Search  for anything...
WAHUDA TOOLS

Jointer - 8-inch Benchtop Wood Jointer, Spiral Cutterhead Portable Jointer, Cast Iron Tables w/Pull Out Extensions, 4-Sided Carbide Tips & 10amp Motor, Woodworking Tools (50180CC-WHD)

    • Based on 476 reviews
Condition: New
Checking for product changes
$549.99 Why this price?
Save $249.01 was $799.00

Buy Now, Pay Later

As low as / mo
  • – Up to 36-month term with PayTomorrow
  • – No impact on credit
  • – Instant approval decision
  • – Secure and straightforward checkout

Ready to go? Add this product to your cart and select a plan during checkout. Payment plans are offered through our trusted finance partners Klarna, PayTomorrow, Affirm, Afterpay, Apple Pay, and PayPal. No-credit-needed leasing options through Acima may also be available at checkout.

Learn more about financing & leasing here.

Selected Option

Free shipping on this product
This item's return window has been extended for the holiday season: Returnable until Jan 31, 2025

To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

Availability: In Stock.
Fulfilled by Wahuda Tools
Arrives Tuesday, Nov 19
Order within 1 hour and 46 seconds
Available payment plans shown during checkout

Size: 8 inch


Features

  • No More Cupped Woods. Create perfectly flat surfaces and edges quickly and hassle-free with the Wahuda Jointers. Experience smoother and accurate cuts even on tough or figured woods w/ Wahuda Tools.
  • Cutting-Edge Sharpness. Our spiral cutterhead has 4-sided carbide inserts for sharper and quieter cutting precision. The standard blade size also allows for a cost-effective and simple replacement.
  • Capable Steady Performance. Wahuda Jointers are powered with a 120V motor with a fixed 12,000 RPM. They are fully capable of handling edging, jointing, flattening, or tapering no matter the surface!
  • Solid Built For Your Convenience. Our adjustable and expandable cast iron tables enhance stability even when working on longer, larger pieces, with a fence that tilts from 90 &135 for versatility.
  • Perfect For Job Sites Or Small Shops. Depending on your needs or your shops size, Wahuda Tools have 6, 8, and 10-inch wood jointers that will do the job right. Theyre conveniently movable, too!

Manufacturer: ‎Wahuda Tools


Part Number: ‎50110CC-WHD


Item Weight: ‎49.9 pounds


Product Dimensions: ‎34 x 14 x 13 inches


Country of Origin: ‎Taiwan


Size: ‎8 inch


Color: ‎Black


Material: ‎Steel / Cast Iron


Batteries Required?: ‎No


Date First Available: February 27, 2020


Frequently asked questions

If you place your order now, the estimated arrival date for this product is: Tuesday, Nov 19

Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

  • Klarna Financing
  • Affirm Pay in 4
  • Affirm Financing
  • Afterpay Financing
  • PayTomorrow Financing
  • Financing through Apple Pay
Leasing options through Acima may also be available during checkout.

Learn more about financing & leasing here.

