Search  for anything...
BRILLIANCE LASER INKS

Liquid Ready Laser Marking Powder-"Brilliance Laser Inks" -BLI101MBLIQ120- Black Laser Ink for Metals Marking with CO2/Fiber/YAG (120 ml, Black)

    • Based on 197 reviews
Condition: New
Checking for product changes
$31.70 Why this price?
Save $19.95 was $51.65

Buy Now, Pay Later

As low as $7 / mo
  • – 4-month term
  • – No impact on credit
  • – Instant approval decision
  • – Secure and straightforward checkout

Ready to go? Add this product to your cart and select a plan during checkout. Payment plans are offered through our trusted finance partners Klarna, PayTomorrow, Affirm, Afterpay, Apple Pay, and PayPal. No-credit-needed leasing options through Acima may also be available at checkout.

Learn more about financing & leasing here.

Free shipping on this product

This item is eligible for return within 30 days of receipt

To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

Availability: In Stock.
Fulfilled by Amazon
Arrives Thursday, Nov 28
Order within 19 hours and 59 minutes
Available payment plans shown during checkout

Features

  • Metal Marking Liquid Ready Powder: Introducing Brilliance Laser Inks, the game-changer in laser printing. Our innovative formula allows you to create striking, long-lasting black designs on a wide range of metals. With compatibility CO2 (25 Watt minimum), FIBER/YAG (10 Watt), and DIODE (10 Watt) lasers, we've got you covered. Experience the power of Brilliance Laser Inks and take your printing to the next level
  • Universal Metal Marking: Discover the versatility of our product, which is compatible with Aluminum, Stainless Steel, Brass, Copper, Pewter, and more. Disclaimer: results may vary depending on different metal grades, laser types and laser settings.
  • Introducing Revolutionary Technology: Conveniently pre-measured quantity of powder is provided in the container. Simply add denatured alcohol or a similar substance up to the second arrow mark. Thoroughly mix or shake the contents. Ensure thorough mixing of the powder with alcohol by using the included foam brush. Ensure a thin, even coat by moving from left to right, making sure the surface is not visible through the coating.
  • Fast Drying: The rapid-drying feature ensures complete drying in just a few minutes. For even faster results, use a heat gun or hair dryer to dry within seconds. Rest assured, our product will not blister up with high heat like others
  • Easy Clean Up: Introducing the industry's most innovative and easy-to-use product for removing excess laser marking on metals. Simply rinse or wipe away the markings to reveal a durable and intricate design with fine lines
  • Free Tech Support: Get lifetime technical support for free with our USA toll-free number. Whether you prefer chatting or emailing, we'll make sure you're satisfied with our product and customer service
  • Satisfaction Guarantee: Get 100% satisfaction through our shipping, return, and refund policy. If you have any issues with our laser marking products, please reach out to us and we will be happy to assist you

Brand: Brilliance Laser Inks


Ink Color: Black


Package Information: Bottle


Paint Type: Spray


Item Volume: 120 Milliliters


Manufacturer: ‎Brilliance Laser Inks


Brand: ‎Brilliance Laser Inks


Item Weight: ‎2.11 ounces


Package Dimensions: ‎8.66 x 4.53 x 3.07 inches


Is Discontinued By Manufacturer: ‎No


Color: ‎Black


Number of Items: ‎1


Size: ‎120 ml


Ink Color: ‎Black


Manufacturer Part Number: ‎BLI101MBLIQ


Date First Available: December 30, 2018


Frequently asked questions

If you place your order now, the estimated arrival date for this product is: Thursday, Nov 28

Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

  • Klarna Financing
  • Affirm Pay in 4
  • Affirm Financing
  • Afterpay Financing
  • PayTomorrow Financing
  • Financing through Apple Pay
Leasing options through Acima may also be available during checkout.

Learn more about financing & leasing here.

