Search  for anything...

Pump 500W DC 48V Solar Water Pumps, Max head 393ft,7.9GPM Flow,3 inch Solar deep well submersible Pumps with MPPT controller float switch kits for home or farm

  • Based on 28 reviews
Condition: New
Checking for product changes
$579.99 Why this price?

Buy Now, Pay Later


As low as / mo
  • – Up to 36-month term with PayTomorrow
  • – No impact on credit
  • – Instant approval decision
  • – Secure and straightforward checkout

Ready to go? Add this product to your cart and select a plan during checkout. Payment plans are offered through our trusted finance partners Klarna, PayTomorrow, Affirm, Afterpay, Apple Pay, and PayPal. No-credit-needed leasing options through Acima may also be available at checkout.

Learn more about financing & leasing here.

Selected Option

Free shipping on this product

30-day refund/replacement

To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.

To initiate a return, please visit our Returns Center.

View our full returns policy here.


Availability: 19 left in stock
Fulfilled by Amazon

Arrives Tuesday, Nov 26
Order within 4 hours and 51 minutes
Available payment plans shown during checkout

Size: 500W-393ft


Features

  • [Specification]: JENENSERIES Solar Water Pump 48V DC,3 Inch Dia,9.8ft extension cable, Max head 120m,1.8m3/h Flow, PV open circuit voltage 42-100V with MPPT controller for farm, Garden, home, pool, Industrial
  • [Solar Energy]: The 304 stainless steel deep well submersible pump can be supported by batteries if you need the flexibility of pumping on demand at any time. Moreover, it is suggested to be connected with solar panel, which is high energy conversion rate, environmental-friendly and lower consumption.
  • [Intelligent Water Shortage Sensers]: This solar water pump has an intelligent water shortage sensor, so it has an intelligent water shortage protection function. When there is no water in the well, the pump will automatically stop working.
  • [Pump Motor]:The solar pump use NSK bearing with permanent magnet brushless synchronous motor. So the pump has sufficient power and high efficiency.
  • [High-quality controller]: The solar water pump controller utilizing MPPT technology to ensure maximum flow is delivered under all light conditions. It also protects the submersible pump from frequent start up in low light conditions, overheating & running dry with LED display to view working various condition. NOTE:If you have any questions after receiving the pump, please contact the seller in time, we will be responsible for our products.

Brand: JENENSERIES


Color: Black


Material: Stainless Steel


Style: Submersible,Solar Water


Product Dimensions: 3"L x 3"W x 16.4"H


Power Source: Solar Powered


Item Weight: 18 Pounds


Maximum Flow Rate: 7.9 Gallons Per Minute


Maximum Lifting Height: 393 Feet


Voltage: 48 Volts


Brand: ‎JENENSERIES


Color: ‎Black


Material: ‎Stainless Steel


Style: ‎Submersible,Solar Water


Product Dimensions: ‎3"L x 3"W x 16.4"H


Power Source: ‎Solar Powered


Item Weight: ‎18 Pounds


Maximum Flow Rate: ‎7.9 Gallons Per Minute


Maximum Lifting Height: ‎393 Feet


Voltage: ‎48 Volts


Manufacturer: ‎JENENSERIES


UPC: ‎745499001380


Item Weight: ‎18 pounds


Size: ‎500W-393ft


Batteries Included?: ‎No


Batteries Required?: ‎No


Date First Available: December 29, 2020


Frequently asked questions

If you place your order now, the estimated arrival date for this product is: Tuesday, Nov 26

Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

  • Klarna Financing
  • Affirm Pay in 4
  • Affirm Financing
  • Afterpay Financing
  • PayTomorrow Financing
  • Financing through Apple Pay
Leasing options through Acima may also be available during checkout.

Learn more about financing & leasing here.

