Search  for anything...
Naweisz

Bench Power Supply Variable 30V/10A High Precision Adjustable CC/CV Regulated Power Supply with Free Alligator Clipqs for Lab Equipment, DIY Tool, Repair, Electronic Testing,Tinkering

    • Based on 394 reviews
Condition: New
Checking for product changes
$89.67 Why this price?

Buy Now, Pay Later

As low as $14.95 / mo
  • – 6-month term
  • – No impact on credit
  • – Instant approval decision
  • – Secure and straightforward checkout

Ready to go? Add this product to your cart and select a plan during checkout. Payment plans are offered through our trusted finance partners Klarna, PayTomorrow, Affirm, Afterpay, Apple Pay, and PayPal. No-credit-needed leasing options through Acima may also be available at checkout.

Learn more about financing & leasing here.

Selected Option

Free shipping on this product

30-day refund/replacement

To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

Availability: Only 10 left in stock, order soon!
Fulfilled by Amazon
Arrives Monday, Dec 23
Order within 23 hours and 3 minutes
Available payment plans shown during checkout

Style: 30V 10A 4-Digital


Features

  • 30V 10A ADJUSTABLE DC POWER SUPPLY- 0-30 volts and 0-10 Amp outputs with 4 LED digital BRIGHT display ,with resolution of 0.01 V (10mV))and 0.001A(1mA), not LINEAR regulated PSU
  • C.C & C.V.MODES AUTO CONVERSION-The dc power supply variable is easy to adjust your desired voltage and current with coarse and fine turning knob. The constant voltage and current mode automatically switch over with load changes.
  • HIGH QUALITY& STABILITY-High quality circuit board made, and make this power supply variable stable output.It's built-in cooling fan with thermo-sensor and TWO heat sinks used will keep the power supply cool,noise reduced and life prolonged.It's set anti-reverse connection protection,and better to protect the user's device.Perfect limit current protection, thermal protection, voltage overload protection, short-circuit protection.
  • WIDE APPLICATIONS-The bench power supply variable is suitable for the electronic maintenance, electrolyzation, electroplate, lamp test, aging testing, battery charge, laboratory, teching, and DIY tools. Great tool for electrical engineering student.
  • WHAT YOU WILL GET AND ENJOY- 1*dc bench power supply host,1*quality standard 4mm Alligator Clip Leads with Banana Plug 20 inch length;1* US power cord, 1* user manual.You could enjoy 30-day free-returned, 24-month warranty,and lifetime technology support.

Brand: Naweisz


Material: Metal


Item Weight: 1.5 Kilograms


Amperage: 1E+1 Amps


Item dimensions L x W x H: 8.9 x 3.23 x 5.43 inches


Is Discontinued By Manufacturer ‏ : ‎ No


Product Dimensions ‏ : ‎ 8.9 x 3.23 x 5.43 inches; 3.31 Pounds


Item model number ‏ : ‎ NP3010H


Date First Available ‏ : ‎ September 25, 2018


Manufacturer ‏ : ‎ NaviTech


Country of Origin ‏ : ‎ China


Best Sellers Rank: #56,407 in Industrial & Scientific (See Top 100 in Industrial & Scientific) #36 in Lab Power Supplies #61 in Life Science Supplies


#36 in Lab Power Supplies:


#61 in Life Science Supplies:


Frequently asked questions

If you place your order now, the estimated arrival date for this product is: Monday, Dec 23

Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

  • Klarna Financing
  • Affirm Pay in 4
  • Affirm Financing
  • Afterpay Financing
  • PayTomorrow Financing
  • Financing through Apple Pay
Leasing options through Acima may also be available during checkout.

Learn more about financing & leasing here.

