Search  for anything...
AISIN

AISIN TKH-002 Engine Timing Belt Kit with Water Pump - Compatible with Select Acura MDX, RDX, RL, RLX, TL, TLX, TSX, ZDX Honda Accord, Crosstour, Odyssey, Pilot, Ridgeline Saturn Vue

    • Based on 2,186 reviews
Condition: New
Checking for product changes
$194.99 Why this price?

Buy Now, Pay Later

As low as $32.50 / mo
  • – 6-month term
  • – No impact on credit
  • – Instant approval decision
  • – Secure and straightforward checkout

Ready to go? Add this product to your cart and select a plan during checkout. Payment plans are offered through our trusted finance partners Klarna, PayTomorrow, Affirm, Afterpay, Apple Pay, and PayPal. No-credit-needed leasing options through Acima may also be available at checkout.

Learn more about financing & leasing here.

Selected Option

Free shipping on this product
This item's return window has been extended for the holiday season: Returnable until Jan 31, 2025

To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

Availability: In Stock.
Fulfilled by Amazon
Arrives Tuesday, Nov 26
Order within 4 hours and 54 minutes
Available payment plans shown during checkout

Style: Belt Kit


Features

  • AISIN's Water Pump/Timing Belt Service Kit is the common-sense combo as these components should always be replaced at the same time regardless of which component needs replacement
  • The work involved in replacing one of these components is about the same as replacing all of them - save yourself time and money in the long run by replacing all components at the same time
  • AISIN's kit includes OE matched components, just like the ones your vehicle left the assembly line with - no generic parts here, just the brand names you know and trust - AISIN, Mitsuboshi, Toyo, NTN, and more
  • AISIN is the #1 OE manufacturer of water pumps in the world; each pump features an advanced diecast aluminum housing and premium internal components with carbon ceramic seals for superior durability
  • Kit includes OE matched components: Water Pump, Timing Belt, Tensioner, Pulleys, Gasket, and Installation Instructions - all packed in one convenient box, ready to install
  • Compatible with select vehicles (Note: Engine may affect fitment - verify specific fitment details with fit checker above): ACURA: 2008-18 MDX, 2013-18 RDX, 2005-12 RL, 2014-18 RLX, 2004-14 TL, 2015-18 TLX, 2010-14 TSX, 2010-13 ZDX; HONDA: 2003-17 Accord
  • Compatible with (continued): HONDA: 2010-15 Crosstour, 2005-18 Odyssey, 2005-18 Pilot, 2006-14,17-18 Ridgeline; SATURN: 2004-07 Vue

Description

AISIN's Water Pump/Timing Belt Service Kit is the common-sense combo as these components should always be replaced at the same time regardless of which component needs replacement. The work involved in replacing one of these components is about the same as replacing all of them - save yourself time and money in the long run by replacing all components at the same time. AISIN's kit includes OE matched components, just like the ones your vehicle left the assembly line with - no generic parts here, just the brand names you know and trust - AISIN, Mitsuboshi, Toyo, NTN, and more. AISIN is the 1 OE manufacturer of water pumps in the world; each pump features an advanced diecast aluminum housing and premium internal components with carbon ceramic seals for superior durability. Kit includes OE matched components: Water Pump, Timing Belt, Tensioner, Pulleys, Gasket, and Installation Instructions - all packed in one convenient box, ready to install.

Brand: AISIN


Material: Aluminum, Ceramic


Item Weight: 4.2 Pounds


Vehicle Service Type: Car


Global Trade Identification Number: 96


Manufacturer: Aisin


Manufacturer: ‎Aisin


Brand: ‎AISIN


Model: ‎TKH-002


Item Weight: ‎4.2 pounds


Country of Origin: ‎Japan


Item model number: ‎TKH-002


Is Discontinued By Manufacturer: ‎No


Exterior: ‎Machined


Manufacturer Part Number: ‎TKH-002


Date First Available: October 28, 2010


Frequently asked questions

If you place your order now, the estimated arrival date for this product is: Tuesday, Nov 26

Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

  • Klarna Financing
  • Affirm Pay in 4
  • Affirm Financing
  • Afterpay Financing
  • PayTomorrow Financing
  • Financing through Apple Pay
Leasing options through Acima may also be available during checkout.

Learn more about financing & leasing here.

