Search  for anything...
Byrd Tool

OEM Shelix cutterhead for Dewalt planer DW735

    • Based on 138 reviews
Condition: New
Checking for product changes
$479.00 Why this price?

Buy Now, Pay Later

As low as / mo
  • – Up to 36-month term with PayTomorrow
  • – No impact on credit
  • – Instant approval decision
  • – Secure and straightforward checkout

Ready to go? Add this product to your cart and select a plan during checkout. Payment plans are offered through our trusted finance partners Klarna, PayTomorrow, Affirm, Afterpay, Apple Pay, and PayPal. No-credit-needed leasing options through Acima may also be available at checkout.

Learn more about financing & leasing here.

Free shipping on this product

Eligible for Return, Refund or Replacement within 30 days of receipt

To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

Availability: In Stock.
Fulfilled by Holbren Tool
Arrives Nov 27 – Dec 4
Order within 4 hours and 51 minutes
Available payment plans shown during checkout

Features

  • This DW735 OEM cutterhead is machined slightly larger to give you a cutterhead that is the same size as the one you are removing. You will need to remove the inserts from the cutterhead prior to install, and then replace them after the cutterhead is in place.
  • Staggered, spiral carbide insert configuration provides a shear, rather than straight cut for a smoother finish and quieter operation.
  • Helical insert knife configuration breaks up chips, making dust collection easier.
  • Replace individual inserts when dull or damaged, rather than having to replace an entire expensive knife blade; comes with 5 replacement inserts.
  • Made in the USA!

Description

The ORIGINAL SHEar & heLIX spiral cutter non grind design! Made in the USA by Byrd Tool Corp., these indexable carbide insert cutterheads provide a shear, staggered cut instead of a single, straight knife cut. Not only does this provide a superior finish on your work piece, it is a lot easier on your dust collection system because the configuration of the inserts breaks up the chips. Another benefit to the indexed insert design is ease of maintenance. Dull or damaged insert knives are individually replaced, a much more cost effective option than having to replace expensive knives the full length of your planer head. Each cutterhead comes with 5 extra inserts and a torque driver to aid insert replacement. The Dewalt DW735 replacement cutterhead now comes in two sizes. The original was sized slightly smaller (.0078 inches) than the OEM cutterhead in order to fit through the hole in the chassis with the inserts still mounted on the cutterhead. This OEM cutter is machined slightly larger to give you a cutterhead that is the same size as the one you are removing. You will need to remove the inserts prior to install, and then replace them once the cutterhead is in place.

Manufacturer: ‎Byrd


Part Number: ‎Dewalt P131519-1/B


Item Weight: ‎5.99 pounds


Package Dimensions: ‎20.39 x 6.22 x 4.09 inches


Item model number: ‎Dewalt P131519-1/B


Material: ‎carbide


Voltage: ‎120 Volts


Item Package Quantity: ‎1


Batteries Included?: ‎No


Batteries Required?: ‎No


Date First Available: June 11, 2021


Frequently asked questions

If you place your order now, the estimated arrival date for this product is: Nov 27 – Dec 4

Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

  • Klarna Financing
  • Affirm Pay in 4
  • Affirm Financing
  • Afterpay Financing
  • PayTomorrow Financing
  • Financing through Apple Pay
Leasing options through Acima may also be available during checkout.

Learn more about financing & leasing here.