Top Amazon Reviews


  • Easy to setup and better than expected performance
The media could not be loaded. I have to say I was skeptical at first of buying this and even more skeptical when I received it because of how small and lightweight the pump was. I figured there was no way this little pump is gonna produce any legitimate amount of water out of a 130ft well. I was wrong but more on that later. Setup: For me the setup was fairly easy, I know the well will produce more than I can pump and I am pumping into a 1 acre pond rather than a tank so I did not bother with any of the level switches that turn the pump on and off based on well or tank level. It was just splice the wires together (I used a well splice kit from Menards), hook up the drop pipe (I used 1” poly pipe for potable water usage), connect a safety rope and drop it in the well casing and hooked it up to the solar panels. The only hiccup I had here which maybe the manufacturer can correct is that the tags on the pump cable (w, v, u) were not correct and made the pump spin backwards which results in the impeller unthreading and popping out. We switched one set of the wires at the controller and pushed the impeller back in and then when the pump started it re threads the impeller back in as it is spinning the correct way. I would recommend putting the pump in a 5 gallon bucket and starting it up briefly to ensure it is spinning correctly and pumping water. This would have saved us from having to pull the pump back out of the well after the initial startup attempt. Regardless it didn’t damage anything or cause too much grief so I am not docking it any stars for that. Performance: This little pump has exceeded my expectations. The pump curve they supplied seems to be accurate and maybe even a bit conservative in how much flow you should expect. The water level in my well is right at 130ft below ground and this pump is able to fill a 5 gallon bucket in under 1 minute (5.85 gpm). The controller also has worked well for my application as it shuts off when the sun isn’t shiny and runs on and pumps when it is shining. I am using 8 x 100w solar panels and still only get max rpms for about 4 hours a day. So if you think you can get by with 500w of power you will likely be disappointed. From what I can tell the controller tries to maintain ~70-75 volts by adjusting the pumps rpm’s up to 4000rpm. There really isn’t great instructions on any adjustments or settings changes on the controller to adjust really anything. I tried to press the “settings” button and it just give like a p-0 message that you can adjust but I have no clue what I am adjusting so I just least it alone. It has performed well out of the box with the default settings. Overall, it has been good so far for the money. The well company wanted to charge me 7500 for a solar pump setup so for the tots cost of this system I have saved a lot of money and still get good performance out of it. ... show more
Reviewed in the United States on April 13, 2022 by LunaDawn LunaDawn

  • It works, and works well.
The media could not be loaded. Three days in and this well pump has been fantastic. This pump (500w, 48v version) is smaller than I expected, think smaller than two wine bottles stacked without the necks. The directions have typos and larger mistakes, but the wiring instructions are correct and clear. The rest of the install is straight forward. We sent the pump 100' down and it was pushing 6-7gpm out at the surface. I then connected 300' of 3/4" PEX and a garden hose spigot. The pump was still pushing 4-5gpm. We're powering it with 4 200W solar panels in series and parallel so roughly 65V/70VOC and 500-800w depending on sun. The pump will slow down when it loses sun, but that's to be expected. Tips: You'll need three wire cable to connect the pump to the controller. The outlet is 1" barbed. It comes with three float switches, one for low water in the well, one for high water in the tank, and one for low water in a tank. The well does not turn back on when the high water float switch is no longer active, you need to use the low water float switch too or manually turn the pump off and back on. My one complaint - the controller does not remember its last state after it loses power. If you don't have any of the float switches connected and just turn off the pump, it will automatically power on the next day when it gets solar power again. If you have the appropriate float switches installed this shouldn't be a problem, but if you want to manually control the well you need to disconnect the solar panels for the well to stay off. I'm thrilled. ... show more
Reviewed in the United States on June 16, 2023 by T. Harper T. Harper

  • Solar pump for watering cattle
For the last 10 plus years we have been replacing aermotor windmills with solar pumps. The jenenseries are the last pumps we have been using and they have functioned well. An aermotor with an eight foot fan will pump roughly 1.5 gallons of water per minute. Our wells only have to be strong enough to furnish this amount of water. I can adjust the rpm on the pump to match the strength of the well. They all directly run on solar panels so the next day the pump defaults to the original (max) rpm which will often pump a weaker will off. I don't know how to contact customer service to see if there is a work around. Also, I wish they had a way to hook a 110v generator to the control box to pump all night. There are other pumps that have this feature but cost almost 5 times as much. I would buy this pump again ... show more
Reviewed in the United States on June 20, 2024 by John Nelson Dwyer

  • Power of the sun. Nine month update
Pump has been in the ground for about four days and it is working amazing on four 120 W panels Lifting about approximately 400 vertical feet. Thank you, Amazon Pump is nine months old now and is still working. Awesome I am so happy. OK it’s nine months in a couple weeks. It looks like I might have a problem. I’m not getting water up at the top of the mountain and it looks like it’s making very little pressure. I’m going to investigate. ... show more
Reviewed in the United States on September 28, 2023 by 400 feet vertical lift

  • Installed myself last year…works great
Install this to myself last year. Not too bad an install but you will need to make a trip to well store store to pick up some items depending on what you’re missing. The pump and control unit work well. I was using 3 200 watt solar panels which does work but 4 would be better. My pump sits about 300 feet down. Not sure what else to say. A great product. ... show more
Reviewed in the United States on June 11, 2023 by Kindle Customer

  • Great Product - Great Customer Service
We purchased the 500 watt, 48 volt JENENSERIES pump one year ago. Being retired from selling solar pumping systems after 30 years I am impressed with this pump and the company behind the equipment. Emails are responded to in less than a day which is more than I can say of many manufactures these days. The positive displacement, Archimedes design moves water efficiently making the most of your solar modules. Our system pumps water on fully overcast days and easily keeps up with the demand of 55 head of cattle. I am a critical consumer, especially of solar related gear and I give this product a thumbs up. ... show more
Reviewed in the United States on July 18, 2022 by Becky Brandborg

Can't find a product?

Find it on Amazon first, then paste the link below.