Similar Products

Top Amazon Reviews

    • 2011 Odyssey
Style: Belt Kit
All fit for my 2011 Odyssey. Looks to be good quality. Happy with purchase, fit, no issues.
Reviewed in the United States on September 9, 2024 by Nowaks
    • This is everything that you need to get this done.
Style: Belt Kit
My Odyssey is old. It's a 2008 with 149K on it. It had 110k when I bought it, thinking that I'd drive it for a couple years and then get something better. Well, things have changed. I can't even find anyone selling the new car that I want, and a three-year old one with 50k miles costs about as much as the MSRP for a new one. Soooooooo, the old Odyssey is going to be here a while. I;ve grown fond of it - it makes a pretty fair truck. If I pull the seats out, I can stack a crapload of 4x8 sheet goods in the back. We've got to get cracking on the maintence if this pony's going to stay in our stable. YouTube is a big help. Lots of folks post helpful videos showing exactly how to do this medium-difficult job. I checked Amazon for the parts, and found them selling this kit as a Warehouse Deal for $50 off, putting this original-equipment kit in the same financial neighborhood as the ones stamped from pot metal in some basement in South Shanghai. WooHoo! It said that the packaging would be damaged (it was) but everything inside was pristine. The most difficult part of this job is removing the crankshaft bolt. It is installed at the factory with a special nuclear-powered torquing device, powered by the energy of a thousand suns. You will break things trying to get it off. You may get hurt. You will certainly use words that you would never use in front of your kids, or even your wife, as you pull the shattered chunk of snapped 1/2" impact extension from your bleeding forearm as the bolt just sits on the pulley, mocking your puny efforts. Many people say that this task should be attempted first, as if you can't remove this bolt, it's best to just send the parts back and get the credit card ready for a $2K bill from your friendly mechanic, who will heat that bolt with a torch to get it loose, not caring that the rubber insert in the crank pulley will be forever damaged by the heat. It's not HIS car, after all. There is a solution. A lump of metal, dropped to the Earth from the gods - a solution so simple that you can't believe that it would work. It is the Lisle 77080. A half-inch drive 19mm impact socket. What, you say? It can't be that simple? You already HAVE a 1/2 drive 19mm? No. You don't have THIS socket. It's easily 3x as thick as your puny Harbor Freight socket and weighs 3x as much. The idea is that all that extra mass transmits more of the bang-bang from your impact tool into the bolt, and less into the atmosphere. My experience.... I sprayed PB Blaster (there's nothing better) at the crank bolt's surface, waited while I ate breakfast with the missus, and then went out there and put my 120v plug-in Porter Cable 1/2" impact on the bolt in unspin mode. Sixty seconds of nerve-wracking, arm shaking, anvil banging attempts proved fruitless, and since I was starting to smell weird electrical smells from the tool, I decided to give the bolt a break, spraying it again liberally with liquid slipperyness and going back inside for a second cup of coffee (recommended for occasional mechanics). Half an hour later, back for Round 2. Put the tool on the bolt, hit the trigger on the hand-held bolt hammer and the bolt didn't last five seconds. At this point, I was committed to the job. Everything came off easily, just like in the video. I used an M12-powered Milwaukee battery ratchet to save time, and it saved a bunch of it. Thinking about all that ratchet-spinning and knuckle-busting that I was missing made me smile. As it turned out, the old timing belt was oil soaked due to an old serious oil leak from the cylinder-disabling solenoid at the left-front of the engine, something I replaced the week I bought the Odyssey. Other than that, it looked pretty good for almost 150K miles. The old water pump looked good as well. The pump in this kit was a perfect match for the original one that I removed. There are some substandard parts out there, but this certainly isn't one of them. It went on like it was supposed to and so did everything else. All the parts in this kit seemed to be quality items - especially the tensioner. It was indistinguishable from the one that I removed - it was just cleaner. The idlers, likewise. Nice stuff that matched the original parts in performance and appearance. Be aware that the camshaft sprockets are fighting against some valve springs and will be waiting for the first chance they can get to move a bit while you aren't looking. Check your marks. Check your marks. Check your marks. I had everything where it was supposed to be and was about to pull the pin from the tensioner when I dedided to check just one more time..... Yup, I was one tooth off on the rear cam. Easy enough to fix at that point. More difficult if I had pulled the pin..... Rotate the engine a couple of times after (clockwise, unless you want to take the belt off and time the engine again). Check your timing marks a few times until you are certain that it's right. If you removed the spark plugs, the engine's easy to rotate. The maintenance interval for the plugs is the same as the timing belt, so make your life easy and do that at the same time. Once you're satisfied that the belt is installed properly, it's just a matter of bolting on all the bits that you removed to get to the belt, adding coolant and cleaning up. Drop your clothes on the laundry-room floor, go take a shower and make yerself a drink. You've earned it. If you did everything right, your engine will run exactly the same as it did before you started, which will be difficult to explain to your wife. ... show more