Similar Products

Top Amazon Reviews

    • Needs Setup but amazing once dialed in
Size: 10 inch
This was my first jointer. The instructions and assembly was pretty straight forward. Out of the box it was pretty close to being flat but not quite there. Probably took me about three times of resetting it and doing test cuts but once I learned the system was able to get the outfeed table within .002 of the top of the blades with feeler gauges, and the infeed table coplaner. After that the cuts with this are amazing and accurate it has really sped up my work flow and is worth the price. Everything is heavy and well built I would expect it to last. Looks great and functionally I’m happy with the results and can face and edge joint boards properly I mainly build furniture. ... show more
Reviewed in the United States on October 10, 2024 by Otis Bailey
    • Review of the Wahuda 8" Jointer
Size: 8 inch
Review Image by FJFs-Son2 FJFs-Son2
Summary: I would recommend the Wahuda 8" jointer. Great for small shops, well priced, has features that compete well with jointers of similar size and excellent quick customer response and service. In spite of a couple of issues that I discuss in the "Detail" description, I rate this product with high marks, especially given the customer support and excellent performance. I am very pleased with this jointer and glad I made the decision to replace my 6" Delta Jointer of comparable size. Detail: I purchased the Wahuda 8" jointer from Amazon. After assembling it, I noticed that the head had a defect that appeared as a lumpy piece of aluminum. I contacted Wahuda via e-mail. After several e-mail exchanges, it was decided that the head indeed was defective and that Wahuda would send a new unit to me. They also instructed me to send back the defective unit at my earliest convenience. They provided a UPS label - so no charge for returning the unit directly to Wahuda, I decided to wait to receive the new jointer before sending the damaged one back. The replacement jointer came in good condition. I assembled it, aligned it, had to rotate a couple of head cutters (more on this below) and it works wonderfully. I repacked the damaged unit and hauled it to the nearest UPS store. Comment on customer service: - my e-mails were quickly answered on the same day I sent them. Customer support is excellent! I bought the Wahuda jointer to replace an older 6" bench Delta jointer. The reasons I decided on the Wahuda: - steel infeed and outfeed tables, not aluminum like their competitors. - the infeed and outfeed tables are manually leveled (see comments below) - the head uses sixteen 4-sided carbide cutters, not 2-sided high-speed steel cutters like other jointers of similar size. Cutters are 15mm X 15mm X 2.5mm x 30 degrees. These dimensions are not in the manual. Wahuda provided them to me via e-mail. I wanted to know this before making a decision, knowing that the cutters are available from other manufacturers as well as Wahuda. - there is no leveling of the head or cutters required. The Delta jointer uses steel blades that must be leveled to the outfeed table. - profile is similar to the 6" Delta jointer. I placed it on the same wheelable cabinet as what the 6" jointer was mounted on. What I like about the Wahuda jointer at this early stage of usage: - No snipe! - Quieter than the delta jointer (but ear protection is still a must) - The head does not bog down compared to the Delta. It will slow slightly, but it feels like a smooth cut - easy to move evenly as the wood is pushed. - I cut between 4 to 5-inch wide hard maple, walnut, bloodwood and cherry with excellent results but only after rotating two cutters. I noticed a couple of stripes on the boards. The stripes were due to two cutters that had very shallow nicks. The nicks lined up with the stripes on the boards. I identified the nicks by carefully running a finger nail over the edge of the cutter and I could feel the nick. I verified this with a microscope. The nick on one cutter was 0.3 mm wide, the other about 0.25 mm wide. The nick depths were about 0.1 mm with indentation at the edge of less than 0.1 mm. I rotated the two cutters and the striping is gone. Before and after the cutters were replaced, I jointed two 14" long x 5" wide hard maple (i.e., with and without the striping). Placing the boards together required some force to separate them, only possible when each are flattened with good quality. A bit disappointing to have discovered the defective cutters on an initial cut, but not an issue once fixed. Comments: - Adjusting the outfeed and infeed tables: The most time-consuming part of putting the Wahuda jointer together was adjusting the outfeed and infeed tables. I found that for both units I received, leveling was necessary. It took me two hours to level the tables on either unit. This is an iterative process. As the tables get closer to level, the process must be repeated. I've worked on many woodworking power tools and in my opinion, this amount of time is not unusual when it comes to attempting anything having to do with alignment. Once aligned, the reward was excellent results. As the tables come closer into alignment, a fraction of a turn on the height adjustment set screws is all that is needed (not full nor even quarter turns!). A detailed explanation of the adjustment process is at the end of this review. Cleaning the cutters: The manual states that there may be oil residue on the cutters and if so, the cutters must be removed and cleaned. The jointer is shipped with the tables oiled and covered with a plastic sheet. Both the head and the cutters on the jointer I received had quite a bit of oil on them. I removed the cutters and cleaned the oil from the head and the cutters. Extension arms: The extension arms may be used when jointing boards that go beyond the table. I've seen reviews commenting on the difficulty of moving the extension bars. I did not have this problem on both of the jointers I received. There are four screws used to release/adjust play on the extension slider bars. One screw with a knurled knob is used to secure the position of the extension. This screw must be loosened to allow the extension arm to glide smoothly. There are three nylon set screws recessed at the end of each table on the top side and one on the front side. The manual doesn't mention these, and they are helpful in removing any play there may be in sliding the extension back and forth. These must be adjusted so that they do not cause resistance to moving the extensions. The Fence: There are three main pieces to the fence: The fence itself, a right-angle bracket that attaches to the jointer body and a bracket