Similar Products

Top Amazon Reviews

    • Works, numbers light up niceu
Style: 30V 5A 3-Digital
Review Image by AJS AJS
Purchased this to anodize aluminum in the .58 square foot size using the low current density method. Also successfully used it for etching aluminum. Works well for constant current. Numbers were easy to read, and no overheating problems with 2 hour runs. I didn’t test it for accuracy against a multi-meter. It has no hum. Nice small profile. ... show more
Reviewed in the United States on February 11, 2024 by AJS AJS
    • Simple, accurate, functional
Style: 30V 10A 4-Digital
Both voltage and amperage are easily adjusted with both coarse and fine adjustments. The posts are set up to take a variety of leads and has side holes to accommodate a simple wire without end plugs. For the money, it's solid. I use it to inject voltage into various areas of motherboards for troubleshooting and it is helpful to have a power supply that can lock the voltage and draw current as needed or lock the current and draw voltage as needed. The display is quite clear and large enough to see at a distance well beyond arms length. Hope this helps. ... show more
Reviewed in the United States on June 3, 2022 by A. Bailey
    • A good portable switching power supply with only a couple negative points
Style: 30V 10A 4-Digital
This is a review of the NaviTech NP3010H power supply received on 9/23/2019. Low voltage and low current setting control is good. Turn coarse voltage or current all the way to zero when needing low values. Voltage adjustment: With coarse voltage = 0V, fine adjusts from 0.00V to 3.55V, with 0.01V precision Current adjustment: With coarse current = 0A, fine adjusts from 0.000A to 0.958A, with 0.001A precision Meter accuracy (Agilent 34411A 6-1/2 digit multimeter used for these measurements) VoltageSet VoltageMeasured 0.80V 0.799V 1.20V 1.194V 3.30V 3.291V 5.00V 4.991V 10.00V 9.983V 20.00V 19.994V 30.00V 29.901V 32.00V 31.906V CurrentSet CurrentMeasured 0.100A 0.0896A (25ohm load) 0.500A 0.4885A (25ohm load) 1.000A 0.9715A (0ohm load) 2.000A 1.9505A (0ohm load) 3.000A 2.9307A (0ohm load) 5.000A 4.8940A (0ohm load) 10.00A 9.82222A (0ohm load) 10.18A 10.0002A (0ohm load) Power supply noise (Tektronix MDO4104B digital oscilloscope with 20MHz bandwidth limit enabled for these measurements) 50.2mV peak-peak, 2.45mVrms (25ohm load at 12V, DC-20MHz, 100Meg samples/sec) 26.3kHz time domain switching peaks 6.02MHz and 14.1MHz frequency domain peaks Startup Transient Response 9.3ms 10-90% rise time from cold turn on 0 - 12V into 25 ohm load 21.5ms settling time to within 50mV of 12V (25ohm load) 19.8ms settling time to within 50mV of 12V (no load) No overshoot in either case. Note: Current limit must be set high enough to remain in voltage mode. If not, I did see 0.58V overshoot on the 12V startup transient. Shutdown Transient Response 89ms 12V to 0.5V into 25 ohm load 6.00s 12V to 0.5V into no load Shutdown transient response depends upon the load, and if there's no load, can take 6 seconds from only 12V. Front panel binding posts lack a center hole to thread heavy gauge wire through. Wire tends to slide off the binding posts even when tight. If you bend the wire in a half circle the diameter of the binding post, it holds better. This is the weakest feature of this power supply. Current metering accuracy is pretty bad at low currents, 10% error at 0.100A current set. Besides the two above negative points, the rest of the power supply performs very well for a switcher. I really like how small and lightweight it is. I'm using it for power input to a 3-phase stepper controller to drive a brushless DC motor, power for a 12V air mattress blower, power for a 12V compressor to pump air for car tires, and power for charging sealed lead-acid batteries on replacement UPS (uninterruptible power supply) batteries. When charging the valve regulated sealed lead-acid batteries, I use 14.2V with a current limit of 1A. The changeover from 1A current limit to 14.2V voltage limit is smooth as the current drops to less than 50mA @ 14.2V when fully charged. ... show more
Reviewed in the United States on October 25, 2019 by Jon B.
    • good power supply
Style: 30V 10A 4-Digital
Arrived fast, it's a good power supply, instruction are easy to understand
Reviewed in the United States on February 2, 2024 by Hector Carbajal
    • Nice Power Supply
Style: 60V 5A 3-Digital
Easy to use with adjustable Voltage and Current limits.
Reviewed in the United States on February 7, 2024 by John A. Whitehead
    • Defective Junk
Style: 30V 10A 3-Digital
Review Image by Karen Karen
Review Image by Karen Karen
Review Image by Karen Karen
Severe quality control issues. These are photos of the unit 30 seconds after opening the box. Apparently the manufacturer doesn't care what condition the units ship in.
Reviewed in the United States on July 9, 2024 by Karen Karen
    • Extremely nice supply for the money
Style: 60V 5A 4-Digital
After trying out a few other budget options, this on is a definite keeper. Let's start with the CONS.... - The potentiometers are touchy. Even the the "fine" know feels way too touchy when you get the 4 digit unit. I would have liked muti-turn knobs a lot better, but to be honest, the knobs are OK, just not perfect. - The fan speed is proportional to the current drawn, not how hot the power supply is. This is weird, but hey, it's a pretty small con. - Depending on how clean of a power supply you need and how quick of a reaction you need, this PS may not be ideal for you. I haven't tried it on radio equipment yet, but there are a few tens of millivolts of noise and the output capacitors are fairly large so the transition from CV to CC is relatively small and may burn current-sensitive components like LEDs if you set your voltage too high and count on the CC to save you. And now for the PROS... - This power supply does pretty much what it needs to do and at $120 for the 300W 4 digit version, it is definitely worth it. I have charged lead acid batteries, excited alternators, and run digital electronics at all sorts of voltages and current levels for long hours and the power supply keeps going and doesn't get hot. The current and voltage displays are very close to my Fluke 87 and someday I will calibrate both to get even more confidence out of the reading. You don't really need the 4-th digit as the accuracy is not that great, but I find it convenient to have for not that much extra $ The form-factor of this PS is amazing. It is tiny, light and convenient. I don't know how to praise it more.... All I can say is: If you're in the market for a mid-range bench power supply and if you can afford this, definitely get this on. I needed the 60V option where the offerings are more limited and this product fit my bill and needs perfectly. I would have payed a little more for a 10A version if one was available and as nice as this one. ... show more
Reviewed in the United States on September 14, 2019 by E Popov
    • Product works well; customer support is great
Style: 60V 5A 3-Digital
This power supply unit works great. But after almost one year of daily use, it broke. I got a very strong burning smell one day and the power supply soon stopped working. After contacting the seller, I got a response within hours. Sent in some pics of the internals for them to confirm the issue. Eventually a replacement unit was sent out under warranty. I am very happy that my set up is working again! ... show more
Reviewed in the United States on July 27, 2022 by Kyle Lau

Can't find a product?

Find it on Amazon first, then paste the link below.