Reviewed in the United States on April 28, 2022 by Mbonnie
    • Amazing OEM parts!
Style: Belt Kit
Review Image by kehlyn kehlyn
Everything fit and went together smoothly. Can’t go wrong with OEM parts. Love the quality work.
Reviewed in the United States on October 6, 2024 by kehlyn kehlyn
    • No issues
Style: Belt Kit
This kit is probably the best deal you can get on the Honda v6 timing belt from a VERY reputable parts brand. I really dont understand the people who are buying the 70 dollar kits from shady places and spending a day installing them. Just moronic imho. This is an amazing balance between price and oem level quality ... show more
Reviewed in the United States on October 16, 2024 by Joe
    • Very good product 👌
Style: Belt Kit
This kit is working very good on 08 Acura mdx AWD
Reviewed in the United States on October 27, 2024 by angel 01
    • Buy This Kit! It is perfect for the 2010 Honda Odyssey EX-L 3.5L I-VTEC
Style: Belt Kit
Stop looking and just get this kit, one by Gates, or the original Honda. Don't be cheap with your interference engine. Do the job with the right parts, and watch plenty of youtube videos. The quality is superb and the fitment is perfect. I thought the engine was ticking at 180,000 miles, but it was actually the timing belt tensioner. If you hear ticking from this engine, DON'T ignore it. Get it checked as soon as possible or you will risk having to look for a new engine. ... show more
Reviewed in the United States on November 4, 2024 by April Mikolowski
    • And the kit parts seem fine to me
Style: Belt Kit
Executive Summary: If you're going to invest the time to disassemble all the parts needed to get to the timing belt it only seems sensible to replace all the stuff included in this kit. And the kit parts seem fine to me. I'm not a mechanic .... so my opinion isn't worth much. But I decided I could save >$1,000 by replacing the timing belt myself on my 2005 Honda Pilot with 132,000 miles. Yeah, I stretched the replacement cycle a bit. I'm writing this from a rented condo in Florida. We just drove 1,700 miles to get here so I guess I can say the job worked out .... so far at least. THANK GOD for YouTube. I would never have tried to do the job but for the really good videos there. I watched 3 different ones carefully and then made a flow chart of the order of operations; the job broke down into about 50 steps for me. And it was a good investment of time for an amateur. The space is quite tight and you have to reassemble in a specifc order or you can't fit the parts back into place. The parts in the kit seem fine .... but I have no real experience .... so how can I compare and judge? I can say that it makes sense to me to get the kit and replace all the stuff provided. It seems foolish to not replace the water pump and timing belt tensioner etc. once you've made the substantial investment of getting it all apart. My old tensioner was leaking a bit of oil; it might have gone another 100,000 miles .... but maybe not? A couple of things: You have to get the crank bolt free before you can proceed at all with the job. I broke 2 extension bars on mine; it would NOT break free. So I took the vehicle down to my local mechanic (that I trust) and he broke it free with his air impact driver that has 700 ft/lb of force .... and he really had to work at it too! We get lots of salt on our roads in the winter and after 12 years mine was welded on. I could never have broken it free with my amateur tool set. He charged me $42 .... a huge bargain and lesson that sometimes there is no substitute for the "big boy tools". A couple of the bolt heads on the timing covers were rusted so badly I was worried I wouldn't get them off. I had to gently tap a 3/8" socket onto the rusty .... and now smaller bolt hex .... to get enough grip to break them free. Then I was gouged for a couple of new ones at $6 each from the Honda Dealer to reassemble. The job calls for a bunch of the fasteners to be torqued to 9 f/lb and I couldn't find a torque wrench that I was satisfied with for that range. Most seem to be made for 10 - 50 and I needed 5 to 50 because you want to avoid using the 10% of the tool's range at either end of its capability. I've read they just aren't very accurate at the edge of their range. I ended up testing the feel of 10 ft/lb on a nut in my bench vise and then did the job by hand feel ... sort of ridiculous but it seems to have worked so far. Anyway .... summary .... the kit materials seem fine and it makes sense to me to do the whole kit job. ... show more
Reviewed in the United States on March 19, 2017 by Northern Secret

Can't find a product?

Find it on Amazon first, then paste the link below.