).
  • Synergic or Manual Control:Digital control to automatically match recommended current and wire feed speed when selecting wire diameter and gas material. Very easy for beginners.Also you could set the welding current according to your personal welding habit, if you are a experienced welder.
  • Weld Copper and Aluminum:AZZUNO 250A MIG welder can weld various of metals,It can not only weld stainless steel,alloy steel,iron but also can weld copper and aluminum.It has two ways to weld aluminum, to install the teflon wire feed tube or use spool gun.
  • Suitable for Various Welding Wire:.023/.030/.035 solid wire, .030/.035 flux core wire, .035/.040/.045 aluminum wire, .035/.040 copper wire.Suitable for all kinds of welding requirements
  • Powerful And Safe Machine:This 250A Welding machine can weld mild up to 10.0mm plate,equipped with overload / over-voltage/over-current/overheating system,feel free to use,its very safe.

Manufacturer: ‎AZZUNO


Part Number: ‎A-2


Item Weight: ‎23.8 pounds


Product Dimensions: ‎0.19 x 0.1 x 0.13 inches


Country of Origin: ‎China


Item model number: ‎MIG250F


Color: ‎Blue


Style: ‎MIG-250A Aluminum


Batteries Included?: ‎No


Batteries Required?: ‎No


Date First Available: April 17, 2023


Frequently asked questions

If you place your order now, the estimated arrival date for this product is: Tuesday, Feb 25

Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

  • Klarna Financing
  • Affirm Pay in 4
  • Affirm Financing
  • Afterpay Financing
  • PayTomorrow Financing
  • Financing through Apple Pay
Leasing options through Acima may also be available during checkout.

Learn more about financing & leasing here.

Similar Products

Top Amazon Reviews

    • Great quality and performance
Style: MIG-200A
I was skeptical of the quality of a machine that was offered at this price point. I expected tripped breakers, poor weld results, duty cycle not living up to stated time. None of these fears were warranted. My first welds with each process were expected to be mediocre and I was expecting a dialing in to achieve good results. That was not the case. Every first weld turned out beautiful. The synergy feature has been well designed and as others have said, allows one to depend on the machine to set the wire speed for you. It’s a very nice looking machine and was made with quality materials. All the wire drive is metal construction and feeds steady and decisively. I’m happy with the machine and hope it lives a long and healthy life! Updated review!!! I’ve used industrial quality welders for decades. This Azzuno 200F multi-process welder has amazed me with its capabilities. I originally purchased this machine on may 2nd of 2024. I’ve welded the most challenging of situations with it as a test of what it was capable of. I haven’t found anything I haven’t been able to get a high quality level of penetration on while getting a visual that anyone would be proud to say they welded. I’ve gone above and beyond in thickness, 1” steel and the Azzuno had the ability to provide a buttery smooth weld that penetrated deeply using flux core wire. I must say I was surprised. The machine performs equally well on 110V as it does on 220v. I’ve most often welded with gas shielding. The small and lightweight Lincoln welders that I often used did nothing more than stick pieces together. The welds out in the field never lived up to the machines in the weld shop. I expected the same with the Azzuno but I was wrong. I see no difference in the machines weld quality whether it’s 110 or 220. Stick welding capability was equally impressive. Silky smooth 7018 runs were the norm. 7018 electrodes are often overlooked because they are referred to as low penetration rods, I had good penetration and quality with this machine. I’m also impressed with the duty cycle of this machine. 110V flux core welding has a duty cycle that most home shops will never have issue with. 80% duty cycle is a rarity with these smaller wire welders. I’ve recently seen a machine that had a 20% duty cycle. The fan quality on this machine must really be sufficient to provide the needed cooling. I welded 220V stick at 130 amps for quite a while and expected the fan to run longer than usual after shutting down the machine, it ran for the usual amount of time! Surprise Surprise. So I feel very confident with the Azzuno 200F and would recommend the welder to anyone! ... show more
Reviewed in the United States on June 7, 2024 by michael clim
    • Excellent value
Style: MIG-200A
Shockingly great product. I was amazed by how well this machine works. Product is well built and very easy to set up. I will say the instructions are non existent, but it really isn’t rocket science. Just have to play with the settings a little, as you would with any machine anyway. I do wish there was a setting chart to get you started. This is the perfect machine for a hobbiest like me. I researched every product on the market and this was the best bang for the buck. Do not hesitate. I would but this again in a heartbeat. I have not used gas (yet), have only done stick and flux core so far, very pleased with the results. This is exactly the machine I was looking for. There was an item missing, but the seller was fantastic, they replied and even called very quickly and resolved the issue on the spot. Excellent customer service. As good and any I have had on Amazon. ... show more
Reviewed in the United States on June 18, 2023 by Tom Ryan
    • Surprisingly good
Style: MIG-200A
I bought this on a whim - needed a 200A MIG welder for a project (I mostly do TIG) and stumbled on this here at Amazon. Great price to be sure. Surprisingly, this thing works great! I have no idea how long it is going to hold up, but unlike cheap import plasma cutters, this thing seems very well constructed in terms of fit and finish, has a good solid stable arc, feeds smoothly... I'm impressed considering the price. PROS: - Fired up right out of the box with most things obvious to anyone who's done MIG before. - Does Flux core as well as MIG - Handles 10# spools of wire - Has some presets for different size wire and can handle .025", .030", .035" and .045". Comes with all necessary drive wheels for both solid and flux-core wire. - The torch is far better than I expected with a Euro-style connector. - The machine can also do lift-TIG and stick welding. Stick stinger supplied but no TIG torch. CONS: (some pretty big ones unfortunately) - The manual is utter crap - literally one of the worst manuals I've encountered. There are features that are in the machine that are completely unexplained or referenced. Presets aren't mentioned at all nor is the behavior of various other features like Inductance, Arc Force and others. No details or explanations whatsoever - just a comment that the voltage knob controls inductance when in preset mode and the wire feed knob controls arc force when stick welding. Literally a ridiculous manual. - As far as I can tell, there is no website, no tech support, no phone #, no nuthin' - although they do purport to provide a 1 year warranty. - wire feed rate is in METERS PER MINUTE! No way to change it either. If you're in the US, you'll need to divide inches/minute by 39.37 to get the proper feed speed. - Gas inlet is a 1/4" hose barb instead of a standard flare gas fitting. You'll need to make an adapter. There are multiple Youtube videos that describe it - older Everlast machines had the same issue. - Control panel consists of rotary encoders and membrane buttons. OK I suppose in general but I've never been impressed with the long term reliability of membrane keypads. This may be just me being picky, but that kind of keypad is on my washing machine and it is wearing out after 10 years. YMMV Again, I can't stress enough my caution concerning the apparent lack of any support website whatsoever. I'm not sad at all about buying this - I am a relatively sophisticated buyer. I do think this would be a great machine for a hobbyist/home shop kind of thing or even light commercial work. If the documentation and tech support was there I would whole-heartedly recommend to a beginner ... show more
Reviewed in the United States on March 26, 2023 by Warren
    • Couldn't be happier
Style: MIG-200A
I mostly weld light stock and it does great. I have an old CJ2A and this is perfect for welding in new steel panels. Its small and easy to move welder in one hand, small flux gas tank in the other.
Reviewed in the United States on October 17, 2024 by MH

Can't find a product?

Find it on Amazon first, then paste the link below.