Similar Products

Top Amazon Reviews

    • Produces beautiful finish, low noise level,
This product is absolutely amazing and is the best upgrade you can do to any tool or woodworking machine I can think of. Amazing how quite it is compared to the blades that SCREEM as they chop along. The thing is slicing and the finish is just beautiful and every woodworker deserves this quality for their projects. Seriously the finish produced with this cutter head in the DW735 is as good or better than any planer I have own and I have owned a number of large, expensive machines. Just a few comments of those negative reviews, most of which have come about with people not understanding the proper procedures for installing the Shelix head and especially removing and installing the cutters. Many of the on line videos of this installation are being done incorrectly, especially installing the individual carbide cutter. Follow the directions closely and you will not have any problems, especially installing the cutters which must be positioned FLAT on the head allow the screw to pull/push the cutter back against the alignment wall. Do NOT allow the cutter to sit against that back wall until they are dead flat on the bottom surface. The screws and screw holes are not designed to align exactly over each other, which is what some are doing, and that means the cutter segments are not flat on the surface and they are misaligned and can be broken when tightened, and they will produce streaks that some are talking about. Just watch the companies website videos and you will be fine. I found it helpful to wrap the head without the cutters, in blue painters tape and slowly insert it into the planner. When resistance is felt, try moving the end of the cutter head slowly, left or right, up or down and you be able to step the each segment platform through the cutter hole one at a time. I had to remove the small gear on one end of the shaft and install it after the cutter head was installed in the machine, as it was preventing me from moving the shaft forward as it approached the far end bearing race. I found it easy to set the bearing and head into the planner races by putting the shaft pulley nut flush on the shaft and then striking it lightly with a large rubber hammer. It provides a much larger surface to distribute the rubber hammer strikes. A little light weight oil wiped on the races and bearing also help with the install. Most of the videos on line show the cutters being installed with a power driver, or one handed just cranking away, big mistake. One hand should be sliding the carbide and holding it FLAT on the base and the tightening screw will help pull it back to the alignment wall. You can use your thumb to make sure it is flat, then slide it toward the wall and tighten. The SCREW HEADS will not be flush in the cutter holes, they are designed to be slightly offset as that is what holds the carbide cutter tight and properly aligned. Hope this helps others, this is a fantastic product but you have to install it correctly. ... show more
Reviewed in the United States on May 6, 2022 by Gtin
    • Amazing product, perfectly smooth result
I initially had several cutters not seated correctly after installing in my planer. This creates an uneven surface with gouges and lines. However, if you press on the back of the insert so that the front tips up as you tighten the screw, this will correctly seat the cutter every time. This cutter head does a great job, I just love the smooth finish. If there are any issues, it’s because there are cutters not seated correctly. ... show more
Reviewed in the United States on February 8, 2024 by bookie22
    • A big improvement...but not an easy install.
The end result of this highly regarded modification speaks for itself. The machine runs much quieter, with outstanding cutting results: say goodbye to snipe. Such an improvement, very pleased so far. That being said, I consider myself pretty handy, but I admit I was intimidated at the prospect of undertaking this installation. The .pdf instruction manual, available for download from the manufacturer's web site, is pretty thorough, and the photos are helpful. That being said, some parts of the installation weren't as easy as it looks, at least for me. Re-assembly instructions are limited to "install in reverse order of disassembly." Okay, great, but they don't really tell you, for example, the best way to get the belt back on the pulley, so you are left to your own devices. I set aside some time on a weekend, had a clean area to set aside disassembled parts, and managed to finish in a couple of hours. While most of the tools required for installation are standard, you'll need some snap ring pliers and a 15/16" or 24mm socket and socket wrench will be helpful. I've read some of the complaints about having to remove and re-install the cutter heads on the full size cutter, but really, that for me was the easiest part of the installation. Overall, very pleased. An expensive upgrade, but worth it. ... show more
Reviewed in the United States on July 23, 2023 by Martiniman
    • What a difference!
I bought this OEM Shelix cutterhead a while ago and just recently installed it. I watched a video prior to installing so I knew what to expect. If you have the patience and tools readily available (snap ring pliers, etc) the install should not take more than 90 minutes. Everything included was high quality and the difference in sound, cut quality, and reduced snipe was very noticeable. I should have installed it sooner. Highly recommend this upgrade. ... show more
Reviewed in the United States on January 14, 2024 by E. Murphy
    • So glad I switched
I have been wanting to do this upgrade for the past year. I finally had the opportunity to purchase it. You’ll need to give yourself 2 to 3 hours to install the new head. The printed instructions are so so but YouTube has a lot of great videos you can watch. I particularly like the video by The Snekker Show. Ben was very detailed and took you through every step along the way. He also provided great tips and tricks, especially in regard to reinstalling the 40 cutting heads. Because of his video, all of my cutting heads were installed perfectly the very first time. I did not have to adjust any of them. Like many others have said, the noise reduction by switching from Dewalt blades to the Shelix head is dramatic. Using a decibel meter on my phone my planer is now 20 to 25 dB lower than it used to be. The surface of my boards after being planed are much smoother now as well. I also haven’t had any issues with snipe since switching the cutter head. Overall, I am very impressed with this Shelix cutter head, and think it is worth every penny. I wish I had purchased this a year ago. If you do a lot of planing, then I highly recommend you get this Shelix cutter head. Also, go with this OEM version and not the smaller sized version. It is well worth the extra effort to install. ... show more
Reviewed in the United States on February 26, 2024 by Michael Leonard
    • Possible 5/5 but Carbide Insert came Chipped
Review Image by Amazon Customer Amazon Customer
Review Image by Amazon Customer Amazon Customer
Overall the cutter head could have earned a 5/5 but one of the carbide inserts was chipped. Everything else lived up to the hype.
Reviewed in the United States on February 26, 2023 by Amazon Customer Amazon Customer

Can't find a product?

Find it on Amazon first, then paste the link below.