that attaches to the fence and the right-angle bracket that allows sliding the fence into a desired position. The fence and these brackets are made of aluminum. There are two screw-handles: one to lock the fence into a desire position over the tables, the other to lock the fence angle. The handles are a hard plastic-like material. This is an identical arrangement compared to my Delta jointer. There are also two screws useful in adjusting the left-to-right tilt of the fence so that it sits evenly above the table. Regarding the angle of the fence to the table: I had no difficulty aligning the fence to 90 degrees relative to the tables (it was factory set), nor did the fence shift after use - just as with my Delta jointer. Adjusting the tables: The outfeed table is first leveled relative to two of the sixteen carbide cutters - one closest to the fence, the other closest to the front. There are four mounting bolts (positions) on each of the tables. There are also a pair of set-screws on each side of a bolt. I've removed both tables to understand the arrangement of the table-tops and their adjustment set screws and hex bolts. The picture attached is a rough drawing of how the hex bolt and set screws are arranged. So, for each table, there are eight set screws and four bolts. Leveling takes place by slightly loosening the four mounting bolts of a table. The set screws are used to lower or raise the table in the vicinity of the loosened bolt. One set screw is adjusted to get the table at the desired height, the other set screw is adjusted (by feel) to the level same level of the first set screw so that it just touches the support below the table. The other three mounting positions are similarly adjusted. The outfeed table is adjusted so that when a level is placed over the inner (or outer) cutter, the level just touches the cutter (checked by rotating the head back and forth). The head is moved back and forth from the front by placing a thin rod through the hole in the header shaft (I used an Allen wrench to do this). The infeed table is adjusted after completing the outfeed table. The instruction manual states bringing the infeed table to the height that is level with the outfeed table (nominally the "0" position on the level indicator). Leveling is accomplished with the aid of a high quality straight edge. I bought a new 24" level for this. The trick is to obtain even-level so that both tables are at the same height at the "0" position. After leveling the infeed table with respect to the outfeed table, I found that a test cut of four passes resulted in an uneven cross-sectional cut. I discovered that as a result of lowering the infeed table, the table was slightly tilted. I decided to re-level the infeed table at a position slightly lowered from the outfeed table. I used a disk from a hard drive - these are very well machined to be flat (fractions of a thousandth of an inch). I straddled the level - some of it on the outfeed table, some on the infeed table. I placed the disk under the level on the infeed table and raised the table until the level just touched the disk (on the side that was highest). I then shifted to the side where the inner table was lower and adjusted the set screws to raise the table so the disk just touched the level. Iteratively, back-and-forth. Test cuts now worked at various infeed table heights with an even cross-sectional cut! ... show more
Reviewed in the United States on March 31, 2022 by FJFs-Son2 FJFs-Son2
    • Great service!
Size: 8 inch
EDIT 2: Well I gotta say, Wahuda support came through. Doug over there sent me an entire new machine which just arrived and it seems to work great! He included a postage-paid return label and the first one is going back. It was a frustrating month trying to get that first one to work but you know, stuff happens and I gotta hand it to them, they stuck with me till the problem was fixed. Recommend! EDIT 1: Wahuda support got back to me. It looks as though the issue is a dip in the tables that's causing the problem. They're sending a replacement. Will update further once that happens. Hopefully that will fix the problem. I really wanted to like this jointer. I'll get to the dealbreaker first: the infeed and outfeed tables are a nightmare to try and level. Maybe someone with greater skill than I can pull it off but I've been trying for a month and I just can't get it to work right. I finally gave up...3 days past the return window. I emailed Wahuda support and not only haven't gotten a reply, I didn't even get an acknowledgment that my email got there. (My email outbox says it did.) I've watched scads of setup vids, operational tips, etc. I am absolutely, definitively doing everything right. There's a lot to like about it, the cutter is awesome, it's pretty quiet, the fence is square but if you can't make a jointer do what it's supposed to do then none of that matters—hence the one star. Also, if you're jointing long-ish boards like I do for my guitar necks, the table's too short and the extensions don't really help much. Live and learn. This is going on Craigslist and I'm going to spend the money for a more pro machine. ... show more
Reviewed in the United States on May 16, 2023 by Amazon Customer
    • Great jointer.
Size: 10 inch
Just received my jointer a couple of days ago. I’ve already used it on a couple of pieces of reclaimed lumber. Easy to calibrate and get ready for use and seems to work exceedingly well!
Reviewed in the United States on September 12, 2024 by Stephan Coffman
    • Great product and excellent customer service
Size: 10 inch
I purchased the 10" benchtop jointer because 1. i have a tiny shop and 2. The online reviews and videos of this brand of jointer a pretty good. The box arrived a little damaged but its UPS it happens, unboxing there was a damaged part i emailed customer support at wahuda and the next morning i got a confirmation my replacement part is on the way no arguing or fuss a simple email your part is on the way - AWESOME. Assembly was super fast and easy. Calibration: here is where it gets a little sticky, because the box had been dropped or something durring transport the entire machine needed calibrated. The directions on calibrating the infeed and outfeed tables could be made a little clearer, luckly there is videos online to help. The calibration took several hours....but once dialed in this jointer works like a dream. While the calibration was tedious and kinda sucked the end result is well worth the effort. Very highly recommend. ... show more
Reviewed in the United States on November 2, 2023 by Jason

Can't find a product?

Find it on Amazon first, then paste the link below.