Similar Products

Top Amazon Reviews

    • Denatured Alcohol banned in California since 2019
Instructions sound simple: Just add denatured alcohol. Problem is that I live in California and after receiving this discovered that California Air Resources Board (CARB) banned denatured alcohol in 2019. Since I had a project due that day, I tried it with Isopropyl Alcohol 91% instead. This seems to work just fine. The material smoothly mixed and went on smoothly. I think it might have dried a little more slowly than expected - but its also good to note that you don't want a very thick layer - I tried just enough to be opaque. My results on 0.081" thick aluminum disks was pretty good. I used a Glowforge set at 500 speed and 100 power doing an engrave and got a nice opaque black covering that seems pretty hard. If scrubbed hard and for a while, it does come off a little, but seemed pretty sturdy. I also tried "Score" at the same settings and got a nice thin line that was also pretty sturdy, but I considered too faint for my purposes. One hint - this material after application is just a soft powder that isn't really adhered to the surface. Don't handle or touch it or stack material or it will come off. I had 24 disks to do and I painted it on them all and let them dry, then stacked them up, took to the laser when I started laying them out, many had missing sections of the material where it had stuck on the bottom of the neighboring piece. So, for the next batch, I just laid them out in the laser bed and painted them there - it only takes a few minutes to dry and the color gets lighter as that happens, so you can spot any wet spots. Be sure to ventilate well (leave the lid open) so those volatile fumes are clear before operating the LASER! ... show more
Reviewed in the United States on April 27, 2022 by Ross Heitkamp
    • Works as promised
This worked well in my Glowforge engraver
Reviewed in the United States on May 14, 2023 by Ross M.
    • meh
Did ok on a Stainless-steel spoon i tested it on. Barely touched a nickle plated challenge coin without slowing my 80w CO2 to a rawl at the highest power still looked bad. Currently trying to find a sweet spot on Aluminum blanks, but the markings keep coming off with just a bit of scratching. I dunno. It's a good chunk of change for a 'meh' result. My UV Xtool laser head can do this all day long with no coating at all, just slower. I'm just not impressed. ... show more
Reviewed in the United States on October 9, 2023 by David L
    • Excellent product. Did the job.
Review Image by Catherine Catherine
I needed to brand 500 stainless rounds with our laser engraver, and this worked very well. Opted to use a small detail paintbrush instead of the included foam brush, as I was concerned about the volume to spread across all 500 pieces. (We ended up with plenty of extra) I used a 40W engraver at 95% power and 450mm per second engraving speed. It's important to make sure the layer you paint on it opaque! If it doesn't block all the metal color from showing through the engraving will rub off. Directions for mixing were simple. Add denatured alcohol to the line and mix/shake. I found that just shaking was easiest. Denatured alcohol is easily found in the painting section of most department or hardware stores. If you accidentally add too much, it's fine, as you'll just need to do an extra coat or let some evaporate. ... show more
Reviewed in the United States on December 30, 2020 by Catherine Catherine
    • Ortur Laser Master 2 20w
FYI...yes I read the description and yes it said for co2 and fiber and yes I figured I would try it with my 20w diode laser anyway. Wasn't sure how to rate it, because it did etch my aluminum water bottle. (VERY faintly) In a nutshell, if you want a black or deep black etching from a diode laser, this is not the product you are looking for. ... show more
Reviewed in the United States on April 23, 2023 by Amazon Customer
    • It doesn't come with the brush like it says it does
The product works well it's just it didn't come with the brush like it said it did that's the only issue I had change the label where it says brush not included
Reviewed in the United States on March 31, 2023 by Brian Williams
    • Decomisado por aduanas en el Aeropuerto
No pude probarlo, aduanas lo decomisó porque no pasó la prueba en el control aduanal probablemente si lo hubiese enviado por otra vía y no en maleta pasa bien.
Reviewed in the United States on March 2, 2023 by Larissa
    • Third of a bottle is all you get!
Review Image by Tim Tim
Unless I am missing something, you get about a third of a bottle (see picture) of liquid once it is mixed together. So $30 for a third of a bottle hardly seems appropriate. Like they couldn't have provided enough powder so you could fill the entire bottle up. I saw spray cans for around $50 that I am sure will last a ton longer than this stuff! ... show more
Reviewed in the United States on August 3, 2023 by Tim Tim

Can't find a product?

Find it on Amazon first, then paste the link below.