Prop Puller Inboard Boat,Inboard Prop Puller Kit,C Clamp Propeller Puller Tool for Ski/Wakeboard/Surf Propellers Fits 3/4" to 1-1/8" Shaft

Features

• Function -- Designed to pull a 3 or 4 blade inboard ski, wakeboard or surf propeller.Remove even the most stubborn props easily with this industrial strength traditional style prop puller.Letyou enjoy your time on the water,instead of laying on the ground fighting witha stuck prop.
• Fitment -- Fits 3/4" to 1-1/8" shaft diameters, Works great on tournament ski boats and other inboard with a 1-1/8" maximum shaft size.The puller jaw opens from maximum of 3.25" to 4.5".Clearance required between propeller hub and strut is 1/4"minimum.(NOTE: Must have dimple in end of shaft to use)
• Replacement -- Alternative to Part #PULR-PT-POINT in terms of function and performance.
• Advantages -- The tool has an exclusive swiveling screw point which could prevents damage to the ends of drive shafts.These tools have fine thread screws to enable a strong pulling force with little effort.Designed to remove 2, 3 and 4 blade propellers on inboard shafts.
• Material -- Cast from 8630 steel alloy, this puller is heat treated for strength and black coated for rust and corrosion resistance.Capable of handling over 150 foot lbs of torque, this cast puller is much stronger than bronze or stainless steel pullers.

Description

Fitment:For removing your Ski / Wakeboard / Surf Inboard Prop. Works on 3/4" to 1-1/8" shaft, works great on tournament ski boats and other inboard with a 1-1/8" maximum shaft size. Clearance required between propeller hub and strut is 1/4" minimum. (NOTE: Must have dimple in end of shaft to use.) Design: 1. Jaw opens from maximum of 4.5" to 3.25". 2. Designed to remove 2, 3 and 4 blade propellers on inboard shafts. 3. These tools have fine thread screws to enable a strong pulling force with little effort. 4. The unique rotating screw tip design prevents damage to the end of the drive shaft, and has fine- threaded screws to easily achieve strong tension. 5. Remove even the most stubborn props easily with this industrial strength traditional style prop puller. Specifications: For: Ski/Wakeboard/Surf Propellers Fits 3 or 4 Blade Prop Designed to pull a 3 or 4 blade inboard ski, wakeboard or surf propeller, this is a must-have tool to keep on board if you want to carry a spare prop. Fits 1“ and 1-1/8" Shaft Fits 1“ and 1-1/8" shaft diameters, Works great on tournament ski boats and other inboard with a 1-1/8" maximum shaft size. Easily Operation The shaft taper make it extremely difficult to remove the prop when replacing it, but, with this tool, you can simply and quick loosen it, you won't take 15 minutes to do the whole job by following operation guidance.Packing List: 1Drive Axle Puller 1Screw Cap

Manufacturer: ‎PR001

Brand: ‎NBWIYQP

Item Weight: ‎2.44 pounds

Package Dimensions: ‎9.8 x 4.37 x 2.28 inches

Item model number: ‎PR001

Manufacturer Part Number: ‎PR001

Date First Available: March 23, 2022